Jump to content

kenny_tmt

Member
 View Profile  See their activity

  • Posts

    154

  • Joined

  • Last visited

 Content Type 

Everything posted by kenny_tmt

  1. kenny_tmt
    Looks verry good!
  2. kenny_tmt
    Hi guys, there are some updates coming up in the near future I hope to have it all done before the end of june. New IM: Edelbrock Performer X and portmatched TB New cams: jdm itr spec 98 cams + upgrade of the valvetrain. We are going to see what power we can get out of the b18c4 with the stock compression rate.. If the results arn't good then the compression will have to be raised. Grtz
  3. kenny_tmt
    The mapping only took about 3h. Grtz
  4. kenny_tmt
    I even don't know any brand that makes hardware/software to tune OBD2 ecu's
  5. kenny_tmt
    I like your front strutbar! Nice car man!
  6. kenny_tmt
    Obd1 is just way easier to tune..
  7. kenny_tmt
    http://hondata.com/s300.html All the information you need. Cheers!
  8. kenny_tmt
    Hi guys, I went yesterday back on the dyno but the result wasn't so good as the last one. 192bhp and 178nm torque (which is still verrry good), the runs where done without anny tuning so just the new catback and OEM itr back box and hup on the dyno also the gasoline was ron 98, not 100 as the last time. The dyno was done on different rollers(there was a dynomeet so you could go cheap on the rollers). I hope to get a new finetune on ron 98 next week because ron 100 is just to expensive! Here is a little movie and pictures Some new pics: bN6-C-Rtjyo
  9. kenny_tmt
    Hondata S300, and you can activate this features without burning a chip...
  10. kenny_tmt
    I've never tried this Noodles, I think it will have a huge flat spot with the p9k in mid range section. I will get you guys know the result of the dyno asap. grtz
  11. kenny_tmt
    Looking nice your mb!
  12. kenny_tmt
    Not long to wait then
  13. kenny_tmt
    12the may!
  14. kenny_tmt
    So, because the aerodeck go's back on the dyno saturday I went to my local 2nd hand oem parts dealer and bought an integra muffler. A little grinding and welding job had to be done to get a nice fit! I'm verry happy with the sound, it is really quiet and I dont notice any kind of restriction when I go flat out . I'm verry curious about the dyno now picture:
  15. kenny_tmt
    looking good mate!
  16. kenny_tmt
    Thx you guys!
  17. kenny_tmt
    Thank you guys!
  18. kenny_tmt
    I welded a new exhaust line this weekend because the old one had a little bottleneck at the rear muffler and I also added an extra muffler in the mid-pipe. I'm thinking to go with a OEM itr rear muffler because with the twinloop it's almost impossible to install a rear swaybar. The 12may she go's back on the dyno! Pictures: Perfect fit:
  19. kenny_tmt
    Verry nice mb6! How is the KW ?
  20. kenny_tmt
    This is the best picture i have from my mc2
  21. kenny_tmt
    If you look good at the 2nd picture you see a CTR
  22. kenny_tmt
    Get your mods on the engine, buy a hondata, put some methanol into your fuel, get a good tune and she will make a lot more power!
  23. kenny_tmt
    Nice wheels, much better then before!
  24. kenny_tmt
    Just Like the title says is there any possibility to put a rear and front sway bar on a mc2 ? grtz
  25. kenny_tmt
    Verry clean aerodeck! Looks verry good!
×
×
  • Create New...