Jump to content

simpo

Civic5 Supporter
  • Posts

    5,940
  • Joined

  • Last visited

  • Days Won

    12

Everything posted by simpo

  1. Wtf how low lol you must of been rocking on every speed bump. Oh nice S too
  2. Bet it don't stay that colour lol
  3. simpo

    Back pressure

    Missing 2 bends and a long backbox ! If I move it an have new pipe in would be like aving it all there
  4. Will get a pick soon. Sounds no different really no like a b18 lol
  5. simpo

    Back pressure

    Normally the backbox goes along the back of car like this https://www.google.co.uk/search?q=civic+gl&client=safari&hl=en-gb&source=lnms&tbm=isch&sa=X&ei=Jn8TUrDmH8Kb0QXrxoDwCA&ved=0CAgQ_AUoAA&biw=320&bih=356#biv=i%7C22%3Bd%7Cqe5yf-SJ14LpmM%3A But now it comes straight out the oppsite side. So losing all that exhaust dunno if it makes a difference. Plus it will look better coming out the correct side
  6. simpo

    Back pressure

    Defo the exhaust just put to new gaskets on and it's 100xs better still needs moving over the other side I think! Trip to te exhaust place
  7. simpo

    Back pressure

    Yeah did plugs and leads
  8. simpo

    Back pressure

    Think it was better when it was standard but not perfect. Plus no I av fitted the mani feels worst. I had a lot of 4gen civics with straight through systems and av be fine but they all have the backbox on the correct side! But like I also said once in a blue moon it will pull like f00k
  9. Ok need a civic geek here. Lets start with i have done a full service Basically something seems to be restricting my car very badly I have a full system including manifold but the the exhaust comes out the opposite side than Wat it use to, do u think I could be losing loads of back pressure causing it to be like it is? Once in a blue moon it will pull but most of the time it doesn't! Or should I be lookin toward dizzy cap and rotor arm?
  10. Little present turned up today
  11. Wanna make me some stickers lol
  12. If you got to bump up curbs then I would say 30mm! 40mm tops
  13. Have you had a good look? As when I did my deck the holes were clogged up with cr4p! You can use standard mb6 one or mgzs which is thicker
  14. What year civic suspension are you trying to find? Just shocks or shocks and springs?
  15. Had a neighbour who was clearing out his garage and had some old civic sale mags and guess what civics were in there
  16. Can't go wrong with vtec stickers. Did u make um yourself?
  17. Exhaust was leaking a lot in that vid. Once I get new gaskets an mani on will do another one!
  18. Used that yesterday on my suspension. The last spring I went to change, where the top nut is where u use a Allen key it rounded. I was going mental, so out came the hammer lol
×
×
  • Create New...