Roj Posted August 30, 2014 Author Share Posted August 30, 2014 So after months of waiting, I finally got my hands on a full VTiS kit in Sicilian Red. The skirt has a few scuffs, but nothing some touch up paint shouldn't fix. Already looking better. Other side done! The moment I tried on the VTiS front splitter, I just fell in love with how aggressive the front end of the MB6 looked. The front lip had the usual scuffs and chips, but it also had this cut out of it. The previous car it was on ran a cold air feed so the lip was cut around the funnel. I'm going to cover it with black tape and then just actually fix it later down the line. Really needs lows now. Ooooft. I do have a rear lip to go on, but one of my mudflaps is being a b****r and wont come off. I've soaked the offending screws in WD40, so hopefully that works. 3 Quote Link to comment Share on other sites More sharing options...
Shafzzz Posted August 30, 2014 Share Posted August 30, 2014 Verr cool verr swag much snyper I like it. Quote Link to comment Share on other sites More sharing options...
Jayhoath83 Posted August 30, 2014 Share Posted August 30, 2014 Very nice dude Quote Link to comment Share on other sites More sharing options...
h4mza Posted August 30, 2014 Share Posted August 30, 2014 I normally pour hot boiled water over the rusted and tight bolts to losen them. Works most of the time Quote Link to comment Share on other sites More sharing options...
Roj Posted August 30, 2014 Author Share Posted August 30, 2014 I normally pour hot boiled water over the rusted and tight bolts to losen them. Works most of the time I'll try that tomorrow if the WD40 didn't work. Cheers dude. Quote Link to comment Share on other sites More sharing options...
vtec2011 Posted August 30, 2014 Share Posted August 30, 2014 Looking like a proper beast now! Loving it mate and yes, get her on the floor! Quote Link to comment Share on other sites More sharing options...
Roj Posted August 31, 2014 Author Share Posted August 31, 2014 Looking like a proper beast now! Loving it mate and yes, get her on the floor! Not on the floor, maybe just 35/40mm lower? Cool. Get a cold air feed too!! Well I do actually have the bumper off the other car, with the cold air funnel still attached. I was thinking of using it for when I go Santa Pod or trackdays, where I can use my long arm intake without worrying about water. Quote Link to comment Share on other sites More sharing options...
Roj Posted August 31, 2014 Author Share Posted August 31, 2014 Round 2 with the mudflap of horror! The result? Yeah you sit there and think about what you've done. So with that out of the way, here's the final piece of the puzzle fitted nice and squarely. Top picture was taken after I stuck the top edge of the lip down. So it's not sagging anymore. Always had people asking why my exhaust sat so far out of the bumper. This is why, so it fits perfectly under the lip. And a couple of complete shots just to complete my weekend of productivity. Quote Link to comment Share on other sites More sharing options...
powerofdreams Posted August 31, 2014 Share Posted August 31, 2014 Looking really gd mate. Love the aggressive look the vtis gives . Quote Link to comment Share on other sites More sharing options...
powerofdreams Posted August 31, 2014 Share Posted August 31, 2014 Totally transforms the front of the car Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.