Leaderboard

Or urinate uncontrollably the first time you hit VTEC!

Another wee pic from today

Matte for Matt, who'd have thought it! Looks good mate!

got mine all sorted, mtec disk's with ebc black stuff pads, what a combination, the disk screw's will go in any hole on mine, most likely down to rust in the thread's...

Thanks. I did manage to put the rears on today, just didn't take any pics of the full stance. will do tomorrow for sure

Loads better mate! Did you spray the spoiler matte black Matt?

No smoke at all in the last few days so that's a good sign I got the headlights done. I left the orange indicator cap in but removed the clear lense as I think it looks too plain with clear indicators I have also got the Wolfrace wheels resprayed so they are left to dry till Monday. Can I put the wheels on without lacquer? Because I'm skint till next pay day now

Lottery win..... Then it would be as GT-R engine or the vw w-12 from the pheaton with the turbos from the Bentley Continental GT

More when she's lowered

I'm too quick for 'em see... When they were checking my "bag" i grabbed my meds and headed for the door 🙌

Another pic with the wind deflectors on

Slatted badge less grill is definitely the best look for these.

Yeah probably, probably end up leaving it for today as nobody that has a clue is around to help, what's another day eh? Lol

P72 map with lowered IAB. Waiting for 2 other parcels from the states for socketing and for adding iab controls to the p28.

This came yesterday

Also a minor update for you guys, but major for me. I HAVE FINALLY SPRAYED AND FITTED A ZS SPOILER If anybody is sad enough to remember, I have wanted a new spoiler on since I got the car, originally buying an ITR Spoiler, then finding out it doesnt bolt straight on, and then chasing after a cheap ZS spoiler for months. I have never been so happy with the car. Plus I removed the A/C rad, marking the beginning of the A/C removal, but my chubby hands and arms make it a long a*s job, plus all the plugs and wires attached to it make me nervous, as I dont know if any are important! Pics with the spoiler will appear as soon as i take some!

Don't shout at me... I went for eBay specials. I don't drive the car hard often, and more want to get the lows for looks, as opposed to handling. I did originally plan MG ZS setup, but I wanted something with a warranty, so they were the best way to go. Assuming they eventually arrive that is, as they were out for delivery yesterday, and never arrived.

Yeah why not! Just digging in the garage for the bleed kit ready! Can see it but can't get to it

Grill looks kool, very clever how you've done than mate!!

Looking really nice mate

Just randomly woken up and now I can't get back to sleep! Just looked outside and it's dry so I'm going out to carry on, yes at this hour!

Walked home in a record time of 90mins covering 5.5 miles up some big hills too! Then had my dinner and straight out on the car! Sadly I've only gotten one corner done but that was changing the brake line as well! Looks 4ucking fantastic though!

couple of small updates finally got lca's fitted bloody nightmare of a job seized bolts but got there in the end slatted grill few small bits under bonnet and just some random shots

I just had time to throw on the fronts today. Will do up the rears tomorrow. Here is just a recap. Feel free to check the build thread. These are no where near slammed or as low as I want to go. Will update that once I make adjustments.

Well after an un-eventful day of failing registration for a faulty SRS light, trouble shooting the problems, and still not being able to reset the SRS light, I gave up. Since time and day light were running out I decided to throw on the Apexi N1 Dampers on the front of the car. Dealt with a couple of stubborn bolts but they came off after a soak in WD40. A side by side comparison Fitted in its home And here is an after shot. I also had time to put on my front lip as well. I am really liking the set-up. I am hoping to finish this up in the morning before heading out with the family. So should be lower at all four corners tomorrow.

I know. Just joshing. Best be all good. Current box is embarrassing! Louder every day

Hi again guys Today i'm bringing to you my lasts purchases. Yeah, I'm sure you thing that i should fit what I've got before continue buying, but this month I've been completly busy with the university (next monday I'll finish my degree) and I couldn't touch the car. However, here we go with the pics. In first place a brand new headlamp. Yes, nothing special but I'm proud of him And the other thing... well if you thing the mb1 front lip is like an unicornt, then I think I just found a pegasus XD Brand new genuine civic 5 dors side garnish covers. Next week promise I'll fit everything!

You mean to tell me,,,,,,,,that if I find a Unicorn, and get its poop, I can add it to the elixir of eternal life? DAMN!!!! I have been using stripper's tears all this time for nothing!!!

lol update time! Krzys you is right mate, had to replace both rear calippers, and one of the ones i bought (both reconditioned calippers) was the wrong one, so took time to go get it exchanged etc. Glad to report though, brakes all replaced now, fluid replaced with dot 5.1 racing fluid, and she's match fit again! Now for the blingy bit! I bought another cam cover from a member on here, and decided to fit it so I could get Rubys original one stripped and prepped for customizing. The one I bought had been done red, so looked decent, although the red was starting to flake off with it lying about the garage. Anyways, hit a big problem when getting the rocker cover off! All the nuts came off easy appart from the one in the corner next to the oil filler cap. This just kept spinning! A call to Rich @civicturbo79 and it was decided that the stud must be fooked! So went to Honda and ordered up a new stud, along with new washers and nice new shiney chrome rocker cover nuts. Got the stud out and cover off with help from @Jim (big thanks mate!) so time to fit her newly finished cover! I spent ages metal polishing it, but decided rather than have the whole cover metal polished like most do, I wanted to have some of her body colour on the cover too. So after much work, here's how she looks now under the bonnet! Also forgot about the vtec solenoid cover and rad bracket I bought a while back, so first pics of them are there to see! The offending stud now replaced with new one Lots of new wee bits from Honda! Cover done Rubys bay! The cover isnt 100% perfect, as the masking tape pulled some paint off! But now I know where I went wrong, I'm doing the same with the spare cover only this time it'll be spot on and with a twist! Hope you like. Deck to do next!

Yer they can phill was going to do mine but they need to have a big tank and a lot of prep and masking off needed . Had more stuff to dip Looking good phill