Leaderboard

Once I'm able to, will be adding a Civic5 sticker to the window. I've decided that I wont be doing the MG front end swap now. I'm happy with the way the car is and other than a new exhaust (to stop scraping) that'll be everything. Other than making sure she's running at top health and such. The reason for that is I've finally bought one of my dream cars after 9 years, and will be working on that for a while. (but don't worry, I'm keeping the 'Deck! )

Was the Clio going to the tip as well then?

You watch, the git will turn up in the SMX

I'd be looking at grinding your front fork down for 10-15mm. I think your heading for a car that handles very peculiarly with all these mixed springs and shocks. So if it's all good at the minute. Mod the fork!

Tinted windows do give a homely feel to the car also naughty times in the back lol I mean eating chocolate and cakes lol

Chrome be gone! Grille be?

Better shot...

Wow, let's all sell ours for a tenner less!

I'd have bought one to help with the center console if I could!

Don't look at Michael's Accord thread then!

Neighbour text me saying he's bringing a snap on impact gun back today so will give it a bash when I get home! An impact gun is something I should invest in as they do safe time and hassle.

Treat yourself. My impact gun was 65 quid. It's a Clarke one from machine mart. It's awesome 550nm I think. That crank bolt will come out like it was only in hand tight!!

same as our house 3/4 are m's

I probably already said it on the 1st page.

Ours is slowly becoming a house of Honda's again! Two Civic's out of four cars!

Just need it lowered now

Press both buttons on the clock at the same time, you'll need to set the time again though!

Cheers mate. Already got red ones after the mix up with the steering wheel one.

The new rocker with a much better base coat so should last on this one

Looking sweet Jake.

well had another good afternoon on it today misses found someone she works with on my nans estate so she was happy enough talking to her saturday is promising if tomorrows actions go well!! nearly there guys!

Simonize engine enamel. It's good s**t. Lasted maybe 3 years?? Only just started lookin bit scruffy. More from handling it so much than anything else. Then I just lacquered the plug cover. I haven't been using it for a ages but fancied a change and a sticker!

Haha thanks lil bear I know I'm going 50/50 on the fronts I put limo film up to the window lol looks like I would be going japfest selling washers from the window of my car haha lol

Cam cover looks awesome! That looks alright inside there, don't forget oil will drain away when the engines not running. Hopefully the oil you cleaned is as you say, just residual from the recent work.

The worst that will happen is the crack gets bigger until it reaches another edge, it's laminated so it won't shatter and fall off

He has put the fronts in the back of the car lol he had the film all cut and dropped it haha he was not happy :/ lol showed them the engine bay he was like wtf I wouldn't have gussed that was hiding in there pmsl

Those sizes are right from the measurements I have, I'd imagine the 120 would be a similar size to the MB6 one but might have the better drop links.

Tinted windows too ! Lush ! Which ones?

Been very mixed on the wheels but every1 who sees her in the flesh says spot on lol Going to get the windows tinted in 10 mins hehe I might be a bit excited lol

Thinking just springs. Only looking for 30mm maybe 40mm.

I would go with KiNK43 on this one n never cut a spring its very dangerous

Its worth it mate, there are a few minters here! I think dipping is certainly the new craze .. They do look amazing when done properly

It seats quite well but i could weld it to the seat to prevent that but for now it works good lol

Thank you for all the love I'm still kinda new and need to get looking at all ur cars will get on it tonight and have a good look through

Yeah but I don't like to be too aggressive about it, well not all the time.

Looks a lot smarter now dude!

You need one of these apparently, can be found on Amazon for about £40, search Honda crank pulley tool.

Have you checked the carpet in the footwells, hopefully not but it may be a sign the heater matrix is leaking.

Looks alright that apart from the loud wheels which you've already dealt with! As long as you plan to go pretty low then EG/EK will be fine!

Wheels look awesome dude! Top work

That's a bloody long day on it mate. And to then go to work!! Jeeze. Hope it's nearly done! will be good to have 2 M's on my drive

well i can tell you now, i am very sore!! been on the car since 1 and finished at 10:30 tonight!!! and im in work now aswel!! she'll be rolling by the weekend i hope!! fingers crossed it'll be rolling to Grants on saturday i think

Yes iv been offered one, just wasn't around at clocking out time to meet the guy. Will be thursday when i see him next

the option for the people who get stuck trying to remove the LCA bolt

For some reason I was worried about valves without the cam belt.....which aren't there because the heads off, blonde moment!

Wheels look nice mate, I didn't think I'd like them but I do.

All dipped in gold carbon

Oh! I love these EGs, especially in that blue. I'm off for a read of the rest of the thread now lol

maybe post a vid or 2??? Stunning example dude, OEM fresh love it