noodels
-
Posts
4,657 -
Joined
-
Last visited
-
Days Won
24
Content Type
Store
Calendar
Forums
Gallery
Downloads
Everything posted by noodels
-
Do need to sort out the AFR very weak atm =72 psi pump output.. and could not be tested got all parts now though,fpr,walbro 255,psi gauge and just need to drop tank out to fit pump
-
thanks peeps
-
They do look
-
A winter shot
-
-
£70 inc PP Sizes 10, 11 , 12 , 13 , 14 , 15 , 16 , 17 , 18 , 19 , 20 , 21 , 22 , 24 long reach spannersade by powerhand. http://www.civiclife.net/board/topic/13 ... -spanners/
-
would get hex sockets for sure i have 3/8 drive and 1/2 inch for bigger jobs
-
Civic EG B18 Boosted REBORN UPDATED 28/01/2016 :-)
noodels replied to 10000rpm's topic in Other cars
like the new jdm plate this looks the bizz -
got some challenger snap on autopro had the 36 years and still good older than most off you on here
-
buy the comp car swap engines be better and sell parts like g/box £150-200 dizzy £40-50, shell £80? shafts £60, head ect..think its an easy swap sorry to her that bud
-
ice conditions
-
maybe the dizzy swap one from a mate if poss.they seem to f===k up if stood, i disconect + on battery if stood for periods. filter is next to servo,got to change my fuel pump/filter when warmer, its runing very weak as FPR dyno read tell me but still revs out well. have not done damadge to engine i hope canister fuel filter about £10
-
Mb"s dont have same anchor points as other honda.ITR/EK9 ect. Mb"s Arb fixings mount on the chassis rails at rear
-
damp down sparkplug cap holes
-
could even snap the lug off the lca Note:also the material used for spacer has to be high grade alloy or steel as alloy will soften due to stresses and vibs so will fatigue given time. ps from an ex technician at a well known nofolk car manufactuer
-
ratio comp ect http://cars.homenetcs.co.uk/honda-civic ... ations.htm
-
Home made,did not fit on mine and have no probs,also bolts look very long,any proof of failures http://www.rimmerbros.co.uk/Item--i-GRID003099
-
is there a fuel pump cover there anywhere so i dont have to remove my tank
-
yep eg/dc2 sounds like you have seen it
-
all this talk of steering wheels so i got this one
-
My MB4 Project Thread *Coilovers fitted!!!*
noodels replied to ZchDnn's topic in Honda Civic MA/MB/MC
could get some uprated anti roll bars at good £s -
looks well love my coilovers too,all adjustable and plenty to play with, hours of pleasure lots of deals about atm nearing xmas
-
whats the rates of the springs on these, let the fun begin setting them up
-
hardrace left- crv and another one
-
http://www.ebay.co.uk/sch/i.html?_nkw=a ... ner&crdt=0