noodels
-
Posts
4,657 -
Joined
-
Last visited
-
Days Won
24
Content Type
Store
Calendar
Forums
Gallery
Downloads
Everything posted by noodels
-
Brings back memories
-
hairdressers car !!! you should know Tom
-
3 x insurance policies !!!! 3 x tax 3 x mot = - £s OD
-
Hope to use it Nick before the mot runs out in September ,yes its tucked away in one of my garages Sorn since December 1ST 2013 Still start it and move it out to get to the work areas and the bench & vice when needed. still on the button every time And i still love it but am 2 timing
-
Do miss driving it,polo is better for my daily thought about selling the MC2 as well !! the "S" for the eve"s,weather permitting
-
May be the wheels are non oem and offset is changed then may have problems.<17s OZ racing> Adjusted my rear so just missed my slightly rolled arches so not to rub. Getting one of these in the post Tuesday to do some settings on the "S" will be handy for the future calibrations http://www.machine-dro.co.uk/angle-measurement/wixey-wr365-digital-angle-gauge-with-level-and-flip-up-display.html
-
Changing cams=,dont loose the camgear woodruff key i droped mine took 1 hr to find it
-
shell v power.
-
think the 1.6 have a sensor and 1.8 dont and smaller bore on 1.6
-
Congratulations Hubert -
Had a nice chat and a BBQ with Matt Neal and Gordon Shedden NOT!! Yes i did go. Bentley boys gt3 was very fast
-
Beware they do not change the fueling, an ecu/chip swap is the correct way to do it.
-
http://news.snetterton.co.uk/new-honda-tourer-tests-alongside-btcc-rivals-at-snetterton.aspx
-
Gutted for you Simon
-
voted
-
desmodromic had that on my 3 X ducati"s and have the roller rockers on the s2000 will read more later cool find Jake
-
you will need to turn/grind the middle shank of bolts to miss the damper leg. btw, also you not forgetting to remove the ring/brake hose support brkt on the front damper unit. still got a set of dampers/springs units in the garage come to think of it with 45k on them .
-
My Civic MA The Story Continues, She’s Back :)
noodels replied to skitzma8's topic in Honda Civic MA/MB/MC
Hi got some MA. EK9 "d" headlights if you WANT them ? -
LIKE this to raise to miss sk2 manifold , but with correct thread http://www.ebay.co.uk/itm/390064794392?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649
-
got 14kg front and 10kgs rear d2 coilovers<EK>very short at back !!mine was the highest it went, but they are ok also depends on the make of the coilovers regarding high spring rates,
-
glad you like and got home ok.
-
quote: gap at the 3rd point against the bulkhead fitted nice to my bulkhead with no washers,may have just wound the bolts tight to get it all square. also sk2 inlet get in the way,>>seemed to be a no no, but didnt try too hard tbh just needed to get rid of parts not being used atm.
-
Did have just sold it to phil fitted alright on mine,<apart from when i fitted sk2 inlet> maybe 1 or 2 washers would be ok sure its not fitted wrong.
-
sound better with 2.5 doesnt upset the speed of gas,depends on your tuning mods ect they fit oem on teg thats good enuff for me. same,ish engine anyway
-
All Motor plenty enuff power to weight ratio,and yes drivability is nice, also a lot more than meets the eye with forced induction regarding the $$$$$ usually X3 with this type of mod thing.
