Jump to content

Roj

Civic5 Supporter
 View Profile  See their activity

  • Posts

    1,508

  • Joined

  • Last visited

  • Days Won

    6

 Content Type 

Everything posted by Roj

  1. Roj

    tegiwa rear strut bar

    Roj replied to Gilman's topic in Chassis

    I don't see why it wouldn't fit. They also have a matching front brace.
  2. Roj
    You could always ask an exhaust shop to adapt the Toyosports system for the MB3 manifold.
  3. Roj
    M12x1.5 is correct and with alloys you need nuts that taper in.
  4. Roj

    Worst Driver ever?

    Roj replied to shaikh's topic in Chat Lounge

    A 700bhp NSX is no easy car to drive. I think the driver just didn't expect the NSX to spin up so much. Shame though, I think it would've given the 911 a thrashing if launched straight. Worst driver ever though? Probably not. I've seen worse drivers trying to handle a 1.2 Corsa.
  5. Roj
    I need a breather hose for my MB3's new induction kit but I have no idea what size hose to buy. I'd measure my own but it's currently p**sing it down with rain and it's easier to ask people on the internet. I'm looking for the inner size of the hose, or the size of the outlet pipe on the rocker cover. Pic stolen from Google to illustrate where I'm pointing at. Cheers!
  6. Roj
    I have the same problem. When I open the driver's door the interior bulb will come on but then immediately go out. With the passenger door it comes on as normal. I've just started turning the interior light on manually when it's too dark to see inside. If there's a fix I'm all ears.
  7. Roj
    No, you can stay.
  8. Roj
    I like both, which is why I had to put the VTi one in the MB3 afterwards. Only problem is the gaiter ring in the MB3 sits lower than the MB6's one so you see a bit of shaft (HA) between the knob and gaiter. There's too many knobs in this thread now.
  9. Roj
    Bagged myself a VTiS gear knob on eBay! It's not in the best condition but then if I waited for a mint one I'd probably be old enough to trade the MB6 in for a Rover 45 already. So, here's the knob. I prefer this style to the other one, just looks more normal to me. Stock MB6 knob. This will be going in the MB3 to replace the crappy £5 eBay one it came with. Comparison. VTiS knob installed! It seems to sit a bit lower than the old knob too.
  10. Roj
    Cheers. Just need the headlights now. Also Tom, how easy was it to wrap the H badge?
  11. Roj
    Once I get my new headlights When I get my new headlights I'll see if maybe I can smack some life into the pump while the bumper is off. If not I'll grab one off a breaker later down the line.
  12. Roj
    There's definitely water going through the pipe. Also I noticed a small dribble of water come out of the jet. Could it just be the pump is dying but not completely dead, so it doesn't have the power to push the water?
  13. Roj
    I'll try.
  14. Roj
    Already decided to paint it black. I prefer it when it matches the grill surround. That and that way I don't have to feel disappointed when Halfords can't colour match Sicilian Red.
  15. Roj
    Tried a thinner needle, pushed it all the way in, still blocked. Line looks fine, no leaks. Maybe it is the pump dying?
  16. Roj
    So, good news and bad news. The bad news is, the CREE bulbs I bought are too long for my fog lights and it's not really worth me sending them back to China. So I'm just going to keep them handy until the day I can find a use for them. The good news is... Bought it from Matty Reay on the Civic5 FB page. Really happy with the result. I was originally planning on colour coding the grill surround and rear boot trim but I've swayed towards going black now after seeing this on the car up close. I'm going to carbon wrap the badge though.
  17. Roj
    I'll try with a wire or a thinner needle and see how it goes. Also purchased the 5L bottle so I'll refill once I've got the blockage sorted.
  18. Roj
    Mine only recently stopped. Hopefully the blockage can be cleared somehow. I guess I'll buy the 5L bottle next time and see how it goes.
  19. Roj
    There's an MB5 Domani, it's a 1.6 with 4WD.
  20. Roj
    I can hear the motor whirring away when I try to use the rear washer jet but no water comes out. I've poked a needle inside but still no luck. Is this a common problem or could it be that I need to find a thinner needle and poke further in? Also as a precaution I topped up the screen wash but I ended up dumping the whole 2L bottle in! How much screen wash can these cars hold?
  21. Roj
    Is that it? And oh damn you've had it a while then.
  22. Roj
    Speak for yourself! How many miles are you on eh?
  23. Roj
    Didn't realise what my odometer was at when I got home earlier. So of course I had to take it round the block. Milestone reached!
  24. Roj

    Mileage!

    Roj replied to sheeraz552's topic in Chat Lounge

    Not even broken in yet...
  25. Roj
    I bought them from a member here on the forums. I'm not sure where else to get them aside from breakers if they have them.
×
×
  • Create New...