Leaderboard

Finally alive enough to get some pictures onto here! So driving south on the M11 at errrmmm some rate of knots I managed to miss the M25 junction so ventured to the London North circular where the sat nav decided I needed a ferry! Anyway got to HarVTEC's for about 2115 and was chatting with him until just after 2200! Rang the hat man of Esq and arranged to stop by on my way back so I could give him the MB6 ARB! On the way back I was cruising along the M2 when I saw the silhouette of a police car in the middle lane - thought nothing of it! Then as I got closer I noticed there was a second one in front of it but they didn't look quite right, no reflective stripes! They turned out to be American police cruisers! As I was going by at 1 or 2 mph quicker I was having a look at them and they'd clocked me looking at their cars, then for no reason at all I dropped her into 3rd and floored it! Both stuck their lights on and chased me! This went on for about five minutes, it was epic! Then they had to come off and that was that! I found his stash!! Anyways we were chatting and chatting and next thing we knew it was 0130! Ooops So set off home and had an uneventful drive back to Notts! 0430 I got back! Mad but awesome night! So Saturday when I eventually woke up I got a couple of pictures as I was putting the wheels in the garage, they'll be going on the car when my nuts arrive!

Okay so did the headlights again, they came out really well actually, but annoyingly a different colour blue to the fogs so might remove it Also used a bit of the blue film to do the reverse lights on the back Added some nice H&R sparkly stickers to rear quarters And fired up my vinyl machine for new rear window vinyl (going to be EastCoast, the West is for Kyfer!)

VIP MEMBER BABY!

That should come with one bullet, and one of these:

Ok everyone the time has come to Unvail my new wheels. So after along time with my team dynamics I decided it was time to move forward and get a completely new unique look to the car. So after much saving and an deciding I choose A baad neew set of Rota's After deciding to get 16's i also need new tyres so hooed myself up with Maxxi's MAZ1's So new rims and new tyre's to be honest im just going to cut to the chase and give you guys my new look I decided to go back to my MB6 kits as vti's didn't suit my car as im sure most of you would agree. I also had a problem rolling my rear arches which now needs the attension of some body filler and a respray which did annouy loads but i will get it fixed. Carbon fiber carnards all fitted aswell the car now looks like this hope you guys approve I will have to get some good phot's for you this weekend as I should have the last mod arrive fo the front end but hope you guys like the car I no I do and its only going to keep getting better

Will upload a couple photos of the making of little custom item I made So lokking at the front of many civic I grow to really like the look of front bumper canards. after doing research found the prices for a little bit of shaped carbon fiber are ridiculous. Sooo I decided to make my own started off by making some cardboard ones to get the profile of the front bumper once I had a near enough shape I was looking for a photographed it and traced theprofile in CAD and managed to smooth the edges off. This then allowed me to laser cut the profiles I would use as a stencil. I then ordered a sheet of 2mm Carbon fiber already cast which I can then used to cut up. Once cut up into the correct profile I bought some tasty little 90 degree brackets from B&Q which will allow me to fit the to the front of the car after I epoxey'd them on will upload the final photos in a sec my internet is rubbish tonight

Why is it not lowered yet??

Is that the one with the really long tongue?

Yep, with Grant Mitchell in the boot.

Yeah only sticker I could see was I love my mb etc but just read gold membership and civic5 sticker comes with it so I am all paid up now

Think it is oem part off a rover. For OAPs to store spare bags of mint imperials

I see u boys are well busy at work lol heres a funny image for ur imagination, picture a t-rex trying to scratch its arse lol always gets me through the day

Plastic bag on the discs? Thought you'd have taken the wheels off

Wheels look awesome! How much plastidip has it taken to do them? If it lasts well I may use that on my two sets instead of getting them painted as they are in really good condition!

You are magic! That is just awesome mate! I will PM you soon! Nice job on tinting the headlights. Even though they're not the same colour as the fogs, I think it still goes well together!

Personally I don't like castrol, it seems to make the top end noisy. I use 10w40 mobil1.

I loath french cars with every bone in my body n ill take them all out one day wen my precious is finished yes, she'll feed on them she will yes !

Mike they both are coming to Japfest.

Sooo updates updates... Well yesterday I turned 21 so for my 21st birthday me and some mates decided to go to Santa Pod for the RWYB day.. And what a day it was! Weather was brilliant and I did 3 runs, 2 of which were against Roj and had an overall good day. Here are some pics of mine and Roj's MB6 together aswell as our timeslip from our best run. All my runs were with a passenger which added 80kg to the car, and 3/4 tank fuel as well as running on absolutely terrible runflats. I managed to run a 15.6 at 88mph with a very good 60ft time of 2.2 for the tyres I was on, as well as it being my 3rd run ever at Pod. Some pics with Roj's MB6: This is the timeslip for Roj and me on our best run, Roj on the left and me on the right. Well chuffed with our results and very very close races too haha there's nothing in it till 3rd gear but RWD launches harder than FWD in this case! Some pics are stolen from Roj but I'm sure he won't mind! Was a great day and I hope next time if I haven't got my new car already we can run again, and you'll get into the 15's and I'm going to try and get 15.3 with a passenger and break 14's solo!

Will try doing that, but it does tend to be at speed (30mph plus) and not all time time...starts about 5 minutes after driving most of the time and doesn't seem to happen when its wet. Why i was thinking the CV joint personally. But I'll honestly say im not sure on it myself Hoping to have found out & solved it by the end of April though!

Depending on when my course refund comes and what the insurance costs I might and I stress might, be able to get some bought before Japfest!

Yeah. Maybe I'll get a new/chipped ECU at some point and lower the IAB engage point. That should help. Ah I see. Yeah you hardly notice until you look closely anyway. I'm a little worried in case water gets in the gap but I suppose since the fog casing is plastic it shouldn't end up like my OEM fogs.

98 spec DC2 style! Haha that would be mad! There's a delay on lug adapters that I ordered with the nuts so I've said I'd wait until they have them in stock before they get sent out, I'm in no rush! Will need lows after so this means less time of being hassled about lows

Lol thats sods law sounds like a bush in the sector possibly did you hold the shaft wen u screwed the nob on as the click u heard might of been a bush popin out of alignment or worst case snaping have a look from underneath the car before you take it appart it might help

The stickers come with the membership, you should now have the shop tab available.

Self administered?

COme on, get them on, stop teasing!

Cool stickers dude!

You want the V8 sound thing instead http://www.youtube.com/watch?v=m9QbrhoBISU

definitely could be alot worse,ive had them on for a couple of months now and havent bothered me

I like where this is going. I. Staying tuned!

Use autoglym tar remover mate to get rid of old badge adhesive ...works a beaut. Put my vinyl cutting equipment away for the winter, but was doing loads last year. Gonna get it out tomorrow and fire it up! Loving the sig

It's sticker time! There is a car decal / sticker shop recently opened locally which is ideal! They got JDM stickers, sticker bombs, funny stickers, VAG s**t stickers, all sorts! So I picked myself some stickers which I thought were red, but they're pink... Oh well, they still work

Brilliant lol

Well, the mods have started! Picked up an absolute bargain the other day! £45 for a 4-2-1 Manifold and a Decat too! Also purchased a Pipercross Panel Filter with MB Airbox and Aluminium induction piping for £28 too!

I bought one of those, had to send it back though as I couldn't hear it over VTEC.

Thank you sir mr. Brown!! Wednesday is the hopeful fitting day!!

hello, really sorry to jump on the thread, im the girlfriend/mechanic/garage owner, craig will agree with me when i say one of me is enough. so sorry, can't clone me

That is an awesome looking deck hubert! The steels suit it down to the ground. One qusetion tho, the black bit on the top of the rear bumper by the rear hatch, is that something you have stuck on top or a load cover for the boot that covers the top of the bumper as well? only asking as mine is battered from loading stuff in the boot and scuffing the bumper and wanted to protect it somehow cheers Dom

Still one of my favourite cars on here. Really looking forward to seeing the new wheels on. Please make some more projectors for us. It'd be a nice wee earner for you

Ha Ha Ha, Just stop it LOL

Love this deck, congrats mate, a very worthy winner!

Always a bonus with wheels.

Those wheels look pretty round!

Congrats, man. Loving the stance.

I just been given a inlet manifold today (I cannot remember what it came off, either a D16Z6 or D16Y8) and I'm wondering if there's any point fitting it to my MB3? It's got the throttle body, map sensor, fuel rail and injectors attached to it, BONUS! I can't see how it would make a difference in power but I thought I ask anyway... Thanks

It will look something like this. This is with stock MG ZS mirrors, I haven't seen one with repeaters. But I think oem MB6 mirros look better