Leaderboard

i used MB6 calipers and Carriers plus the MG ZS V6 discs as stated above. but you need to grind the lip off in the middle of the carrier to fit and its all good

Wheels on I can change the front and back by jacking up the front all on...

lol update time! Krzys you is right mate, had to replace both rear calippers, and one of the ones i bought (both reconditioned calippers) was the wrong one, so took time to go get it exchanged etc. Glad to report though, brakes all replaced now, fluid replaced with dot 5.1 racing fluid, and she's match fit again! Now for the blingy bit! I bought another cam cover from a member on here, and decided to fit it so I could get Rubys original one stripped and prepped for customizing. The one I bought had been done red, so looked decent, although the red was starting to flake off with it lying about the garage. Anyways, hit a big problem when getting the rocker cover off! All the nuts came off easy appart from the one in the corner next to the oil filler cap. This just kept spinning! A call to Rich @civicturbo79 and it was decided that the stud must be fooked! So went to Honda and ordered up a new stud, along with new washers and nice new shiney chrome rocker cover nuts. Got the stud out and cover off with help from @Jim (big thanks mate!) so time to fit her newly finished cover! I spent ages metal polishing it, but decided rather than have the whole cover metal polished like most do, I wanted to have some of her body colour on the cover too. So after much work, here's how she looks now under the bonnet! Also forgot about the vtec solenoid cover and rad bracket I bought a while back, so first pics of them are there to see! The offending stud now replaced with new one Lots of new wee bits from Honda! Cover done Rubys bay! The cover isnt 100% perfect, as the masking tape pulled some paint off! But now I know where I went wrong, I'm doing the same with the spare cover only this time it'll be spot on and with a twist! Hope you like. Deck to do next!

Projector headlights and USDM mods fitted today! Massive thanks to @Chandler for the USDM kit, @dinochips for the projectors and @philgor for the advice on the HID kit! First off a quick action shot! Now for the photos of the job! Don't worry, the bumper is sat on a bit of carpet! Sidelight. Dipped headlight. All fitted, battery went flat though whilst testing, gave me a bloody heart attack when I saw the lights flicker and go out though! All reassembled! Some whoring shots! Look what else has come today!! Right lengths too by the looks of it!

Went to the Prodrive factory today for a Subaru event. The factory is closing and moving to a new building so a last celebration. There were easily 700 Scoobies from all over the country. Main reason for posting though is we got to look in the heritage centre where they keep a selection of race prepped cars, including this Accord touring car

Fantastic

You've got nothing to lose by asking mate!

She looks amazing on those rims mate, perfect drop too. This is gonna be one hell of a project!! looking forward to it!

yh i know mate.. Got a few bills to pay, then Il order pistons, rods, shells and what not.

was flicking through video's ya know and one thing led to another....

i got confused then had to put it down and finish off with another video

ye literally just cut the main pipe and looped it over it looks a lot better with no pump there should have done it while the engine was out but didn't know whether i wanted to keep it or not :/

Just stunning mate!! Transforms the car. B)

If you give good blowjobs you'd get them cheaper

You'd think so wouldn't you?!

Some really nice M's this month, I'll hold off for a better month

I've got a mate who calls them "instant death.... Just add water"

Still has chrome

the mc3, is 4x100, so the cheapest way to upgrade is to strip a mgzs 180 (V6 petrol) of it's front brake's, the disk's are 282's over the 262's you have fitted, also take the suspension and rear roll bar as well as that is a very cheap way to lower it and make it more stable around the bend's.

hehe, the next one is gonna look the same, but with a big difference to the lettering! Forgot to say the spark plug cover is getting sprayed same colour as the car, that's how it looks a bit pants! The cover has been sanded ready for painting Next up will be new sparkplug leads in red, new samco hoses (not sure if they will be red, might clash) then all brackets in the bay prepped and painted or polished. Getting fender washers in anodised red too along with a battery clamp. The slam panel will be getting sprayed too to freshen it up a bit too.

Try try again lol Build thread: http://civic5.com/forum/index.php/topic/6870-mazs-silver-mb2-projectjapfest-pics/

Usually think about taking photo's then realise my hands are filthy and don't want to ruin the phone