KiNK43 Posted April 19, 2020 Share Posted April 19, 2020 (edited) I've had a look Dave. That's exactly what I need. Me and my brother were trying to make something similar with an Arduino but gave up. So glad you've put me onto this. Thanks. In fact I could have not Installed gauges. Just ran this instead. OEM look and all that Edited April 19, 2020 by KiNK43 1 Quote Link to comment Share on other sites More sharing options...
Dave Posted April 19, 2020 Share Posted April 19, 2020 I've sourced the English version of the installation manual (was in the middle of translating it from Polish to English then though ah ta hell with this, there must be an English version somewhere! lol) Doesn't look to bad to wire up to be honest, pretty straight forward so going to be ordering up all the neccessary rolls of cable I'm gonna need. Going to take a while as stuff ain't arriving quick and will need to take DD off the road to do it all but will be sweet once done! 1 Quote Link to comment Share on other sites More sharing options...
dr_broon Posted April 19, 2020 Share Posted April 19, 2020 Will be cool. I remember when Mike did his, and you're right, it did bring it up to date. I had to take my clock out and used the space to fit my phone holder. The clock was always going of sync with the one on my radio and my ocd couldn't cope. 1 Quote Link to comment Share on other sites More sharing options...
Dave Posted April 19, 2020 Share Posted April 19, 2020 2 minutes ago, dr_broon said: Will be cool. I remember when Mike did his, and you're right, it did bring it up to date. I had to take my clock out and used the space to fit my phone holder. The clock was always going of sync with the one on my radio and my ocd couldn't cope. Haha! know that feeling!! They must change minutes at precisely the same time or it will cause you to crash! Least that's how my ocd see's it! lol Going to do a how to guide on this too so be easy for any members to do the same 1 Quote Link to comment Share on other sites More sharing options...
KiNK43 Posted April 19, 2020 Share Posted April 19, 2020 Haha funny you should mention that as I gave my lad the task of waiting for the radio to change minute and pressing the clock minute button at exactly the same time when we went out for a blast earlier. Lol. 2 Quote Link to comment Share on other sites More sharing options...
Dave Posted April 25, 2020 Share Posted April 25, 2020 Update: Started to refurb her Cades alloys (DD's posh shoes) The rimes being polished were in a terrible state tbh, and I accidentally kerbed one a while back. Glad to hear that all 4 have now been sanded, repaired, prepped and the the first one is now into paint. So far had 2 coats of etch primer, two coats of high build primer and now onto the silver (1 coat so far). Was going to make a video on this, but because we were in the middle of moving house all my camera gear is packed away including tripods etc so can't. Will however get photos up asap! 1 Quote Link to comment Share on other sites More sharing options...
Dave Posted April 25, 2020 Share Posted April 25, 2020 So, some photos. This was after 2and coat of silver (now just finished 3rd coat) And one of the other wheels, sanded, wet n dried and waiting for paint. Quote Link to comment Share on other sites More sharing options...
Dave Posted April 25, 2020 Share Posted April 25, 2020 Finished! Masking tape etc off (and not a single bit of paint/overspray on the tyre!) Have defo learned that proper automotive masking tape is key, and makes an amazing difference. Wheel has had 4 coats of laquer, no runs anywhere so haven't lost my spraying skills! Will get another done tomorrow then the other two on Monday. 1 Quote Link to comment Share on other sites More sharing options...
dr_broon Posted April 26, 2020 Share Posted April 26, 2020 Good job there mate. Think that I prefer them like that 1 Quote Link to comment Share on other sites More sharing options...
Dave Posted April 26, 2020 Share Posted April 26, 2020 Jury is still out for me on that Simon lol. I love wheels that are dished with a polished lip, but just fed up of the hassle trying to stop them corroding/crap getting under the lacquer so this seems the best alternative. I do however have another cunning plan but that's way further down the line! Involves spectrachrome paint! Really happy with the finish on these though, they do look like new again. Time will tell on the durablity as I've found with Halfords paint it gets buggered very easy by brake dust, Halfords lacquer really is piss poor. Hence all the paint and lacquer this time are proper automotive stuff. Cost more, but hoping it actually lasts! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.