Chandler
-
Posts
9,832 -
Joined
-
Last visited
-
Days Won
177
Content Type
Store
Calendar
Forums
Gallery
Downloads
Everything posted by Chandler
-
they sent you 5? i only replaced 2. the input shaft bearings. get some more pics up if you can of what you got. i dont know if i took any pics of when i done mine @m0l0t0v
-
Ye I bet mate. You replacing the seals etc aswel?
-
Ye I bet ha ha. It's not too bad once you get it out though mate
-
I removed that bolt with the spring when I did mine. It's fiddly putting it back together that part but it worked for me. I literally undone every bolt ha ha
-
Where that spring is on the inside. There is a bolt on the outer bit. You also got to remove all 3 shafts at the same time. Not just one at a time
-
That bit basically needs to move up and round. Have you removed the bolt that keeps that in place? Have you tried to move the linkage in and out etc as it needs to be wiggled a bit.
-
that a Bseries or D series? there should be some bolts on the outisde of the tranny. take them out and be careful as there are ball bearings in there. also have a look on the inside of the housing and see if there is an Allen key bolt. if there is a big allen key bolt you need to remove that. have a read through this mate! http://www.honda-acura.net/forums/do-it-yourself/284236-diy-transmission-rebuild-89pics.html
-
sounds good @Finch
-
don't know when it'll be though man. i plan on getting the new engine in end of feb. then it'll be a month or so after i might end up parting with it just in case something goes wrong with this one
-
sweet! i'm also getting AEM COP aswel more money but ah well
-
ha ha well i'm going a different route and have been advised/told to go AEM. ok mate i'll see how everything comes along and we can make a deal
-
whole engine? i'm getting AEM management for my build
-
ok mate. i'll get the engine in and go from there. that sounds familiar that date
-
@Finch have you got me on fb? if not add me. Alex Chandlervich whats the date?
-
must be the amount of time he makes an appearance on here- 36 replies
-
- 1
-
-
- honda
- honda civic ma
- (and 5 more)
-
seems like your santa as you only really appear once or twice a year
- 36 replies
-
- 1
-
-
- honda
- honda civic ma
- (and 5 more)
-
and @Dave has finally made an appearance
-
looking good mate. Renault espace usually a laguna splitter fits anything
-
looks good mate
-
fair play mate! while its out you might aswel wire tuck the bay...... if you haven't already
-
I had 15x7 et40 I think they were a few years ago and had no problems
-
can you change my pic please @Dave
-
It's been a while. Here's some photos my mate took
- 3,106 replies
-
- 2
-
-
- honda civic aerodeck
- civic
- (and 5 more)