Jump to content

NIKH25

Civic5 Supporter
  • Posts

    11,678
  • Joined

  • Last visited

  • Days Won

    67

Everything posted by NIKH25

  1. Interesting, have you noticed any difference?
  2. The only thing I can think you might need is spigot rings depending on the centre bore size. Mine's lowered a fair bit (75mm on the front, 60mm on the rear) and have no trouble with my 16's rubbing, et45.
  3. Japan Racing JR7 et40. http://www.srbpower.com/products/JAPAN-RACING-JR7-16X7--ET40--4x100%7B47%7D114%2C3--Gloss-Black.html
  4. I've found some Enkei RPF1's with et43, so should be fine without any camber or arch work. http://www.srbpower.com/products/ENKEI-WHEELS-%252d-RPF1-16x7--4x114.3--ET43--Silver-Paint.html I'd think you'd be fine up to et35 as you're not too low, 15's would give you more scope and 17's you'll probably need arch work.
  5. http://civic5.com/forum/index.php?/topic/8280-rear-calipers/?hl=%2Brear+%2Bcalipers
  6. NIKH25

    ride hight

    Stock height from wheel arch to ground is 650mm if that helps.
  7. Just a whole load of granny porn.
  8. Well there is that but it's not what I was thinking of.
  9. Good one, the most ironically named car in history.
  10. Sometimes my level is a good place to be.
  11. There'd be nobody left on here.
  12. Yes, that was very good, especially watching the relationship between Matt Neal and Jason Plato develop into something special. Also interesting that the 850 estates were only used for 1 season but everybody thinks it was much longer, serious impact. On the good old PS1.
  13. Excellent, I always wanted one of those.
  14. Yes it would but could also lead to suicide.
  15. K&N at the moment ITR box on the ever lengthening shopping list.
  16. NIKH25

    ABS Light??

    Download an OBD2 code reader.
  17. this car, cracking job on the steering wheel, did you do it yourself?
×
×
  • Create New...