skymera
-
Posts
334 -
Joined
-
Last visited
Content Type
Store
Calendar
Forums
Gallery
Downloads
Everything posted by skymera
-
For those interested, this is my brake switch. I'm assuming I need to wind it towards the pedal to push the pin in further to allow more pedal travel before lighting up the rear? Full size: http://i.imgur.com/ZADw2RO.jpg
- 488 replies
-
- 1
-
-
- Honda Civic MB
- Honda Civic 5 door hatch
- (and 5 more)
-
Thanks all, I had my head under the pedal today and I can see the switch. Can't for the life of me figure which way to move the switch. I see the pedal rests on the switch and the more you depress the pedal, the further out the switch "button" comes out. Do I need to move this towards or away from the pedal if it's too sensitive? Also my ABS light has now come on. Mysteriously broke overnight I found this good guide by Dave! http://civic5.com/forum/topic/21-diagnosing-abs-probs-and-other-fault-codes/ And I have error code 15. RR sensor open / short to power. Any usual suspects for this?
-
Thanks for this! I have some days off from work next week where I can take a look
-
It's really absorbent which is why it's always shipped with electrical equipment. I got a big bag from a Dell box couple weeks back Just let it dry out during the day in a warm place. Another trick is to fill a sock with cat litter, knot it and store it in the boot. This never worked for me and just made a mess. I live down south, not far outside of London where everything is daylight robbery. I'm happy with £499, it's my cheapest ever on any car.
-
*blows dust of the thread* The MOT passed without any issues. The replacement boot was just the ticket. I cleared out the underneath of the scuttle panel with a friend. The amount of decaying material was gross. A thick goop blocking the drain. Managed to nip my nimble fingers in and clear it out. Removed the front mud flaps to clear the leaves behind those too. No issues with draining now. I used concentrate screen wash to see if there were any leaks and where exactly water was going. Much easier to track bright blue liquid. Winter's round the corner so I have my trusty bag of silica gel in the centre console to soak up moisture. No steaming up just yet! I have one issue though. I've noticed my brake lights are staying on sometimes when I release the pedal. It seems very sensitive. The slightlest pedal movement will turn the lights on. Is the switch adjustable on these cars? And I'm about to get two more front tyres. I bought Michelin Pilot Exalto PE2 at the beginning of the year and they're almost at the legal limit in just 10,000 miles.... Forgot to add, my insurance renewal is due in two weeks. GoCompare quotes were £1000-1500 which were not financially sane. My Brentacre renewal came in at £800. I gave Greenlight a call and they quoted me just £499. Worth hitting them up if anyone is due a renewal
-
Did you inspect the cat?
-
Another leak. Top of passenger A pillar. Sunroof drains seem okay. I used a funnel and tipped blue screen wash into the channels. No leaking and they drained pretty fast. Windscreen sealant was peeling away so i've replaced it. I'm guessing it's leak from the roof strips. Had the same thing on the drivers' side last year
-
MOT failed last week on a split CV boot. Replaced using the handy boot stretcher tool. MOT restest this Saturday. Everything else flew through! My dash leak has returned with the recent downpours. A sloshing noise in my blower motor under the passenger side of the dash this morning. I suspect the drain under the scuttle is blocked again. Just removed the glove box for easy access to the pollen filter to squeeze my fingers in. Was wet in the blower but not soaked. Any tips on removing the scuttle panel? I remember trying last year and finding it a real struggle to remove the clips. I have some powerful air canisters so hopefully i can get away lifting the panel and blasting the dirt away blocking the drain?
-
MOT booked for tomorrow, fingers crossed. Still enjoying the new exhaust system. Get a decent VTEC crossover at 4.5-5k-ish. Some noise, not much more poke mind you Next on the agenda will be a Blox inlet manifold and a 70mm TB. Possible after that, I'll look into an uprated 4-2-1 as the collector on the stocker seems puny.
- 488 replies
-
- 1
-
-
- Honda Civic MB
- Honda Civic 5 door hatch
- (and 5 more)
-
Old rotten mid pipe and Sebring backbox removed. The backbox is pretty nice and in good nick. I've just purchased a 3 month membership so I'll be putting this up in the classifieds soon. New midpipe fitted with a decat from a friend's EK4. Back box was a PITA to fit as the guy before had literally just cut it straight off. We had to get a little creative. But yes, looks and sounds much better. Volume isn't that loud as there's a B pipe silencer.
- 488 replies
-
- 1
-
-
- Honda Civic MB
- Honda Civic 5 door hatch
- (and 5 more)
-
Had the car looked over by someone for an hour last night. Not a sign of leakage anywhere. Was traced from the reservoir down all the pipes to the slave cylinder. Boot pulled back on the slave and no signs of leakage. Our only theory is the leak is tiny and it's been leaking for a very long time. Anyway, this was a good opportunity to bleed it... I doubt it's ever been done in the lifetime of the car. The fluid came out black! Clutch feels wonderfully smooth and springy. And the horrible judder pulling away in reverse and first has gone. Air in the lines compressing maybe? Also adjusted the handbrake as advised. 1 click on the handbrake now holds better than 7 clicks before!
- 488 replies
-
- 1
-
-
- Honda Civic MB
- Honda Civic 5 door hatch
- (and 5 more)
-
Slave cylinder was bone dry. Followed the pipes and hoses back to the reservoir and all looks okay. Here's some pics of the clutch pedal. Anything look amiss?
-
Slave cylinder was new about 2 years back so hoping it hasn't got a leak inside Hopefully my friend is about to tonight to bleed it for me and I'll keep a close eye on it!
-
Came of the M4 this morning and on the slip road, I pressed the clutch and it felt very spongey. Felt spongey for about another mile before I was able to come off the A404 into a residential area. Lots of play in the pedal. No obvious leaks around the slave cylinder or reservoir. Decided to lift the reservoir cap. Empty. Managed to limp it 2miles to Halfords and picked up some Dot4. I have a leak somewhere.. but where ? Any common areas or hoses to check?
-
Hi All, Quick Q on handbrake adjustment. My handbrake seems to work okay enough to stop itself rolling down a hill but even at 7 clicks it doesn't feel like it's holding well. (checking 7 clicks due to mot coming up) Am I able to simply release the handbrake and tighten the adjuster nut slightly? I've seen a few threads that say to release handbrake, wind the adjuster out, pump the brake, like the handbrake to 1 click then adjust till it drags on the discs. I have no issues with binding rear brakes. Rear calipers were new 1 year back.
-
My driver A pillar used to get wet. I lifted the roof strip and found the underneath had a crack letting moisture in. A semi permanent fix was to clean it up nicely and then squirt clear silicone in and around then squish the roof strip back on. Bone dry a year later.
-
I spent ages looking for a decent shock / spring setup before ending up splashing out on Meister R's. Do not regret it.
-
WDIDT? Saw this. Bought this. http://www.ebay.co.uk/itm/321816879061?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
-
Whoah. WHOAH. This car is AWESOME. Liking the OZ wheels. Big flat faces, reminds me of the AMG wheels you see.
-
Just adding my 0.02, you can buy special lambda bung which reduces the amount of exhaust flow the sensor is exposed to. This reduces the readings and can flick the EML off Example
-
The coilies have definitely helped the handling, but there's still more that needs to be done! And I've just gone onto eBay to buy that Toyosports catback I've seen for the past year or so and it's not there! Plan B, anyone?
-
Voila, she is done! Took a little while to get the car where I like. We ran out of time so it's not perfect. Saw this as well which has me worried slightly! I'll get some better shots today Overall. Very pleased. These coilovers ride extremely well. For those interested, this isn't as low as these go. Far from it. There muist be 2-3 inches of thread left.
- 488 replies
-
- 2
-
-
- Honda Civic MB
- Honda Civic 5 door hatch
- (and 5 more)
-
Thanks guys. Got Friday half day at work so I can get these on. I'm curious as to how these adjust on the car.... The top two locking rings are for the spring preload which I've been told to leave well alone. The bottom locking rings allows you to extend / shorten the shock. (My friend done a quick demo yesterday) Can this be done on the car? I'll go home later and get more acquainted
-
These arrived
- 488 replies
-
- 1
-
-
- Honda Civic MB
- Honda Civic 5 door hatch
- (and 5 more)
-
Thanks to all the guys messaging me about shocks and springs, much appreciated. My MOT expiration date is rocketing towards me so I've had to work on a few things... and a few things yet to work on. So far it's had new discs and pads up front. Stops like a dream. My exhaust is blowing so I need this fixed asap. A Toyosports cat back will do nicely. And my latest investment will be here next week. About damn time I hear you cry!? I know. 18 months. I'm sorry.
- 488 replies
-
- 2
-
-
- Honda Civic MB
- Honda Civic 5 door hatch
- (and 5 more)