3gdean Posted January 22, 2016 Share Posted January 22, 2016 I just went to h-tune as they provide a p28 and plum it in with pcm, so plug and play as didn't trust myself , paid £550 1 Quote Link to comment Share on other sites More sharing options...
mb690 Posted January 25, 2016 Share Posted January 25, 2016 Exciting project you have here mate. That looks like a well looked after MC2 & will deffo make a strong base. Good choice on the Meister-R's, I setup my MB6 with them as well as a load of other bits a few months back and it was the best thing I ever did! Love Them! Looking forward to following this one! Quote Link to comment Share on other sites More sharing options...
hertsguy Posted January 25, 2016 Author Share Posted January 25, 2016 progress is slow at present but hopefully febuary will be the big push i need to get it all done. I went out last week and brought another Mb6, plan is to remove the Engine and box and use them to rebuild if they are in good nick, then can work on the deck while they are away getting machined and built 1 Quote Link to comment Share on other sites More sharing options...
KiNK43 Posted January 25, 2016 Share Posted January 25, 2016 That looks a beauty aswell! Quote Link to comment Share on other sites More sharing options...
dr_broon Posted January 26, 2016 Share Posted January 26, 2016 It does... It looks familiar - ex member? Quote Link to comment Share on other sites More sharing options...
hertsguy Posted January 26, 2016 Author Share Posted January 26, 2016 The pictures make it look for better than it actually is, close up the car has really poor body work. I will be pulling it apart in the next week or two, I bought it off a young lad who had put loads of modifications on it then couldn't afford to insure it as they wanted £350 per month. Quote Link to comment Share on other sites More sharing options...
Krzys Posted January 28, 2016 Share Posted January 28, 2016 The pictures make it look for better than it actually is, close up the car has really poor body work.I will be pulling it apart in the next week or two, I bought it off a young lad who had put loads of modifications on it then couldn't afford to insure it as they wanted £350 per month.Tool! But it's your gain! Quote Link to comment Share on other sites More sharing options...
Grant Posted January 28, 2016 Share Posted January 28, 2016 Missed this one, looks tidy! Quote Link to comment Share on other sites More sharing options...
dr_broon Posted January 28, 2016 Share Posted January 28, 2016 £350 a month?!? Jimminy cricket. Quote Link to comment Share on other sites More sharing options...
hertsguy Posted February 12, 2016 Author Share Posted February 12, 2016 Apologies for going quiet the last few weeks, just been waiting for parts to arrive and working as much as i can. Finally some lovely shiny bits have come, they include : Sheepey ManifoldSkunk pro 1 camsAti pulleyhead gasketgenuine water pump and gates cambeltgenuine oil pumphead boltsstage 5 clutchtitanium Valve, springs, retainers,1000cc injectorsmap sensorTraction baryellow stuff pads all round Next move is to pull the car into the garage and get the engine and box out ready for building it beginning of march. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.