Leaderboard

Ok it will be going to vote tomorrow around 6pm

I'll tell ya in a bit just putting it all together

Dodo Juice Born To Be Mild is on its way, first step of getting car JapFest ready, I feel like the car won't look as good as the rest of the M's, or be as fast, but b****r me it can shine! Although it may not be shiny after the 3+ hour drive down in the morning!

Yeah she has changed quite a lot more just refining and tidying up plans now. Oh and enjoying it Haha best of luck, I have a pass and still get stopped 3 times trying to bloody get in there!! Indeedy, mostly for practical reasons. Three weeks of to and fro'ing from London, 2100 miles ish, I didn't want to do in the t1r's. Also gives me a good excuse to smother them with lacquer as I hadn't got round to it while they were on the car!

So, good news and bad news. The bad news is, the CREE bulbs I bought are too long for my fog lights and it's not really worth me sending them back to China. So I'm just going to keep them handy until the day I can find a use for them. The good news is... Bought it from Matty Reay on the Civic5 FB page. Really happy with the result. I was originally planning on colour coding the grill surround and rear boot trim but I've swayed towards going black now after seeing this on the car up close. I'm going to carbon wrap the badge though.

I was watching the original gone in 60 seconds the other night and spotted a few Jap cars. Datsun factory. Mazda showroom And a Mk1 Civic.

of course having three eyes is optional mate.. But it helps LOL

that's about the same for me I reckon - deffo did one side first and needed a bit of man-handling (steady Tom... )

the other day my knob had a cold, maybe I've to get one of these...

Sorted!

Just used a program which is a bit like Photoshop, thanks to Mr.Brown. Cheers maaate.. There are a few mistakes here and there but It's only a quick edit. This is defiantly going to be done! Oh yeah, I clean the engine today

How bad do you need leads? If it's not urgent if wait until you can afford the magnecor leads if that's what you want.

Nice, they should fit and have a little bit of poke too. 15's so you can wind the coil overs right down.

Sounds good ya. Growls

Like a ninja!!

Parking stealth and safe

Vinyl wrap it matte black, if you don't like it then paint it colour code. Dadoneeee.

Damn wish i knew this was parked in London, could of done with a few bits She looks sweet sitting in that corner all safe and sound....

Nice picture! Amazing how much your car has changed since you first got it!

Little hit of photo whoring, tucked away in the very furthest coroner of the London car park.

Need the extra eye in the back of my head to watch out for tom I think!! Ps, I love that film lol

My 16" fanblades will be getting winter/wet weather tyres fitted once they're the right colour!

Yes! Always spike it the night before!

Yes, they'll bolt straight up. The rear fork type is just the fitment at the base being a fork that fits over the lca as opposed to an eyelet fixing.

LOL it gets in most threads

Bought the set at Ebay for £ 24,00. And head smacking was one of the main reasons to get a new pair...!!!

I loved my MGZS shocks and springs plus ARB a brilliant upgrade for the price.

Motor works but like you I get no water! We blew an air line down it from under the bonnet and air does come out of the rear nozzle! But water doesn't make it that far, think my motor isn't working at its best! There's an access point top centre with the boot open to check the line mate!

Planting the seed with the failsafe on is the way to go! Or spike her morning tea/coffee with the morning after pill!

There's an MG set up in PaulVTi's for sale thread, you could get that for the shocks, one of the springs has snapped anyway! Then some lowering springs from somewhere else?

Nice grill! I see the famous red rug made it into here!

Sorry SWINES it should be then

Ok, stuff it. I just wanna see what people think. Build thread in sig Just dont hate on her too much, she's ace

1) powerofdreams' wife's MB2 2) Dinochips MB6 3) vtec2011 MB3 4) rover5 MB4 5) ammarbm MB2 6) One4all MB3

Nice knob hat thingy

Oh piss off lol. Must remember to proof read.

ye its a low down one i'm seeing it tomorrow. will pop up some pictures later on tonight when i get to work about 10:30 ish

Ha Ha bad luck mate, that will teach you going around planting seeds wiily nilly

No no! No it doesn't! Then you end up with this!!

Nice shot of ur pussy there chief hat (im sorry but it had too be said)lol!

Yeah i think i would be more than happy with that stance to be fair!! And a set of 205/45 17's are cheaper than my 195/55 15 tyres aswell! Win!! Ive planted the seed... I may have more of a chance than i thought of getting these before the fest!!! fingers crossed!!

Stop being so gay!

Harro, sucky sucky 5 dorrar?

Put it in Doug, your cars nice mate

Fair enough, I get where you're coming from, I know if I tried it I'd f*ck it up though.

I'll continue using it for work. The MB6 isn't replacing the MB3

New bits! These went in already: Except for the rotor, the screw was absolutely and utterly stuck! Will need some special moves to get it out. I've never changed the leads, rotor or the dizzy cap (had the car for 5 years now), so thought it was about time. Especially for the cap, the plastic cracked around where the screws go in when i removed it! I haven't given her a proper trashing yet to find out if the power curve has smoothed any as some people say Magnecors + quality plugs will do. And do you know what's cool? When the doorbell rings at 9 in the morning, and there's a courier with a big box and you haven't got slightest idea what he's hauling in until you open it and remember it's some tuning bits you ordered in the middle of the night a week earlier! Energy Suspension motor mount inserts (evil cat not included!). Hope these'll eliminate the massive wheel hop i get during quick launches. In addition, i've got a pretty good sum saved up for something big! MeisterR's? Complete new exhaust? New wheels? I also need a cam belt replacement soon so maybe new cams and gears and a tuning session...? So many options to waste my hard earned money on! Thank god for a proper hobby.