Jump to content

Aerodeckcivic

Member
  • Posts

    151
  • Joined

  • Last visited

Everything posted by Aerodeckcivic

  1. So I've got the pipercross viper on and also the spoon replica back box. Exhaust is blowing slightly but still has a nice raspy sound with pops on over run . But the best thing is the sound from the air filter when it's warm and iabs open. Ohhh the noise is awesome!!!! Pure ear porn. When weather is a little better I will make a video and upload with some pictures too. Been offered a 2.25 inch catback system with an outward rolled tip and decat pipe for the massive sum of 50 quid so getting that at the end of the month too.
  2. Cost me about 8quid including the bend and maybe 15/20 mins fitting it tho haha. Made a difference for the time being
  3. Make one? I made a cheap one out of drainpipe for my old aerodeck until I got a chrome one.
  4. Lol love how peeps are thinking my old deck from 3 years ago is yours haha. Just showin da shineeee
  5. I use meguiars gold class wash shampoo. Meg's clay bars as they seem nice and playable with the quick detailer as lube. After that I use g3 paint renovator or meguiars Polish followed by dodo juice's purple haze wax. This is the results I get with that combo. (Old car so excuse the graphics from retarded days) haven't done the new aerodeck yet but will soon hopefully.
  6. He went down to Harry's man and ordered 3x t66 turbos, spoon exhaust systems and NOS
  7. The key to a good finish is in the prep and the way you put the paint down. There are hundreds of video how to's on YouTube. Watch a couple of them and then start. Even write a process list if it helps you get it right I always have one so I get a good process and great finish. Even with rattle cans and doing it on my driveway I've got finishes better than your average bodyshop with all the gear.
  8. I must admit I do like the dc2 front end but the parts are a bit expensive and harder to come by. Might be worth it if the eg front goes well as a possibility for another deck. I've seen some people have done an mg zs front end swap before but I don't like it personally
  9. I would love to do that too but that would be a bit pricey too. Plus the front end of a teggy is shallower
  10. The fabrication and painting is no problem for me. Domain parts are harder to get and come with the cost too. Eg bits are all over and if I c**k it up/ c**k up a panel I can get another cheap
  11. It's sourcing the parts and it not costing a fortune though. I can pick up eg panels all for about 100 quid bonnet,wings bumper and slam panel
  12. Yeah but I think the headlights look too big and bug eyed
  13. That's the honda orthia. That's why I thought eg front as the orthia is basically an ek estate
  14. So I'm sat at work bored and because I cannot photoshop I did this. I'm thinking this could be the new face of my deck at some point this year depending on how the mounting of the panels go. What you all think
  15. Just go careful with those sleeves dude they give shocking handling. I had a set on my old one briefly. And I mean briefly as in a week and then I put mg shocks in with lowering springs
  16. Lightly sets and the drop mark and just give it a quick blow over with the paint before you lacquer them. That way you will have perfect paint but only wet sand it enough to make it invisible ( you may rub through to the primer a little but it will get you that perfect finish). Hope that helps
  17. If you get low dust emitting pads and wax the wheels nicely it's not a problem at all
  18. Will be doing mine whit as it stands out nicely against the blck paintwork and just looks classy in my opinion
  19. Think it's pirates black but I haven't had a chance to clean her up and polish it yet to find out. Hate this bloody crap weather
×
×
  • Create New...