Jump to content

DAVEMB2

Administrators
  • Posts

    3,727
  • Joined

  • Last visited

  • Days Won

    6

Everything posted by DAVEMB2

  1. Looking nice Simon I have to get trinityD clean now she needs it @dr_broon
  2. Yes atr will not go on without hub it's only the dc2 wheel that drops on with no prod
  3. Looks smart jake like them
  4. Like. Jake like said more mods than I have done in months
  5. Yes the tps can give a few prods with it like hunting from start up especially if you have left the car standing for a few days or been away on holiday . Sometime when you trying to crawl in traffic but when warmed up and car as been driving not so much . And having a scooby . . not so sure on backfire myself I like my gasses to come straight out and away not pop and bang to get out @Krzys @Dave
  6. @burbleboy@KiNK43@Dave@Grant Nice one all I have carbon synchro's fitted in trinityD :)
  7. Nice one knew once she was done you would get back in to K heaven . So do you no who did the gear box then :wink: :wink: @Dave
  8. Nice good work but its going to be from you jake .
  9. Bring back the vti Yer the 3rd gear and box are a bit of a prob on the fn . Hope she all good when they have finished with her
  10. All this said what about veetec got to get it changed on the airbrushing but then again . And the M in the house was hit by an EP that's what pushed it there lol
  11. DAVEMB2

    K24 EP3

    That's what it's like hell I started off just doing a B18 into my MB (1.4) then a h22 then a k20 in the end I did not get one off them fitted
  12. Nice jake and get a fair few mods done :)
  13. Nice one phil she looks sweeeeeeeeet :) and like the winglets @phill1975
  14. They not buttons they are the little lights that glow when your dash lights up and the other set is when you push the button in for the litte light to say its on think brown to light up when dash is on and blue to light the button to say its on @jaydlaw
  15. DAVEMB2

    K24 EP3

    O the cost just goes up i know the good thing you have is that it fits and have no probs with the rest of the bits coz it's going in the ep I had to custom build and rejig to fit it into an MB2 and had to do brakes and every other bit on the M had to be rebuilt
  16. DAVEMB2

    K24 EP3

    Are now I was saying 230/245bhp as a good standard set up you are not going standard are you hi com pistons ported RBC and so on , you will like it when done coz like me you should be able to get. Around 40 mpg and yes 300bhp is poss or close anyway I would say 270/310 bhp @beastgtir
  17. God the filter must of been poorly made I mean how much was you sucking in . I was using my old cone filter of my 1.4 engine on trinityD hitting 290 bhp had no prob with that
  18. Nice work good you can get it in and up in the air so much better:) God I hope funky power are not going there are some bits I want off them and they have always been good
  19. DAVEMB2

    K24 EP3

    Mmm k24 nice yep you will need a k20 oil pump , and they can run over 8000rpm if need be ,my k26 can rev too 8200rpm and I would think a good set up you should see anywhere around 230/245bhp @beastgtir@Krzys@Grant@philgor@UnicyclingTom
  20. Nice one jake yerrrrrrrrrr back to the Ms my M will have to visit your M :)
×
×
  • Create New...