Krzys
-
Posts
10,000 -
Joined
-
Last visited
-
Days Won
274
Content Type
Store
Calendar
Forums
Gallery
Downloads
Everything posted by Krzys
-
It is most definitely a do it cheap, do it twice affair when it comes to this!
-
Yeah, furthest away and worked towards the master cylinder. Two man method with a bleed kit, kept the fluid topped up at all times. Mate reckons the new bleed valves might be letting air in. Least it's a cheap item to replace.
-
Well bled the brakes again with help from my mate and a fair bit of air came out and the pedal did firm up. Started the car to do the handbrake and suddenly after a couple of pumps it's spongy again like before! My mate said he noticed that when undoing the bleed valve fluid was seeping out of one or two corners so it could be the bleed valves aren't doing their job properly. Adjusted the handbrake and the offside does nothing and the nearside now holds the car but isn't so strong that I would park it on a decent hill. Losing faith at the minute, been on auto trader today...
-
Maybe he will have to buy an incomplete deck and acquire the missing parts?
-
I would say the turbo itself and manifold should be the bits you concentrate the money on. Piping is piping to me, probably injectors if you're changing them shouldn't be cheap either.
-
Difficult how?
-
I'd say it was worth it! Can't say it was damaged in transit that way!
-
I would have thought the rails would mount in the same holes?
-
Very nice mate!
-
Me in all mate
-
My PB MB9 Aerodeck! Engine rebuild in progress
Krzys replied to vtec2011's topic in Honda Civic MA/MB/MC
Sweet dude!! -
That's not such a bad thing!
-
Hope it works then! I only paid about a tenner for a brand new one from a motor factors, no issues.
-
How good is that?!
-
Or forceps!Where's the lows? Or has he gone so low he's beached somewhere with no food or water?
-
Cool! Will be something I'm going to look into in the future, been watching videos of Spoon Civic's too much haha
-
That's pretty bad, shame it looked so good in the pictures, the guy had ran it before you came then. People always ask me to let them know when I'm close by and for that reason I never do! Good luck with the sale dude! Shame to see the Accord go!
-
Bargain! Good luck on the MOT!
- 943 replies
-
- 1
-
-
- honda civic mb6
- honda civic vti
- (and 5 more)
-
Can I assume it would just be the springs along with the cams if you wanted more revs? Valves themselves and retainers would okay stock?
-
I think if you're wanting to raise the rev limit beyond that you'd need the uprated springs.
-
Twins?
-
-
Haha sorry dude, actual decent answers had already been given in Grant's post
-
Going bang sounds good to me!
-
"What the Heck??" Smitty_Works MC3 Aerodeck
Krzys replied to Smitty_Works's topic in Honda Civic MA/MB/MC
Yes have a good time buddy!