civicturbo79

Top class mate you have a nice looking car there . Rich.

cool nice one mate get some pictures up rich

How did i get in the running ? i have no vote box and i dont think i voted already . Rich.

Exhaust look good get a video of the exhaust so we can hear how it sounds . Rich.

you are right you cannot fit the bigger injectors till you have the managment fitted . so you can tell it what size the injectors are . if you just fit new injectors it would not run. 440 will be more the big enough. Rich.

The fuel pressure will be fine at the min as you are not adding more fuel once you get into the map and the fueling is going up the fuel pump will not keep up ( i did this with mine ) you will need injectors as well the standard ones will not give you fueling for 10 psi . maybe 3 psi at a push. Have you got a vacuum pipe going to the waste gate ? Rich.

You waste gate spring sets the boost pressure . the waste gate comes with a 3 psi spring in there . you can do two things . buy the psi spring you want and fit it or fit a bleed valve . to do this fit the valve in the vacuum pipe that runs to the waste gate the more you wind it in the higher the boost . As for management i assum you need to keep that standard ecu for the auto gearbox (gearchanges) I had a greddy e-manage blue on my car right up to 379 bhp . http://cgi.ebay.co.uk/TRUST-GRreddy-Ema ... 286.c0.m14 Its a piggy back ecu so you can leave the standard ecu in place for the gearbox . The standard map sensor will read boost up to 12 psi . but the ecu will put the light on a soon as it see's boost because it does not know what it is . you will need a map sensor for the e manage http://cgi.ebay.co.uk/Boost-Map-Sensor- ... 286.c0.m14 You will also need a welbro 255 fuel pump . http://cgi.ebay.co.uk/WALBRO-255-FUEL-P ... 286.c0.m14

Super mate i love it .can you put a link up for the restictor as ill give one a go. Rich.

looks nice keep up the good work. Rich.

Well done mate .

I think we oh it to the car . lets give her a good send off.

1.b18beans - east coast - t***bvp 2.chrisvtis - somerset - W***YOC 3.civicturbo79 - Midlands - V***HJU 4. 5. 6. 7. 8. 9. 10.

my brother has one V***HJU (Hinckley Leicestershire) but he is not on the internet.

you will make a list of what to do and you always add to it + it always costs loads more than you set a side .

top car well done

I had a hard time picking a winner 3 top cars G-units car, super clean Blames car, fell in love with it as soon as i saw its A1. ( got my vote ) Strictlyboost, loverly car + alot of mods, ie turbo'd it was hard for me not to vote for this car.

Cheers mate im over the moon about it

Thank you to those that voted for the car im over the moon about it being car of the month.

So who did win car of the month then

Some old pictures of the car before it was painted with 2 of the other mb6's i helped build after a dyno day at street racers in leicester. i set it up 2 dyno days for the colt czt forum that my other half is part of and i brought a few mb6's along to put to show them what a honda engine came do . . mb6 pictures are from the first one and the colt pictures are from the second one.

i just looked through my project tread and saw there are no pictures of the hole car and stuff just the engine build so i have add more pictures .

more pictures as i see there is non of the hole car .

i would like to put my car forward.

tell me about it ran again today

its a hard one to explane it looks amazing in the sun . the car was painted black then a bmw dark green and then a blue emerald metel flake pearl on the top to give it its green to blue flip then metel flake in the sun is amazing everyone loved the colour at the rising sun . the down side is the sun has to out for the colour to work or it just looks green .