Jump to content

DAVEMB2

Administrators
 View Profile  See their activity

  • Posts

    3,727

  • Joined

  • Last visited

  • Days Won

    6

 Content Type 

Everything posted by DAVEMB2

  1. DAVEMB2
    Nice Simon who needs air con and save a bit of space under the bonnet too
  2. DAVEMB2
    Looks sweet jake
  3. DAVEMB2
    Yer I have them on trin2 there better than the things that are on the M lol
  4. DAVEMB2
    It's not ob2 if its a late model it may have ob2 socket if it has its in the centre console where the air comes out for your feet . But it's more likely to be the 2pin and a 5pin on the pass side near glove box take box out and you should see the 2 plugs hanging on the side of the car .
  5. DAVEMB2
    Looking good yer and you can not bet mister jets
  6. DAVEMB2
    Thank you all for the kind words , after what had happened to her I said I would make her into one of the best MB2s around .and I had lost lots of money on her and trashed .so if it was to take a few years then so be it she could not go the scrap yard in the sky . The only downside to this is that a few people never got to see her finished . My grandad and my gran both passed way after She had gone and been trashed they never got to see my pride and joy as she is now . And crazy dawn who never got to see her or know what I had done . So to those 3 this build is for you R.I.P Not long till she comes out of her hiding place lol. A few more things to do and start building back up o and one new special thing to come toooooooo Thanks agin for the kind words :)
  7. DAVEMB2
    That's nice and diff
  8. DAVEMB2
    Well one of the pain things on the M for me was the scuttle panel it always fades or never back to blacks well ( well it does on both my Ms anyway lol) SO LETS GO SORT IT :) AND HERE WE HAVE IT CAN WAX IT NOW :) :) :) O and what about in the boot. WELL LETS DO IT JOBS A GOOD UN Lol
  9. DAVEMB2
    They should it will prob be the back mount that will need to be modded a little , Remember a k swap will cost and there is a lot to do and things can and will prob after to be custom and the cost can go up as you doing it and up , and for half the cost you could do a very nice blown engine That said ( just letting you before you do ) if you want to do one go for it
  10. DAVEMB2
    Ok so I have a fair bit of carbon mmm nice well I need just a little change in the car to break carbon up :) lol so holy cow look what I did I went like this for glove box and the little box on driver side .. Just gives it that bit diff some may like it others may not lol but it's diff Hope you like them more stuff to come not just in carbon outside and in and under bonnet to and she will be done ( will never done lol)
  11. DAVEMB2
    We not sure these where the only thing that was left in my car when it was trashed ,and we had to custom them just to sit the engine at the right angle .
  12. DAVEMB2

    ECU maps

    DAVEMB2 replied to JasonV's topic in Chat Lounge

    Not that I know of , the ecu is not mappable and in standard trim with all the bolt on mods you not going to get any more than 105 bhp ( i would say do not hold me to that fig lol) .without going to town on the engine or blowing it , turbo or supercharge
  13. DAVEMB2
    Always make a big diff when you have done it ,it's all the little bits that give the M that mmmmmm
  14. DAVEMB2
    Just more pics for you to have a look at ,dam cold weather things not drying that well so day is taking long and not getting much done arrrr Anyway here some more bits done Bit more in engine Just waiting for a few bits to dry before I can fit anymore bits so that's a bit of a pain but never mind
  15. DAVEMB2
    Nice work I have just done all this to trinityD and putting it back all custom . Best way to give it a good clean
  16. DAVEMB2
    Get a pop up shelter then you can crack on mmm maybe a bit cold
  17. DAVEMB2
  18. DAVEMB2
    Ok for all who need to see the front M speakers and size this is just to help out . Here is a speaker with the spacer it sit in hope this helps What the speaker sit on ,in The speaker The inner hole dai is 12.5cm Hope this helps
  19. DAVEMB2
    Thanks guys
  20. DAVEMB2
    Lol loll lol lol you telling me jake
  21. DAVEMB2
    Ok built my door cards up with the new trim and carbon
  22. DAVEMB2
    God makes mine look like a hut lol I do not have room to move around a car never mind 2
  23. DAVEMB2
    No not dipping them myself I have a few more bits being done so its when I get them I pop them up seat are now in and most of my purple bits in engine are in too
  24. DAVEMB2
    Looking nice jake and that's some good wrapping mmm already for a blow (lol not like that all you Pervs)
  25. DAVEMB2
    Ok poll has closed Well done ollie91 c.o.t.m sep
×
×
  • Create New...