Leaderboard

Like Mr brown could not put a full cost on it .I lost £4000 when it got trashed £900 alone on gauges all nicked when the car was striped And that without the 6 months trying to get the litres of oil and shxx out of the inside that was emptied all over the car in and out . So if you forget all that cost and start on the build a lot had to be custom fit ( not been done in a Mb2 ) and things built from ground up so lets just say shxx loads :lol:

You took the words right out of my mouth.... I shall play that again even louder this time and i think full sub is called for here

Been and got the torx set, all done!

Mystery solved.

Mx5 looks the dogs! But prefer mk1s cos nothing is cooler than pop up headlights lol Well i know what ur car looks like so i can drive away quickly to save my foggies lol

The weather has been great today so I got busy! Before fitting the VTi-S interior, I gave it a bloody good scrub and hoovered the car out. Everything was going smooth and then realized the rear seat catch mechanism isn't the same! It all lines up but doesn't catch. I hope to sort this out soon! I have also fit the middle seat belt wrong which you will notice in the pictures below I then fit the VTi-S skirts, I absolutely love them. I might not bother respraying the skirts because hints of pirates black pearl comes up in the sun The skirts also make the car look a tad lower, goes to show how desperate I am wanting to lowering her Whilst it was still day light, I gave her a quick wash Unfortunately the rear seat catch mechanism isn't the same but I hope to sort this out soon! Now I got to store the old interior somewhere

LOL best you savor that comment mate, im as shocked as you are.

Looks like you got the better end of the stick with the swop! You won't need those fogs will take them off your hands for you lol

As above quite common heat shield rattle. But you learn from your mistakes, I wouldn't be able to change half the stuff on a civic if it wasn't from having a go and making mistakes and learning from them!

I know, there's just no need for that sort of arch gap.

If you have no luck, I can pack my rear bench into the car for JapFest, and you can try it out. Mines the lap belt, so if that ones no good, mine should fit?

The rasp is incredible when the loud pedal is through the floor!

Cheers lads...hopefully This how it looks now.. This guy using the same springs as the ones i got, quite subtle but a improvement

If he's driving the MB3 he'll more than likely be at the back again. BECAUSE TOM DID NOT STOP AND WAIT FOR HIM !!!!!!

that dose look weird but i think its because they screwed the grill up n picked a s**t bumper lol

Ok was going to enter Huberts car, but someone beat me too it! Was going to enter this car next month but seeing as not many cars so far this month, may as well put it up. Awesome car, which is still very much evolving http://civic5.com/forum/index.php?/topic/3574-honda-civic-5d-95r-b18c4-vtis-by-zoy/ Got to be worth a couple of votes just for the only M running 10's on the rear!

N this is my m8 grants daily and it has a 1.3 turbo with about 280bhp lol its fun to be in

Do both!

Ok been a good day so started a few jobs on her got heater working ,well till I put her back in her home only to find it was not working so within a few hours it went from working to not working god knows why arrrrrrrrrrrrrr . Put one rear door card in all nice with carbon and retrim what a xxxx getting that back in , put my neo chrome nuts on that's it o had a little spin in her just to check vtec was still working lol Next fuel tank

Looks the part! Respray the grill and then the front-end is complete! She's getting there really nice now mate

Finally got round to fitting the vti lip!

I always check mine when it's cold

Oh yes need to get my posts up cos I'd like to have civic5 sticker on my car for japfest

LOL many years of blood, sweat, and tears and plenty of funds will be the answer i expect....Like most projects of passion he prob could not put an exact figure on it

Some beautiful cars there

Now that's a bargain mate!! Looking forward to the vids!

Thanks for that I carn't wait till I start stripping her down and start putting new parts on

Thanks, yes, yes I did.

Nice Car you have got there, you have also got the optional extra fog lamps which are rare aswell. What plans do you have for it then?

If it's only until May just leave it as is dude!

Don't call us we will call you !!!!

A.K.A Bhm (Boss Hat Man) AKA Mr Sneaky i will be looking out for you as i travel from Gravesend to Lakeside almost every day,but I'm often in Erith @ Dynotech

whats happening with the post count. seems to have got stuck lol

A few people have put ATR or CTR in, I've seen S2K seats in two others but the only person I can think of with actual aftermarket buckets was James, who had a pair of Sparcos.

i get called mr brown in real life as well so quite confusing

Strut brace stripped and polished.

So this morning I had a look at the prelude stalk, connectors are very different! With it being so windy and not having much of a clue I've left it for now, will need to do some clever wiring to make it work! Standard cables Civic vs Prelude stalks (Civic Top) So with that I decided to finally fit my leather gator and genuine Honda gearknob! With the VTi-S knob New knob! Don't worry, I straightened it out before I called the job done! I'm going to head out later and get myself a T30 socket so I can ratchet the airbag torx bit off and get the DC2 wheel fitted!

Anyone fancy adding a pic of my car into this as i cannot do it on my phone and when i went on civic5 on my pc it caught on fire... New pc needed!! http://civic5.com/forum/index.php?/topic/8081-stephens-mb2-maybe-h22a5-project/?hl=english#entry168062

This one for me, Hubert's

Is it a permanent deletion or can you out them back on?

That's it, everyone is entitled to their opinion and it's not worth "hating" on others if you don't agree with it! That's what makes this community so great!

Dc2 front with OEM bumper might be the way to go if i was doing this!!! As said so many varied opinions on this... Shows the capabilities of this forum... So many different views aired in one thread but all accepting each others views!! Great stuff C5!!!

OEM bumper is much better!

Here... I think it doesn't look right on a MB though

It's got EJ coupe coil overs on it. Nice and firm but surprisingly they are soft and comfortable and don't cause a mega harsh ride