Jump to content

**My 1st car project thread, MB3**


vtec2011
 Share

Recommended Posts

Nice one, it's a major improvement, how does she drive? Not too wobbly on the rear I hope.

 

I think you might be best getting some springs for an MB.

Link to comment
Share on other sites

Dont all shoot me but how about cutting a coil off the rears? Dont know how many coils are on them, but should be cool. In my old mk2 escort days i used to cut them in half! Bloody rock hard but looked good

 

Sounds good except for the fact the rears are already too low so if he cuts a coil off the front tyres are going to lose contact with the road, ;)

 

Maybe one off the front.

  • Like 3
Link to comment
Share on other sites

Nice one, it's a major improvement, how does she drive? Not too wobbly on the rear I hope.

 

I think you might be best getting some springs for an MB.

 

It drives absolutely fantastic! I noticed a difference as soon as I drove out the garage! The steering feels really sharp and a lot stiffer ( obviously ) It will be even better once I get the rear sorted out!

 

Only thing I am not liking is feeling every bump but I will get use to it ;)

 

Dont all shoot me but how about cutting a coil off the rears? Dont know how many coils are on them, but should be cool. In my old mk2 escort days i used to cut them in half! Bloody rock hard but looked good

 

Mmm.... I'm a bit dubious doing that :lol: But I will keep it in mind as I have a spare set of standard springs ;)

Link to comment
Share on other sites

Sounds good except for the fact the rears are already too low so if he cuts a coil off the front tyres are going to lose contact with the road, ;)

 

Maybe one off the front.

 

I thought James was saying cut the standard MB rear springs. Either way, I don't feel comfortable doing this :lol:

 

And I don't want to go much lower on the front because the front splitter already scrapes on the floor driving out of my place :lol:

Link to comment
Share on other sites

I thought James was saying cut the standard MB rear springs. Either way, I don't feel comfortable doing this :lol:

 

Ah right, good point. :)

 

 

And I don't want to go much lower on the front because the front splitter already scrapes on the floor driving out of my place :lol:

 

Really?? :o

Link to comment
Share on other sites

Ah right, good point. :)

 

 

 

Really?? :o

When I had my Cupra R the front used to kiss the road/pavement pulling on and off the drive, standard height too! 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...