Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 03/19/2014 in all areas

  1. Another little go at the photoshop on my phone!!
    4 points
  2. Fender washer already here .... This is a copy of PWJDM, but I do not think I would have a problem with them. Does look pretty good and only cost me £ 5 for one pack .... lol
    3 points
  3. Just found this thread, loving the idea, Civic5 Monkey + Back-up need to make appearances at meets.
    3 points
  4. Very nice! I need a purple set or neo chrome
    2 points
  5. No no! No it doesn't! Then you end up with this!!
    2 points
  6. There's an MB5 Domani, it's a 1.6 with 4WD.
    2 points
  7. That's quite a trick, I can never get the angle right for that.
    2 points
  8. Btw...bought and installed a new pair of tailgate stay assemblies. The old ones didn't work anymore. Small but important update because the rear hatch would not stay open.
    2 points
  9. Finally i have swapped my ugly, rusty, totally fxxxed up old fuel tank against the new one that was stored in my garage. There was no more time left for the swap...the old tank was loosing fuel everywhere...!!! Monday after work with a little help of a friend of mine the operation started...car on jacks...me lying under the car most of the time. Took around 2 hours until the new tank was installed. Finally an important point on my ToDo list is finished and i can drive around with a full tank again...!!! Haven't seen this for a while:
    2 points
  10. I took my time getting he holes even and in the right place but i would -/+ 0.2mm which is not bad. The holes nearly 19mm and the nuts have a shoulder that goes into the holes to locate. Cheers guys! The ally centres are going black and i will do my best to polish up the dishes. Not long now, will order some tyres at the end of the month.
    2 points
  11. I like Grid V's. A victim of their own success. They look wonderful on almost any car. imo, the edit above is a couple to a few inches too big. I think you should slap on some 16x8s and sink it down on coilovers
    2 points
  12. a little update, was on the fb forum for them as they are more active than the actual forum itself. someone popped up with a cheaper one with toys and everything else on. and its closer to me!! I should be viewing Thursday when he gets back to me tomorrow with some pictures
    2 points
  13. woop woop now I get a chance to get back online properly ive now a VIP yes also cars on the repair as I think my led lights could be a connection as they now flicker the rust is treated and now just needs rubbing down to blend the colour
    2 points
  14. Guys looook what i got today :D help.gif1 help.gif1 help.gif1 Guys is there a How to for removing grill and fitting new one? cantt waitttt to fit it :D im very happy today haha :D
    1 point
  15. 1) powerofdreams' wife's MB2 2) Dinochips MB6 3) vtec2011 MB3 4) rover5 MB4 5) ammarbm MB2 6) One4all MB3 7) MB3Matt MB3
    1 point
  16. Ok, stuff it. I just wanna see what people think. Build thread in sig Just dont hate on her too much, she's ace
    1 point
  17. 1) powerofdreams' wife's MB2 2) Dinochips MB6 3) vtec2011 MB3 4) rover5 MB4 5) ammarbm MB2 6) One4all MB3
    1 point
  18. nothings changed really since last month other than a rust repair so here it is again lets see what happens ( got my forts whos gona win tho ) build: http://civic5.com/forum/index.php?/topic/7565-my-honda-civic-15-ls/
    1 point
  19. I'll try with a wire or a thinner needle and see how it goes. Also purchased the 5L bottle so I'll refill once I've got the blockage sorted.
    1 point
  20. you really are part of the gang now, next you will have to misread whats typed and quote on what you thought it said and then you will def be one of us LOL
    1 point
  21. Yes, this is the price you have to pay to keep the lady in your life happy but new wheels.
    1 point
  22. Oh piss off lol. Must remember to proof read.
    1 point
  23. ye its a low down one i'm seeing it tomorrow. will pop up some pictures later on tonight when i get to work about 10:30 ish
    1 point
  24. Nice shot of ur pussy there chief hat (im sorry but it had too be said)lol!
    1 point
  25. LOL that is one of our six cats.. She is Holly Ouch our micro cat... Good luck tomorrow any probs someone should be online to help...
    1 point
  26. Oh yeah, when you take it off there is a metal shaped bar that is part of how it holds on.. Its nothing scary LOL it just sits over the studs on the rear of the grill.. Just note what way it sits when you take it off and you will be fine
    1 point
  27. LOL Scary !!!.. Its easy mate.. Love the grill, will look spot on once fitted..
    1 point
  28. Exactly, design from a 1950's tractor.
    1 point
  29. I just my hat when my knob gets too cold
    1 point
  30. Haha Simpo has one of them, i kept meaning to get one for winter, but all its done is rained!
    1 point
  31. Umm, well, I have to say it's a slight anti-climax but as long as you can keep your knob warm that's good.
    1 point
  32. +1 THAT I personally find it easier to sit the gasket in the rocker cover, a bit of sealant on cam cutouts then place the rocker cover on to the head.
    1 point
  33. should only need to use sealant in the corners where the cut outs are for the cams. the rest should be ok
    1 point
  34. Sure enough when holding the wheel at top and bottom and shaking it, there is a tiny amount of play. Just a bit, but noticable, compared to the other side. So i guess this is confirmed then! Thanx krzys.
    1 point
  35. Slowly, they're filled but I need to key the rear faces too, hopefully I'll get a good day on them Thursday.
    1 point
  36. Just realized I haven't made a proper list! Lowering - half done MGZS spoiler - done VTi-S skirts - done Steering wheel - done Front lower strut brace - done VTi / VTI-S interior - done Stuff to do this year with some big changes USDM light mod Engine dressing D16Y8 head-swap P28 ECU New head bolts, head-gasket, water pump etc etc K&N drop in panel filter 4-2-1 manifold or custom uneven length manifold Full custom cat-back system Front top strut brace Rear top strut brace Aaaaaaand,,, short shifter along with a new gear-knob
    1 point
  37. Nice one! If the paint was a bast**d to remove, that means it was properly prepped and resprayed before
    1 point
  38. Didn't realise what my odometer was at when I got home earlier. So of course I had to take it round the block. Milestone reached!
    1 point
  39. I would recomend a new gasket they're cheep enough thats i did wen i did mine but only use oem for peace of mind if anything
    1 point
  40. You're getting on with yours a lot quicker than me, I really should be out there now instead of in here.
    1 point
  41. I remember when Simpo had his, i went in in, Nice car but as people have said thirsty. Don't see too many about either!
    1 point
  42. The million dollar question is......did you let him join in!?
    1 point
×
×
  • Create New...