Mr Brown's Project MB3- Front End Repair Underway

[KiNK43]

Gutted for you mate. How pathetic some people are

[noodels]

Some People are pathetic !!!!!!!!

[snakey135]

Disgusting mate!! They want a £3 led light and smash in your window for it!!

SCUM is a light insult for these to$$ers, words don't go low enough to fit their actions!!

[Roylewaa]

Shocking mate, scumbags, clearly kids by the sound of it, as if they were older it would have been for your ice

Is it far from where you live? As I'd be concerned that the little no marks have your house keys, and it's close to Christmas, worst time for burglaries

[KiNK43]

Yeah man change ya locks for sure.

[one4all]

what w****rs , i know sounds stupied to say but if someones gonna do it do it for more than a light lol not that i think this things right cause it aint , shame to see mate

[powerofdreams]

Fricking bawbags!!!!

[ammarbm]

That's shocking Mr. B. Are you sure that's not someone who is just jealous of your car and wanted to ruin it as if they wanted to steal stuff there were much better options available then only the interior light?

[Mr Brown]

Cheers guys i suspect my friend was correct when he said they probably saw me pull up and the scum wanted it for their car..

 

 

Anyway update:

 

Got this today from my mechanic/rover breaker £5.00 Lovely..

 

A Bit Of A Clean Later

 

So off to work fitting it....

 

Removed door card and was told by my mechanic it is possible to fit without removing the main window so this is how i did it...

 

Pictures are after removing but make it clearer to see how to

 

Remove Window Winder..  Pic shows clip you need to shift to pull it off

 

You Need A Medium Sized Cross Head Screwdriver

 

Then The Door Handle A Smaller Cross Head Screwdriver And Then Slide To The Left Carefully

 

Here You See How It Was Mounted

 

And The Rear Of The Handle Showing The Clips

 

Undo The Two 10mm Bolts To Release The Centre Bar

 

Pull Back The Rubber Seal At Top To Reveal Hiiden 8mm Nut

 

Now Push Centre Bar All The Way To Bottom Of Door (its tight but it does go)

 

Bottom Of Centre Bar

 

Now push The Weather Strip As Indicated In Pic Or Centre Bar Will Still Be In The Way (be gentle not to break the clips i did not thankfully)

 

Then pull out old broken window and ding it LOL

 

It is awkward to get the new one in requires a bit of fiddling and then pulling the rubber over the inside part of the door but it does go

 

I Would Suggest You Heat The Rubber Seal Of The New Window With A Hair Dryer Before Fitting. (i did not as it was raining and i needed to do it in a hurry so i messed my rubber up visually a little bit but still water tight)

 

Ensure that the centre bar is still on the window inside the door and facing the correct way at the top when fitting new window

 

Then refit window seal at top slide the centre bar back up into place and refit in reverse..

 

And You Get This

 

Look At The Mess Poor Little Car

 

Twenty Mins Later However

 

 

Although this method worked and had i used a hairdryer i prob would not of made the inside rubber look untidy if you have time i would remove the main window and then it just slides into place

[Mr Brown]

Excellent news i got a locksmith guy coming tonight at seven he says he will supply a new front door lock and a new patio door lock both with three keys for £110.00 all in