MC2wo Posted August 25, 2021 Share Posted August 25, 2021 Does anybody know if you can fit the mg zs 180 rear arb to civic mc1 (non VTI aerodeck)? i woud have thoughtso, but id noticed that they dont come with the rear subframe brace or front strut brace, and the mounting points arent there to even fit one? Quote Link to comment Share on other sites More sharing options...
dr_broon Posted August 25, 2021 Share Posted August 25, 2021 I would have thought so as well, but don't know for certain. I've got a feeling that Rob @kyekye09 had an mc1 and had an arb if you can find his project thread. Going back some time there mind. Maybe @Dave can remember. Actually, Dave, does DD have one? 1 Quote Link to comment Share on other sites More sharing options...
KiNK43 Posted August 26, 2021 Share Posted August 26, 2021 I think the bolt holes are there on the chassis legs. But maybe not on the control arm. I have two spare mb6 18mm arbs if you need one and a set of control arms( however the bushes have seen better days) 2 Quote Link to comment Share on other sites More sharing options...
Dave Posted August 27, 2021 Share Posted August 27, 2021 @dr_broon @MC2woNo, only the vti/VTiS aerodeck/5 door hatch got the rear arb. None on DD sadly. On the plus point, 2 less drop links to go wonky and need replaced lol 1 Quote Link to comment Share on other sites More sharing options...
KiNK43 Posted August 27, 2021 Share Posted August 27, 2021 On 8/27/2021 at 4:37 PM, Dave said: @dr_broon @MC2woNo, only the vti/VTiS aerodeck/5 door hatch got the rear arb. None on DD sadly. On the plus point, 2 less drop links to go wonky and need replaced lol Expand Even the vti deck didn't have one. Just the fastback had rear arb for some reason. 1 Quote Link to comment Share on other sites More sharing options...
MC2wo Posted August 28, 2021 Author Share Posted August 28, 2021 Yeah its weird that, I can understand the vtis getting them and not the non vtis, but I can't see why the areodeck vti didn't get one. That's baffling lol 1 Quote Link to comment Share on other sites More sharing options...
dr_broon Posted August 28, 2021 Share Posted August 28, 2021 Ah, I thought that even the non vti hatch had one but smaller... That explains why it won't fit the non vti deck then. 1 Quote Link to comment Share on other sites More sharing options...
SaTaNeAtChEeSe Posted November 7, 2021 Share Posted November 7, 2021 Funny that, been meaning to look into getting a rear arb for my Aerodeck VTi as I would like one. So, is it just the rear arms missing the mounting points then? Quote Link to comment Share on other sites More sharing options...
KiNK43 Posted November 7, 2021 Share Posted November 7, 2021 On 11/7/2021 at 1:09 AM, SaTaNeAtChEeSe said: Funny that, been meaning to look into getting a rear arb for my Aerodeck VTi as I would like one. So, is it just the rear arms missing the mounting points then? Expand There will be bolt holes on the chassis legs for the brackets. May need to run a Tap through them. But you will need to swap the lower control arm for one with ARB holes. Or just Use aftermarket control arms. The machined aluminium type ones. Quote Link to comment Share on other sites More sharing options...
dr_broon Posted November 7, 2021 Share Posted November 7, 2021 If it's a vti deck the arms will be okay? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.