Leaderboard

Welcome along. Do you have any sisters

That should come with one bullet, and one of these:

Couple of up to date pictures since ive had the back end sorted. I know the pics wont show the work been done very well but if you can see the back passengers quarter and drivers you will see no dents or anything now and back bumpers all done. Need to get the rest of the black bits colour coded asap.

Next!

I don't think you were obsessive, you finished on the same day. New sig looks

Paid 31 delivered for it but sent it to the body shop hu is owner by a good mate and he is spraying it up and drilling correct holes for me,decided to go down the gloss black look to match new side skirts the wheels and front and rear lip kit

That is a shame mate. Next time stick to running over rabbits. Don't even have to swerve for them they just turn to red mist.

Right! Great weather for wash & wax, so here comes more photos I have also fitted the old modified grill surround which got vandalized a while back, but luckily the grill surround is still usable Then got back home and smashed the bottom tow-eye right in! I couldn't believe how loud it was....

Cheers Kyfer, not much else gonna happen to it for a while now (although have just ordered another tin of plastidip!) Been meaning to say cars looking sweet mate, especially last few photos, see you hardly got any grief on splitter scuffers and that is a achievement with those idiots on there! rover jokes, yeah Ive never heard them before

The Bora is defiantly there now. Looks simply stunning! I will watch and see how well the plasti-dip hold up on your wheels. If all goes well, I will defiantly get the stuff

Wheels look smart, could go lighter I guess but they look good like that.

I bought one of those, had to send it back though as I couldn't hear it over VTEC.

They come with the membership mate. Which is available in the shop tab that you should now have..

If somebody can then I will buy 1 haha

haha! 1 sister, who is nothing like me, hates cars, hates getting her hands dirty LMAO!

They look really smart mate!

I think for that money you definitely wouldn't complain, as above, I'm sure it's possible to make a moulding from GRP or similar.

They look good mate.. Thanks for putting up pics for us , i;m sure somebody will work out a way of making them sit back further soon as well... Every M will end up with these fogs eventually LOL....

It is possible to do without removing other window but i suggest doing it the way Naz suggests.. But this is the other method from my build thread.. Got this today from my mechanic/rover breaker £5.00 Lovely.. A Bit Of A Clean Later So off to work fitting it.... Removed door card and was told by my mechanic it is possible to fit without removing the main window so this is how i did it... Pictures are after removing but make it clearer to see how to Remove Window Winder.. Pic shows clip you need to shift to pull it off You Need A Medium Sized Cross Head Screwdriver Then The Door Handle A Smaller Cross Head Screwdriver And Then Slide To The Left Carefully Here You See How It Was Mounted And The Rear Of The Handle Showing The Clips Undo The Two 10mm Bolts To Release The Centre Bar Pull Back The Rubber Seal At Top To Reveal Hiiden 8mm Nut Now Push Centre Bar All The Way To Bottom Of Door (its tight but it does go) Bottom Of Centre Bar Now push The Weather Strip As Indicated In Pic Or Centre Bar Will Still Be In The Way (be gentle not to break the clips i did not thankfully) Then pull out old broken window and ding it LOL It is awkward to get the new one in requires a bit of fiddling and then pulling the rubber over the inside part of the door but it does go I Would Suggest You Heat The Rubber Seal Of The New Window With A Hair Dryer Before Fitting. (i did not as it was raining and i needed to do it in a hurry so i messed my rubber up visually a little bit but still water tight) Ensure that the centre bar is still on the window inside the door and facing the correct way at the top when fitting new window Then refit window seal at top slide the centre bar back up into place and refit in reverse.. And You Get This Look At The Mess Poor Little Car Twenty Mins Later However Although this method worked and had i used a hairdryer i prob would not of made the inside rubber look untidy if you have time i would remove the main window and then it just slides into place

Yeah I thought it was about time I update it

Yes nikh25 i had a 1000 yamaha and i was told it has too much filling it it so i sold that and bought a 400 vfr race can! lol and i can take the inside out it should be fine but i will find out in couple of months I can weld but havent pur chased a mig kit yet... ...so grinding & a hammer will have to do for now

Such a shame mate. Grates me everyday driving around and avoiding all the potholes. What do we pay taxes for again!?!