Leaderboard

after you put the vote up i will do as tom does on f/b and add a picture of all the entries to the post so people can see them all together

Free scratches too don't forget!

Ok update!!! Jacked front up, no bearing play or sound... Box is a bit whirly from underneath but nothing major... One of the front spigot rings had a little split in so took off to investigate, put back on making sure all square and tight etc... Now i cant hear the noise! Will see what happens on my journey home so no parts ordered as of yet! Hopefully i hear nothing on way home and i can focus on finishing bumper and get to cleaning!!

I've re-ordered my stuff to collect from Japfest so hopefully get into the cleaning side! I've never been a participant when it comes to cleaning cars! Mainly because of laziness but I have a new found motivation with the VTi-S but I am starting from scratch so my order is quite large! I do have to thank Nick for helping me get a list together for this!

this will be the 3rd spoiler i've fitted to a deck so shouldnt be too bad

Already blacked up the spare set, just need to split the ones that are on it now as they're better condition. May do it tomoz mornin dependin on wake up time.

Being randomBright sunglasses then the song came to my head I never wear glasses though

That was probably put up by some american who doesn't know what a "Saloon" is and thinks its a bar

The thing is, it's probably 2 days work, obviously it would depend on the car condition but from reading it I'd say that is for a rescue of paint that's been treated to way too many £5 car washes and is either full of swirls or sun damaged for example, so it would need examination to make sure there's enough lacquer on there and then a few cutting polish steps with continual examination throughout using pro lighting etc. Basically you'd be paying for his equipment. (oo'er misses).

I think she's close to it mate. God love her she's been a star, even bought me the MB for my birthday last year, as an early present, but she's not into the car scene, and doesnt understand the need to 'personalise' my car, and yet she put up with it for this long. But no more, its time I spent some money on what she wants for a bit. Plus I'd like a garage...

Thanks for the comments chaps, welded all unwanted holes and grinded them down yesterday. Filler added and sanding down First signs of primer after extensive sanding And a bit of colour Hopefully won't be too long before there is another update. Thanks

Your probably right simpo!! But i ground down my 17mm socket and made sure they were plenty tight enough all round today so maybe that was the problem? No knocking all the way home so so far so good lads!!

x3. It's always great when mum approves of modding.

Nice work mate

I bet it's because you nuts weren't long enough and your wheel was about to fall off! My mate had it on his 106 new wheels didn't get longer nuts going down duel carridge way wheel over takes him lol

x2.

Sounds promising.

Ignore the pictures... Just watch mine's video... And pretend like its the only car in the competition

Nice work, car is looking mean too.

Wow, helluva difference, they look a bit less blue too. Good seller.

Thanks for the hints and tips chap, awesome. I did warm it up originally but it probably cooled down a fair bit by the second coat. I didn't realize it could make that much difference. Everything else sounds like I was doing it right, distance, heavy coating and nozzle is fan like you say.

I do hope it's there when you go to pick it up!!

Measure twice, cut once! Spirit level will be your friend in this as well! Make sure you get Alex to change the bubble before you start!

Thats certainly one mean looking lip !

Cheers but shuts fine

This "should" confirm it for you mate. Towards the bottom of the table if it loads for you! http://www.eviltwinmotorsports.com/?page_id=253

You think the same way I do! Removing your name from the wheel of blame! Good plan Sir, good plan...

I will be using the bolts .. Wouldnt hold on if it was just taped. I will however be putting some new tape on it, try and reduce the likely hood of rattles.. Plus i can blame him if it all goes wrong

I wear my sunglasses at night... Can't complain about freebies well done.

As above mate. Also check your tyre pressures.

I will indeed be on! Only reason it didn't go on while it was still drying was because I'm going over the Alex's on Thursday to give me a hand! Don't fancy doing it on my own! Lol.

Think it should be all plain sailing now, looking good dude. Steaming away!

I do like a tucked bay, that's going look aware one when it's done. Top work!!

Nice and cheap! Will add it to my ever growing watch list! Cheers dude!

Day two of project japfest front end bushes and adjustable upper control arms.

I prefer the bottom ones in gunmetal! Think they'd look awesome against the colour of the car!

I will try one last time with the current look as it's changing this month http://civic5.com/forum/index.php?/topic/6870-mazs-silver-mb2-projectupdate-050514cree-sidelight-bulbs/

Passenger side is the cree bulb and driver side is 42 smd bulb. . And the difference is amazing Both bulbs fitted Trust me these are only side lights lol One with headlights on. I don't see much difference between the 2 really And finally a stealth pic

Certainly does work a treat

We'll today's mission rear end strong flex bushes in toe links. Strong flex bushes in lca's and oem control arm bushes In with the new bushes

i use bilt Hamber, and as said above, it needs to be warm to work with, once warm its all good i only use a squirty bottle of water with nothing else in it and it works like a treat for me

If you filled out ur profile might be able to answer your question

Cheap that, there's not a huge difference in height but if you have your heart set on an ATR then wait for one.

Finally got myself a bonnet and bumper in same colour lol

Well my lip spoiler is looking better this afternoon, I've offered it up and it looks much more like it, not the greatest finish but we'll see what the polish does. I couldn't really get much done yesterday because this was happening. So got on with some polishing today. So all nicely polished and waxed, she's flipping beautifully now. Lip spoiler drying in the background.

Oh wow!! Can't wait to see this finished. Give him a break, he slept under his car last night with a paintbrush up his nose.

Now thats some type error right there

LOL my mrs and i were looking at some metal shed affairs earlier as we decided i needed a parts locker as they are building up

This will give the bugger an incentive to unveil to everyone else!! Mr Chandler. http://civic5.com/forum/index.php?/topic/4475-chandlers-aerodeck/