noodels

was going to buy but London !!no like London

Just tried my pk9 oem ecu,as was running rich on my chipped ecu, =Terrible that meant a reset in the whole process of the chipped one being replaced,if that works with chipped ecu.. does run better now. good to know the chipped one is giving the required with my set up with the sk2 inlet/cams

Think maybe jdm non airbag ones only fit from the early Type R.Dc2

EP3 gets very good results modded to be fair but its not cheap for the parts. An S2K even more £ss everthing is 1K or more oem suspension <Showa> seems better than most for under £1k & very good tbh and about 8 revisions spring/arb variations from 1st to last MY ,Bilsteins would be very nice indeed and made them for the "S" with Hondas guidelines £2000 i have one of the best vintages 04-05 apart from the CR <club racer> nice to see you back Jamie

looking good

P72 is limited to 115mph btw so would need socketing anyway mine comes in at 5200 rpm with sk2 inlet/cams nice cruzing speeds, think they are 10.5 :1 on the Sri beware "basemap" its just a base map p9k ecu would be ok for now Hondata 300 would be a better way to go

Just have to knock the internals out at exit to make it the same,might even be the same tbh.. someone did get one and repainted it for a swap<think it was the same also> So i think the only upgrade here is the heatshield

Maybe upper Links have skunk2 adjustable on mine<for lowering camber angle> http://www.ebay.co.uk/itm/Skunk2-Pro-Series-adjustable-rear-camber-arms-Honda-Integra-Civic-EG-MB6-EK-Sol-/261324568507?pt=UK_CarsParts_Vehicles_CarParts_SM&fits=Model%3ACivic&hash=item3cd82877bb upper Links<not sure correct part for yours> http://www.ebay.co.uk/itm/REAR-UPPER-LINK-ARM-FOR-HONDA-CIVIC-1-6-1991-2005-FCA5930-/331236814453?pt=UK_CarsParts_Vehicles_CarParts_SM&fits=Car+Make%3AHonda&hash=item4d1f40ae75 after mkt. http://www.ebay.co.uk/itm/REAR-CAMBER-ARMS-KIT-HONDA-CIVIC-92-00-EG-EK-INTEGRA-DC2-/400429055264?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item5d3b6e7d20

http://www.halfords....l-diesel-oil-4l Billy Bargain

Am thinking "i Like this car"

ITR"R" dual bend arrived and now fitted, had to cut 8mm off one side of pivot/bearing area with hacksaw<mb6/mc2 standard linkage used>very pleased with results.

They both have 4 wheels

I just noticed the R knob looked off center and tried to straighten,and came of in my hand,no force needed. I do keep looking at her and getting loads of attention from the public rubber necking !! 2 Hondas on the road at once !!should have done this ages ago - < >

Well could not resist re-taxing the Deck Today after clay bar and a tidy up from much dust 30 mins into being legal the gearstick snapped of at thread !!! Got an Type"R" one in the post ..

Wise choice sir.

I like silver

Its coming on well now,and ^^what he said

so would i,if it dont sell will maybe run it up on 1

Price now reduced

4yrs approx > 29/03/2010 my birthday present from me 180+15% tranny loss powerwise+ 4-2-1 +TypeR catback+twinloop -another 5 or 6hp there also.about.200.

^^^ Yes sell it Dave and buy mine or a car transporter and drive all of them around at once

The above MC2 is in the For sales section,time to let someone else enjoy it. http://civic5.com/forum/index.php/classifieds/item/50-mc2-vtis-spoilers-sk2-cams-inlet-itr-twinloop-ect/

R.I.P Nick

Good on ya for all the work done swapping the motor in