Jump to content

MC2 Project - Chassis prep


DeLaSoul
 Share

Recommended Posts

  thebusofwoe said:
Dude SWEEEEEET build. Glad you enjoy what's best for these deck's!! Think you have just given me the push to do my deck as its in a bit of a state. Already done the ebc discs and pads all round not realy done anything else as living away from my parents is a little straining on the old account. Hoping on a lightweight flywheel and clutch aswell as the dc2 gearbox next for mine, and got access to a ramp as i work for honda anyways so happy days!! Can't stand the crappy ratios of the deck's box. Any news on fitting the manifold?? as alot of these that are advirtised for a b18c4 don't fit!! Usualy too short. Keep up the cracking work!!

Thanks mate. Not fitted the manifold yet, I've been debating on pulling the engine out over the autumn/winter for a complete rebuild so didn't want to fit it and take it off again. It looks good on the length though, but I had to source an exhaust bracket from another honda (prelude I think) to hold around the back of the engine. If I change my mind on fitting it I will post up on the install.

I know what you mean on cash though, I saved for 9 months to get all the bits and did 90% of the work myself on the build. I needed help moding the exhaust to clear the arb and doing the geo, but I would guess most people dont have a 4 post ramp and the gear to do those jobs anyway :lol:

Link to comment
Share on other sites

Cool chap, What kind of engine build you thinking?? stock new or upgrade?? Keep updated about the manifold. I was thinking about swapping a dc2 lump into mine but i think we can do so much with the b18c4 lump from parts of the dc2 anyways!! Only thing that disapoints me is the lack of a prompt VTEC noise/kick but then it is only a wagon!! :)

Link to comment
Share on other sites

  thebusofwoe said:
Cool chap, What kind of engine build you thinking?? stock new or upgrade?? Keep updated about the manifold. I was thinking about swapping a dc2 lump into mine but i think we can do so much with the b18c4 lump from parts of the dc2 anyways!! Only thing that disapoints me is the lack of a prompt VTEC noise/kick but then it is only a wagon!! :)

I was going to stick with the B18C4 block but change the pistons and rods (raise compression ratio). Head wise I'm not sure yet, B18C6 with a decent intake, uprated injectors and rail? Need a better fuel pump, and sort an ECU + remap to get the most from it. My ideal build would include a supercharger but monies won't stretch to that anytime soon :(

DC2 lumps are going for £1200+ when I looked, and I would imagine my build would be getting close to that but I would have the satisfaction knowing I built it and it was 110% inside before turning the key.

My engine is really good for an old car - noticeable IAB open and VTEC switch over - so much so it actually catches surprises people when they come out in the car!

Link to comment
Share on other sites

  civic jay said:
defo jealous of you going to the ring, did you manage to suprise any other cars with the deck?

Only after 5-6 laps once I got a little better with the lines & braking points. One M3 driver certainly had a shock :lol:

Link to comment
Share on other sites

  • 4 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...