All Activity

Hello Dave, thanks for your reply. I don't want to add CC on my civic. I want to use the CC steering wheel switch and through the cable reel to add radio controls. I did it on my last EK civic with success, but I have to know if there is a CC switch that matches on ma9 steering wheel, and of course if there is a cable reel with CC. If not, is it possible to retrofit the cable reel and terminate 2 extra wires?

Hi Dave, thank you so much for your help. It was really helpful 😀 I don't know what you mean about "R reg" but those photos were just examples of the parts I am looking for, not the actual car. What should be considered as "the later ones"? 🙂 The dash trims from the previous photo are the correct for a VTiS already? If that's the case, I would probably leave them as they are, I don't have any special preference for the fake carbon. From the remaining additions you listed, I will try to find the badge, the mats and the rear mid spoiler. The wheels and the gear knob I'll want something different, but it will already be close to an original VTiS with the remaining parts. As for the VTiS boot badge, I would be appreciated if you can let it got. Just ping me again if we are interested, please 👍

Not sure mate as original poster never updated this to say whether its possible. I'm thinking that it might be possible to retrofit it using parts from an accord of similar age, but not 100% sure on that. Know that I looked into trying to retro fit it to my 1st gen mini Cooper S, as some had it, some didn't, but it was a major job. That might be partly due to them running canbus though, which is a pain in the backside! Might be easier on our civics.

Only just saw this! Not sure how they managed to post without tags as it doesn't allow posting without them. I'll need to have a look at this and check the settings.

Yes, separate fan for aircon mate. Check the fuse gor the aircon hasn't blown, and I think there might be a relay for it too so worth a check. The aircon in these was decent, so should be nice and cold.

Hi mate. Yours being an R reg it has the correct dash trims for a VTiS already. The later ones had the fake carbon. List of additions the VTiS had are VTiS mats VTiS alloy gear knobhead with VTiS logo engraved onto it. (later ones had leather/silver plastic one with VTiS logo on it.) VTiS full lip kit and side skirts. VTiS rear mid spoiler (Aerodecks only, was also available in the accessories catalogue for standard Aerodecks) 15 inch VTiS alloys (Speedline Chrono for the early ones, fan blades for the later ones) All had pirates black mica paintwork, no other colour available. Think that's all the stuff they had. I've got the VTiS boot badge jn my garage, will need to have a think before deciding if I can let it go as they are rare as hens teeth now. Will get back to you on that one 😉

Wow, this is coming along nicely! Looks like that engine has been in there from the factory, really nice install that mate! Loving the wheels, think they'll look superb on it. What a cracking build to follow!

Nice one. I bet it's raucous without the exhaust 😂

Yeah fingers crossed I'll get to have a quick spin in it, the plan is once the wheels and tyres are on, better front brakes fitted, and a few other small bits are sorted I can take it for an exhaust at least as somewhat of a test drive. Hoping to avoid the cost of getting it delivered there as we don't have a suitable tow car unfortunately. The car came with 12 months MOT when I bought it so we have a bit of time.. technically I am sure it's not valid any more as no exhaust is a fail but just to avoid getting in trouble (hopefully)... that is the next priority item as starting the car up is really antisocial at the moment for the neighbours! The car does run and drive but I've literally only been up and down the driveway in it so far 😂 but nothing flew off/leaked out of it yet so that's good progress... It still needs a proper map on the ECU and there's still a whole bunch of other work to do on the suspension and then safety gear inside (half cage, seats, harnesses, etc) but we can sort that over the winter and be fully ready for a show/track day in spring. To be honest that is all fairly straightforward fitment wise and more about saving up the money to buy everything than actually fitting it that will take time!

Those wheels look nice mate, should look good. Screen wash bottle doesn't look of place at all.. Handy to know. Do you think you'll get on the road before winter sets in (and the salt comes out)?

Been chipping away at jobs the last few weeks and should be ready to drive soon. Everything in the engine bay should be done now - had a quick tidy up any loose pipes/wires and made sure everything was bolted down securely. It's not a super tucked show car but I think it's neat and tidy enough for the type of build that it is. Plus everything is easily accessible for servicing! Fitted a small washer fluid bottle - £10 from Amazon so it's a bit cheap and cheerful but it connected straight onto the factory washer pump connector and lines! Removed the rear washer pipe as we've already removed the rear wiper. The Hybrid Racing cold air intake bolts into where the factory washer bottle sits so it had to go. Picked up a set of Enkei RP01 (15x7 ET35) wheels for a reasonable price (about the same as i'd pay for a set of Rotas or similar). Will get some tyres on them this week and see how they look on the car. The main thing is they fit fine over the MG ZS front callipers with plenty of room to spare. I wasn't sure they would initially as the ZS came on 16s, although admittedly with much less offset. They've been rattle canned by the previous owner but honestly he (or she) has really not done a bad job at all. Initially I was looking to change the colour but for now they will do as is, for now I'd rather spend money on getting the car working than cosmetics!

Hello everyone, I am trying to convert my Aerodeck MC2 VTI to a "replica" VTI-S, as close as possible to an original one 😁 I already have some exterior parts, front/rear lips and side skirts. The fanblade rims and the aluminium gear knob, I'll replace for something different, because I don't really like those. Although, I am still missing a VTI-S rear badge, the original mats and the rear mid spoiler. Does anyone know where I can find these? Or someone willing to sell them? Any other important differences from a VTI that I should consider? 🤔 All MC2 VTI-S versions were released with fake carbon dash trims or only marble? This is the dash trims I have right now, are these similar to the ones available in VTI-S versions? Thanks for your help! 👍

Haha, totally agree! For the extra cost per tank, the mpg and performance more than make up for it! 🤓

That E10 is absolute dog turd.. Only e5 goes in ours, especially after it ruined the injectors in Karen's accord. It's like a double bonus of super unleaded in top of not being E10 👌

Yeah, all sorted and driving amazing. Had been using that E10 unleaded fuel for a bit, but yesterday filled her up with E5 Esso super and the difference is unreal. She normally averages around 44 to 47mpg on that. On the E5, she's showing 53mpg (know that will probs go down a bit)! What got me was acceleration. On our way back from town 50/60mph limit, we got stuck behind a numpty who was slowing down to 26mph for 45mph bends! Gayle was in Foxy, her wee 70 late Micra, and pulled out and passed him on a bit where there's a very short straight. Knowing I'd need to be quick I dropped her into 2nd as normal and went for it. She accelerated so quick I hit the limiter in 2nd and had to quickly change up to 3rd! She doesn't usually accelerate that quick! E5 deffo makes a difference! So happy, got a car I always look back at when walking away, which I love the look of, it's quick and cheap as chips to run! All is good in Lexy's world! Bloody love this car!

Will have to have a spy at that 👍

It's mega tight mate. If you take the glovebox out you'll see that wee space I was on about. You might be able to cut some of it away (it's all plastic I think) to get all the cables through.

Deffo mate, been ages again lol Wish I'd got my finger out this year as DD was invited to a classic car show at BoNess, although we would have been away on hols anyways. She's already invited fir next year's show though which is nice. My good mate Iain volunteers to work on steam trains and some of the guys there are the organisers of the show. He told them about DD and they want her up there at the next show. 🙂

Nice one matey, I like Kelso 👍 We'll have to get together after winter.. Give you some time to get that deck back in the road 😉

Moving to Kelso in the borders mate, it's about 20 odd mile from here, nit too far but further into the borders. Closer to your direction lol. The village has been fine but the land with this house is too much to maintain, so bought a lovely detached bungalow with garage and a lot smaller garden. Will give us a lot more free time, and Kelso is our favourite borders town. Plenty to do there, plus it gets its fair share of classic car shows too along at the events ground. Win win!

All looking good, and glad you got the shifter problem sussed. My head unit just won't fit in with all the various plugs and adapters connected to it... Such a small space

Know the feeling about being lazy, 😂 Are you moving far bud?

Nice one. Sounds like the nightmare I had swapping the wheels on the stepwagon before going away.. Was supposed to be quick, but resulted in a snapped wheel stud, and replacing what could well have been the original brake pads given how they almost fell to bits.. Took bloody hours. Is she back sorted now mate?

I still love the go kart deck, but we've just done 100 miles out so round Cornwall in the stepwagon in the summer and it was spot on for comfort. Karen's civic is quite nice as a daily though.

Thanks, it's an alpine unit so even though it's new I think it fits with the 90s-ish vibe of the car. It's no doubt the brand I would've gone for if I had the money back in the day haha. It has RGB lighting so I can change it to march the dash which is nice (I'm being picky but I don't like it when the colours don't match!) The car came with a pretty retro looking JVC CD player but only 1 channel was working for some reason and it had a really shoddy aftermarket Bluetooth kit (calls only) with wires bodged in all over the place so I thought it was best to bin it all and fit something new I did consider not bothering with a head unit but even though the build leans towards track car, I've been in cars which are totally stripped before and whilst you might be able to get an extra 20kg out by removing the heater, stereo, half the dash, etc, it makes the car unusable for anything other than trailering really Yes he basically said he managed to get it all down the side by sticking a pair of long noise pliers through the popped out hazard switch and holding the cables out of the way of the head unit I've stripped everything from the front seats back and deleted the air con (it was broken anyway) so I'm not even sure I'll be able to hear the radio over the rattling but that's about the extent of the weight reduction for now. It should be a lightweight chassis anyway as it doesn't have a sunroof or other luxury features 😂