Jump to content

Clutch Issue


skymera
 Share

Recommended Posts

Yeah they (EK4/EM1) just don't have the LSD which isn't the end of the world! 

 

I wonder if it's possible to fit the lsd or maybe swap the ratios/final drive from the s4c into the s9b.

Link to comment
Share on other sites

I wonder if it's possible to fit the lsd or maybe swap the ratios/final drive from the s4c into the s9b.

Should be, I believe all the gearboxes on the B series are essentially the same so parts should be interchangeable to a point?

Link to comment
Share on other sites

It's All about s4c/y21 for me. Dirt cheap and better acceleration but can still hit 150mph at just over 8k.

dam thats good i did a top speed run the other week n topped out at 132 how come the s4c has a longer final drive
Link to comment
Share on other sites

Holy crap, that's more than twice what i paid!

Although, mine was an auction that i stumbled across an hour or so before it finished with no other bidders.

 

They are always the best ones ! ;-)

 

 

Should be, I believe all the gearboxes on the B series are essentially the same so parts should be interchangeable to a point?

 

Now thats a good idea .....

Link to comment
Share on other sites

dam thats good i did a top speed run the other week n topped out at 132 how come the s4c has a longer final drive

It hasn't. It's 4.4fd but has a relatively long 5th.

Top speed is higher on the s9b. Probably 155mph on the right size wheels.

I used to find my M struggling at high speed although it would top out 5th with enough road. The eg with a bit more power no problem getting up there at all.

Also I don't miss the lsd at all either. I rarely launch the car and cornering is unaffected imo.

  • Like 3
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...