Jump to content

NIKH25

Civic5 Supporter
  • Posts

    11,678
  • Joined

  • Last visited

  • Days Won

    67

Everything posted by NIKH25

  1. Proper size photos. Looks good mate.
  2. always had a short intake andrew and no problems the flat spot goes when the car is up to temp ie: when the thermostat is open ! i reccon its the fueling ov the ecu thats the problem but doesnt realy bother me as it only does it once or twice untill its been past the vtec then doesnt do it again untill its cooled back down Is it worth drilling the thermostat.
  3. Cupra will still be more torquey, with low down power compared to the M. EP3 designed for out and out performance, as said if you keep it in the power band (above 4.5k) it does shift but is designed as a compromise and with the idea of it being easier to live with as a daily driver. Suspension is the worst aspect of the car and the first thing you should modify.
  4. Nice mate, they look nice and subtle drawing the eye at the same time. More subtle than that guys tash anyhoo.
  5. NIKH25

    Offset

    Should think it will be fine if you sticking with 15's. 17's you may need to think about rolling the arches.
  6. Nice, should look with the BC's on.
  7. Smart work mate, pics of them on the car.
  8. Looks good mate, nice and clean.
  9. This one?? http://www.civic5.com/forum/viewtopic.php?f=141&t=2804
  10. bargainJob well jobbed. Nice.
  11. They're the followers from the cam that push open the valves. When the clearances are not right the valve tops are hitting the followers on the return iirc. Anyway: http://www.civic5.com/forum/viewtopic.php?f=86&t=404
  12. Oil change may help also try an ecu reset.
  13. Don't need to split the ball joints mate.
  14. I would try changing the oil first.
  15. Super clean MA mate, great work.
×
×
  • Create New...