shaun Posted August 13, 2016 Share Posted August 13, 2016 when getting the steering wheel grab the airbag/horn ring with all wires and the 4 screws for ring pink wire and white wire are not needed. green wire is horn . red/yellow wire and red wire are for airbag before staring disconnect battery t30 star key to take airbag off unplug airbag and horn and earth wire make shore steering wheel straight 19 mm socket to undo center nut and take column cover off 3 philips screws then there 3 philp screws holding on airbag/horn ring on honda horn wire is red join to mg green wire airbag honda yellow wire to mg red wire and honda green wire to mg red/yellow wire do not solder with airbag plugged in as the heat can set it off put mg airbag ring on column screw 4 philips in. plug wire in. put column cover back on. put steering wheel on. plug airbag and horn in all in and working and srs airbag light is off but dont no if it will work in a crash and i'm not gonna crash it to test that part this is a guide so you will bee doing this at your own risk 4 Quote Link to comment Share on other sites More sharing options...
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.