Leaderboard

New update Gibs36 has done this for me and will be with me tonight will post a pic when its all fitted another update ive sold my teg spoiler to Gibs36 and picked up a ATR spoiler really cheap,ive gone for accord spoiler as direct bolt on

Calm Down, Calm Down

Credit goes to MikeyVTi for these - Fit on the OEM bracket!

Phew somebody bringing it back to the subject in hand....

Yes she and all the others have me very well trained.. On another note Guys We deserve to give ourselves a pat on the back for ???? SPAMMING UP GRANTS THREAD !!!!!

Dey don't do dat down dere doh do day doh, eh eh eh

yess phewwwww i did went to the delivery office and told them what went wrong with the post code and they told me the same that post code doesnt matter if the address is right now ill try to fit them and see how it looks at night

maybe, behind the rear door handles you could put some of that smart water, its pricey at £35 on ebay but you never know, most would be car thieves are already known to the bacon, protecting yourself with a small webcam and some UV or smart water gives the rozzers something to get their teeth into. Also popping a sticker in your window or car stating its covered by CCTV is a good way to ward off would be thieves.

Speaking of lists, check this thread out, bought my VTi-S in December just gone as well and the list I've gone through was quite large! http://civic5.com/forum/index.php?/topic/7938-2014-your-civic/page-3

Yes it takes a small layer of laquer off. You should leave Atleast 50 microns of paint left on the paintwork otherwise your paintwork is at higher risk from flaking etc. you'll need a paint thickness gauge to test it. I machine polish with a very fine polish to get nice result as my paintwork doesn't normally suffer from swirls etc just general small scratches which is taken out by the fine polish I use

Strong stuff then... I shall prepare for it then! UPDATE! The MG ZS spoiler has been resprayed and fitted! I am over the moon with it. It looks so right!!! As for lowering, I didn't get it done today because I couldn't pick up the springs earlier today. But in the next hour I am picking them up!

Thanks Mike Freemantle it wasn't that hard lol,i have a photo shop app in my head lol took me from boxing day to 30 of January to do this to

I like that fittment lol

Ha Ha Ha now thats funny.And awesome in one hit.....

Congrats dude *gritted teeth* Really though It'll look well, and I wouldn't have left them black either if I'd been able to get them. Saying that, I hope your car falls apart on the way there, like a clown car at the circus.

I blame uk gold.

Thes def do not taste of strawberry Fly Agaric...

My car has underseat subwoofers as standard, but they're powered by the headunit. The Alpine upgrade consists of a 4 channel amplifier and front speakers and tweeters and the amplifier will then amp the front speakers and the underseat subwoofers for more punch!

Awesome! Yeah you'd think that, but then you buy a 5/10 year old car with it fitted and find you can't replace the tape deck!

I like to oil my big spanner and put it in the tool box. Just to keep it safe n that

Well what ya messing about at then get to it. Or at least silicone it on for bling..Edited cus I decided to read after I post instead of before.. clever! Which bolts stuck tom?? Drillable?? I had to do one of mine was not too bad a job. Not great either mind.

haha It made me laugh so it's not so bad! Cheers, started new job lastweek, first pay is the end of a working month so a few weeks away I'll be spending £300 odd to get started! Going to just get lowering springs to get it low, before coilovers as I still need to figure everything out in that department!

Congratulations Hubert!!! Well deserved!

Well we have a winer so well done Hubert for his mc2 his mighty deck

The Beemer looks much better with the new taillights fitted Shafz. Now post the pictures up so everyone else can see.

ha ha mixture between the 2....

yeshh chek out the project thread

Had to go right back up the page to figure out what the chuffing heck you were going on about.

spoiler looks AWESOME!!!!

I probably machined polish mine once maybe twice a year it only needs a full one that many times as long as you keep on top of it I haven't clayed it for a year and a half Will be changing the rubbers tomorrow It's finally stopped raining so will try the QD shortly hopefully

So it doesn't. I'll sort that later, cheers.

Huzzah!! It needed some. Now about mine...

Well done. A worthy winner this month

I can watch MASH over and over again and still laugh at the jokes! Brilliant writers!

Or the moustache, nobody does them like the scousers.

LOL well i for one have never seen or heard of it mate, so i think were all safe down these ways for now And were here all week And i do mean all week And all bloody day long 24/7 come rain or shine Well Be There....

Agreed!

yes but don't have s**gbook, not allowed in the house, poisons the loin's

I'm pretty much the same, if it smells good and it's easy to work with then it's a winner. As Alex says some shampoos strip wax so they're best to avoid, I use Collinite wax which should last 6 months and as I try and give it a wash every couple of weeks I always finish with the Dodo Juice QD which smells awesome and tops the wax up leaving a great shine. I find if you do a full detail (rinse, foam, rinse, wash, detar, rinse, clay, wash, rinse, dry, polish, wax) two or three times a year then just a quick wash and QD every few weeks keeps it looking good.

I've nearly ran out of dodo juice I'm hoping the auto finesse stuff is good and it smells nice otherwise I'm not going to like it ha ha. Will try and let you know a Verdict on it today once I get up and if it has stopped raining

Thanks Stephen baker

Good tyre choice btw. There super sticky for road tyres! Nice brace too. Mmmm

THIS IS AN ODDESY WHICH HAS 1029BHP

Congratulations dude, beautiful car.

I wouldn't even bother mate. That looks really good and you'll never see those little spots once fitted

It is raining, we shall stay at 'ome drink wine and eat cheese. (*said in a corny french accent)

This: http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_185799_langId_-1_categoryId_165527 with some steel wool and a massive tub of elbow grease.

New foggy fitted today, much happiness, thanks once again Jonnyricer, you're a star check out Jon's B18 into EG civ thread @: viewtopic.php?f=82&t=7572 Random photo: 1"£££$££"!!