Leaderboard

Ok i guess its time to put a build thread together sadly there are no surviving pictures of the start of the story but ill fill in as best as i can about 2 years ago after a friend convinced me to buy a VTi-S sadly that car had to be commited to the scrapyard in the sky after a little crump (cough.... too fast on a wet road....cough.... lesson learned) and for the life of me i cant remember where i saved the pictures of it >< . however in order to save as much of it as possible we found a rolling shell that was for sale for £250 and a mate of mine kindly went and picked it up and took it back to his workshop. i got really lucky with the shell as it had the full leather interior most of the interior trim carbon wrapped already, Koni shocks and springs and a 2.5" Mongoose catback hanging from the underside! (apparently the guy selling the car couldnt get the exhaust off the car so he left it there O.o ) in the next stage sadly i was stuck about 200 miles away from the car and wasnt able to work on it myself and as a result i could never have done it without some help from 2 really good mates in Inverness, Jamie Love and Sean Mackintosh who stripped the vti-s and dropped the engine and electrics into the new shell. the next time i saw the car they told me that scicilian bonnet was a bit tatty so they had put the pirate black bonnet on, i wasnt so sure about it untill i saw it and realised they had also put the vti-s kit and the black spoiler on it and i loved the colour combination! so here it is, as it was back then just after it was finnished and just a little over a year ago sitting on the koni suspension so the next thing to be done was coilovers. i decided to go all the way and so far its the only really expensive bit ive bought for the car.... MeisterR's! and boy did i make the right decision, totaly transformed the way it goes round corners and still the best thing I've done to the car so far. next thing to get done was intake and a mate sold me his AEM short arm really cheap so that was and easy choice on it goes! next thing to happen was that some stupid bint drove into the back of me and the insurance w****rs wrote off the civic..... however as luck would have it they didnt see any salvage value in the car so they gave it back to me with a payout of what they saw the value of the car as and 12quid later i had a new rear bumper from a breakers yard complete with a 1.4i badge on the back of it still not sure if ill be leaving it there or not but its kinda fun for now when aresholes in audi's think its a 1.4 And that was all for a while, untill the start of this year when i had the time to take a week and give it some love. i started with a basic service as it hadn't been done for a while. so pluggs oil change dizzy cap and rotor arm (dizzy cap was cracked and probably the origonal one) this was all fine untill i was taking the dizzy cap off and the casing on the Dizzy broke off around the bolt so that was an hour spent swapping the guts of my dizzy into the casing from a b****red dizzy that my mate had in the back of his shed next on the list was the front wishbones as this was starting to get a bit worrying (and i hadn't wanted to drop the coilovers down properly untill this was sorted) Before so new wishbones went on and the coilovers were wound down to about a 20mm drop (still fiddling with them so this is defiantly not going to be the final height) After while i was there and it was good weather i decided to tackle the carpeting in the boot that had been p**sing me off as it was constantly falling off and getting in the way so.... Weight Reduction! and finnaly for this bout of work i picked up a new shiny thing from Unit6 spares in perth on my way home DC2 Strut brace! Anyway.... thats all for now, hope you enjoy and ill be adding more to the build as time goes on (probably fairly slow progress though as its my daily driver and I'm a broke student lol) To Do list: 1. Poly bushes for the rear LCA's ive got and get them fit. ------------------------------------------- Ordered! 2. Find and Fix the source of the knocking thats comming from the front suspension --------- Tracking done which eliminated all 3 of these 3. Fix Fog lights and get surrounds for them 4. Fix healdight washers 5. Strip and refurb breaks 6. Better Tires 7. Dechrome grill/rear plate holder and headlights 8. Paint Rocker Cover 9. book it into a body shop to get everything tidied up and get all the panels/bumpers lined up properly 10. (distant future....... PlastiDip!) Very distant future...... 1. Exhaust manifold 2. Inlet manifold 3. Full Bracing 4. S80 4.7 gearbox 5. Wheels (undecided what yet)

Look well on the new wheels dude. You're only 23 though?!?! From your avatar I always thought you were Ricky Wilson from the Kaiser Chiefs

It's really not. Like four weekends. Holy shit!! I have LOADS to do.

ye tomorrow never comes but i do ok, either friday or saturday i'll upload a picture

^^^ You & JD:

I've asked for one and said he has free reign on what to do include! I may regret this

Got back from a 20 mile drive aaand my wheels are no longer white... So, now I'm not sure if I want to do the multi-spokes in white. I'm thinking of Tom's idea. Satin bronze

Friday Friday Friday !!!!

There really good price delivered.. i wouldn't have bothered otherwise. Arrived within a week with special grease too. No squeaks yet. They did c**k up my front arb bushes tho. Sent wrong size. Was cool cus My mate reemed them out on a pillar drill and about lost his fingers. Filmed it as well cus it was all a bit sketchy.

I won't get to excited, you're all empty promises.

Yes, yes, yes!!! Brilliant mate, it does look a little lower on the rear but at least she's down and that arch gaps been reduced, see how you get on. :D

Oh well, that's fair enough then.

I managed to get the car on the ramp today and she's finally got her a$$ down! But I'm not too happy how she sits on the rear. Sitting a tad too low and these are with the rear standard EG springs! The Beaks bar is hitting every speed bump and I have to be so careful going down the very bumpy lane to my house. Tell you what though it is so so much fun to drive now! In-fact, I am over the moon with it. I cannot stop looking at my car Picture has to be taken just as I reversed out of the garage...

Looking good nick very nice :)

I'm pretty sure I got some smaller ones here and need the bigger ones so if you need smaller ones we could swap but will check the ones here are bigger ones first

I'm worried that once I take the MB3's bumper off, it'll never go back on. It's mostly zip-tied in place on that corner now, most of the bolts and screws are missing.

It's no secret, you're helping me out with it

Perfect thanks mate

Love the sound of your mb mate

I know the question wasnt directed at me... But thats a tough one ... Burble Vs looks ...

On another note, the fans seem to be a lot more powerful without all the gubbins slowing the air down

Yeah no probs it will just be sat in the shed.

Think he on about the bit that goes into the catch on seat

Yeah its not Adam mate .. Craig something or other, i PM'd him this morning .. Car looks good mate .. Like the two tone ..

Thanks man, yeah the lights will be a welcome upgrade haha my golf had Angel eyes and CSL (rep) wheels but my BMW has neither, time to change that.. And dw man maybe next time! Yeah it's all in the cabin and the best bit is it all looks standard so people wonder what you've done to it!

Yeah worth a punt dude! Grant is checking with another guy who's selling leather seats on the Facebook group! I'm not on it so he's playing messenger boy

Just attacked the rest of the system. Battery and tray out to disconnect the rest of the pipes and whip them out (and strut brace off to get pipes out of the way), then glove box out to take the evaporater out and change the pollen filter at the same time. Another 3kg to add to the list. Now all that's left is the dryer bit that's near the screen wash bottle, coz i think the bumper had to come off to get t to it?

About time you did the front end to match the rear!

I will have a new one if your offering lol free range like kryz lol

yeh i just ment that the ARB was a bit ambiguous in the diagram so it would be best to check with them which one it is exactly before you order anything

That's interesting! I know it's said they give better low-mid range, suppose it makes sense though! Must be why the Type R's still have that set up from factory!

Look a little bit like Chrono's! Nice!

He thinks you're transexual!

Loved that video mate. . She goes really well for a 1.5..I would say white wheels definitely for your car mate. . Those speedlines are looking nice. . If only they were 15" it would be perfect. . Why did they get dirty so quickly. . Mine look ok even after 60 miles and I just washed them at jet wash and brand new again

Lol lol they look nice but Fox is not that good a good make....in my opinion of course!

Very nice mate! Similar to Rotas as well. Where did you purchase them from?

Right, Got me thinking again now...

Then some 15" fans!

Or just get 4x100 to 4x114.3 adaptors? That has just gave me an idea!

£749, £675 delivered with our Civic 5 discount!

Looking good with drop chief

I haven't watched it yet, I'll put it on my to do list for the evening!

Nope! Our man Dinochips is!

Random photo whore peeking out round the corner

Reminds me of my EU7. D14 with plenty to give.

Thanks I filled it with Super last night for the first time, reset the ECU and took it out for a bit of spin. It's perfect. Through the residential areas it's pretty silent. Over 4,500rpm there's def a more pronounced growl, but over 6,000 that's where it really comes alive. Def money well spent.

Out with the drinking straw. In with the cannon. It's a 2.5" cat-back system with a center silencer (it doesn't sound like it's silencing anything ) and a Turborevs back box. It sounds great, my MPG suffered greatly on the drive home with my constant revving. I'll attempt to get videos up, but it's a bit too loud to be doing it on my driveway.

no word's just pictures.... just one thing though, i could possable be the first person to have 16'' speedline chronos on a deck.....

I was a bit dubious about sanding the colour too but aslong as you get a good few colour coats down, then as grant said 1500 wet n dry (keep it really wet! Very VERY lightly rub over just to A. Get a smooth surface for lacquer to sit on and B. to remove any gloss finish from the colour so the lacquer adheres properly!!Good few coats of lacquer after that but make sure its proper clean before any paint is put down!! I brake clean it, rub with blue tissue then brake clean again then air line to blow it all off bone dry!! give it a crack anyone who weary of it... If you have something that NEEDS painting instead of just getting it done pro have a go first... Then if it goes wrong a pro can still do it anyway lol

Yeah! Some folk go for decibels while others go for that crisp sound and clarity!