james

Out with the old Gaps checked and some copper greeas on the threads ........ (CAUSE OCD ) And in with the new ( when seated 2/3 a turn is tight enough ) Not the best fit but they are not oe Its so nice to be able to finaly give full open throttle at low rpm with out To Do List: [*:28qa03pe]Fuel Filter [*:28qa03pe]Gear Shift Upper & Lower Boots [*:28qa03pe]Clean Throttle Body [*:28qa03pe]Sort Out More Lumbar Support [*:28qa03pe]Get Exhaust Leak Fixed [*:28qa03pe]Front Brake Pads [*:28qa03pe]Polish & Wax [*:28qa03pe]Valve cover gasket I think i will tackle the throttle Body next i will have to remove the inlet manifold and throttle body to do a full job on it

Finaly, no more jerking To Do List: [*:jqtf0n7n]Fuel Filter [*:jqtf0n7n]Gear Shift Upper & Lower Boots [*:jqtf0n7n]Clean Throttle Body [*:jqtf0n7n]Sort Out More Lumbar Support [*:jqtf0n7n]Get Exhaust Leak Fixed [*:jqtf0n7n]Front Brake Pads [*:jqtf0n7n]Polish & Wax [*:jqtf0n7n]Valve cover gasket

So i just knocked something off the list now something new I need a new valve cover gasket To Do List: [*:3ajct4x2]Spark Plug Leads [*:3ajct4x2]Spark Plugs [*:3ajct4x2]Fuel Filter [*:3ajct4x2]Gear Shift Upper & Lower Boots [*:3ajct4x2]Clean Throttle Body [*:3ajct4x2]Sort Out More Lumbar Support [*:3ajct4x2]Get Exhaust Leak Fixed [*:3ajct4x2]Front Brake Pads [*:3ajct4x2]Polish & Wax [*:3ajct4x2]Valve cover gasket

Finaly connected the horn button, some macgyver required God dam its annoying having the engine missing and farting c,mon the ht leads & plugs i also ordered red rubber grease for lubricating the brake sliders To Do List: [*:2vuculrz]Spark Plug Leads [*:2vuculrz]Spark Plugs [*:2vuculrz]Fuel Filter [*:2vuculrz]Gear Shift Upper & Lower Boots [*:2vuculrz]Clean Throttle Body [*:2vuculrz]Sort Out More Lumbar Support [*:2vuculrz]Get Exhaust Leak Fixed [*:2vuculrz]Front Brake Pads [*:2vuculrz]Polish & Wax

14-Sep-2012 - 11:00pm

Theres always something to do

Just ordered some ht leads and ngk plugs

to do list: [*:2ju04x1q]spark plug leads [*:2ju04x1q]spark plugs [*:2ju04x1q]fuel filter [*:2ju04x1q]Gear shift upper & lower boots [*:2ju04x1q]clean throttle body [*:2ju04x1q]connect horn button [*:2ju04x1q]sort out more lumbar support [*:2ju04x1q]get exhaust leak fixed [*:2ju04x1q]front brake pads (ebc green stuff) [*:2ju04x1q]polish & wax [*:2ju04x1q]adjust timing to 14 degrees

Iron-x got it a bargin - could'nt say no Thanks i like the wheel ALOT!!, the more i use it the more i like the chunkiness... like a kit kat chunky or a yorkie

i could have but at $200 minus delivery from the us ........ (works bell boss kit)

that it dose you need to test drive one

In the Post Came E20 + delivery for the lot And i fit the new momo suede drift steering wheel aswell taday I picked it up yesterday at japfest (ireland) and got a boss aswell Problem is the boss was for the none airbag models so the down side is i have to turn off the indicators manually and i still have to find out how to connect up the horn button so this wheel is good not everything i wanted as i would have prefered a smaller diameter its either 350/330 mm i dont know i think a 300 mm in a dish would feel best, i like thing heavy i feel more envolved that way It looks the dogs balls and i might sell it in the future and get what i totally want, the feel is good chunky but minimal cushioning its gripy with the suede but the horn and fixing ring feel as cheap as the plastic cheap stuff is wraped in to do list: [*:2sweb2ry]spark plug leads [*:2sweb2ry]spark plugs [*:2sweb2ry]fuel filter [*:2sweb2ry]Gear shift upper & lower boots [*:2sweb2ry]clean throttle body [*:2sweb2ry]connect horn button [*:2sweb2ry]sort out more lumbar support [*:2sweb2ry]get exhaust leak fixed [*:2sweb2ry]front brake pads (ebc green stuff) [*:2sweb2ry]polish & wax

my first drift and picked up a nice deep dished omp steering wheel and boss at japfest today Pix L8R

Yep thats right big difference now in the foot brake and hand brake very happy with the put come, this car STOPS the brake are not big but the stoping power is way better than my old mb6 i was going to clean the throttle body but it turns out not any old carb cleaner can be used there is a coating on the butter fly that if removed will effect the idle so it has to be throttle body cleaner as its less aggressive looking forward to this job as it it dirty black in there

Today i will be inspecting the rear brakes and cleaning the throttle body

It is that Yesterday i changed the gearbox, diff and gear shift turret oil the gear shift upper and lower boots will need replacing my diy tools for sucking and soaking up the turret oil And finally the dirty old crap NOT GOOD AT ALL Diff oil gearbox oil next on the to do list is: [*:17lodbvg]spark plug leads [*:17lodbvg]spark plugs [*:17lodbvg]fuel filter [*:17lodbvg]Gear shift upper & lower boots

i went to main dealer and got ****ed in the azz when buying them robbing *****

yea i like the night shots myself, the walls closing in on the sky

well not everyone likes bucket seats and at the price (seat + brackets) im not bothered na im not lowering it

Went to halfords last week for the castrol special offer E20 4 liters so today was to be the day i changed the oil and filter as the oil in the car is black crap close enough is best and some pictures of the newly fitted bucket seat space was well .. limited some art

SH!T thats tidy.com

Well the brackets arrived today and after five hours they ware fitted pix tommrow

but more ricy

hhhmmmm will it fit my mx5 ?

a C5 first