Leaderboard
Popular Content
Showing content with the highest reputation on 05/14/2014 in all areas
-
Thanks for your help lads but I have already arranged to pick up car this weekend! It is a Black Aerodeck 1.5 or £350! :D I am super excited!!! Taxed and MOT'd, has got 170'000 miles on the clock but I obviously got another engine if this ones knackered... despite that, I am over the moon!4 points
-
Some prep has began to repair the front end.. The panels i bought were titan silver so i thought it would be quick but i was wrong, the front bumper is too scruffy for me so i will have to sort that (no pictures yet) The two wings were disappointing one was rather scratched up and the other got ruined by the courier firm who lost it at first then delivered the next day and when i unwrapped it was very dented all over.. So the scratched up wing i have been working on with the G3 and gave it a polish and im happy (ish) with the results May try again on this scratch might be able to hide it This one is a bit deep to hide Only small but annoying anyway The worst one, look worse than the picture shows And this one Still looks okay i guess As i said the drivers side was so dented i have left that to the side for now and have decided to refurb a blue one with no dents but was very scratched.. This is how far i got Will get some primer on it hopefully tomorrow and see how it looks...3 points
-
3 points
-
Yeah you and will have a chat on Saturday mate Cheers Kyfer! Sure you'll get it up to scratch !! I've got a spare b18 that I might sell2 points
-
Looks beautiful in that photo above. I really wish I seen this car... Oh yes, you might have a mini-me twin2 points
-
I couldn't take driving that wreck any longer! So I saw a mini-me version of Grant's Deck and thought... I MUST HAVE IT! I have to travel all the way from Cornwall to Leiceshire to pick it up but I always like a good road trip2 points
-
2 points
-
Nice photo! Sounds like you had a good day! How much was the tuition? It's something I think is very worth while getting!2 points
-
Got to do a track day on Monday in an MB6, same one in as in the June issue of Japanese performance. This has really pushed me into wanting mine finished so I'm working with a local engine builder in the evenings and the weekends will be on the car from now on! I had a few laps tuition and drove in both the dry and pouring rain. Car had a few mods and a lot of lightning and was awesome in the wet, pretty good in the dry (just lacked power). The instructor was able to keep up with much more powerful cars on circuit by carrying so much corner speed but he's driven the circuit 1000's of times so should know where all the bends are by now! I'm waiting on a new ECU and some bits before I finalise the wiring and seal it in trunking so moving onto the fuel system this weekend. Doing a well organised track day is well worth trying. You get to see what your car can do in a controlled environment, and the company I went with did 20 minute tuition sessions which really help most people there on the day2 points
-
2 points
-
2 points
-
It is indeed a big suprise lol. Has inspired me to take my car in and get my VTi-S kit sprayed. It had been lying around the house for 2 months haha2 points
-
We've had it, all these subtle surprises for us to spot, it's like a woman asking if we can see something different because she's had her hair cut by 1mm2 points
-
So I need to stop being lazy and update my thread with all the changes I did before and after japfest First of all the number plate surround. Fitted 6 screws and its solid as a rock now1 point
-
I love the full silver colour coded look mate. Always wanted to do that. Hopefully some more pics will help change your mind1 point
-
Found you at jf lol thanks been a lot of love for her amazing just trying to think of new ideas all the time haha No blanking the plates for me then I'm a night time boy racer hahahaha1 point
-
Love the performance out of the mtec's my only gripe is I didn't get the black coated ones and they're lookin pretty browny orange already.1 point
-
1 point
-
Shame about how they've arrived but good work so far!1 point
-
Shame about the dents Mr Brown. Hopefully your repair work will turn out good1 point
-
I found where the drain plug is in the wheel well of the MB3. Since it was underwater I couldn't pry it open, so I poked it through the hole thinking it'd drop under the car. Noooope. Now my MB3 will just drain itself whenever the wheel well gets flooded.1 point
-
Cheers mate, those discs look similar to the black diamond ones I had on my prelude. I'll have a proper read up on them when I'm not at work. My dad's just put some ebc ultimax on his ep3 and they look sweet but they don't do any for our civics.1 point
-
They will be ready to send out start of next week. Just waiting on connectors now.1 point
-
I think there are a few brands that people use and they seem to be ok with .. Me personally, only ever used Honda MTF.. And would probably be worth doing now .. Only £36 for enough to do it .. Plus you'll only need 2 litres next time, so only £24 on your next change!1 point
-
1 point
-
1 point
-
Yeah I think it was kink who's didn't fit and routed a different way I'll get you a link now they were of eBay and they don't come with sliders just new boots for the old ones, plus out of the 40 I paid 15 of it is surcharge so could get it back if I sent them back to them Dosnt look worth it see how much the postage will cost me I'll keep them and rebuild them as nessasary, I've give the lines to the mech and told him they may not fit but if they fit and there room for my wheels to turn without any pressure on them then to just fit them1 point
-
Absolutely stunning and no mistake, shame about the mid-spoiler but you'll sort it.1 point
-
1 point
-
1 point
-
1 point
-
1 point
-
1 point
-
1 point
-
1 point
-
1 point
-
LOL all that stuff was meant to be his japfest surprise and you never noticed and he had to tell me as well as i did not realize, soo many M's and owners to rememeber we don't stand a chance LOL1 point
-
Lots of details have escaped me about the day! I blame the out of date sig!1 point
-
No mate he sprayed it silver see And the mouldings his mrs redone them in silver carbon wrap and it has jetwashers LOL1 point
-
So this update was ment to happen before japfest but in the end I ran out of time. so have changed a couple things on my mb only small stuff but still cool. Starting with the plastic bit bellow the windscreen. I decided to pull off the matt faded black version and replace it with one I had sprayed in 2 packed black. old version: new version: small mod but nice Next mod is my side skirts, Thanks to my good friend Adam RHD i got another set of vti skirts which I wanted to spray body colour to test the look. out with the old in with the new. car looks like this now and the last simple mod is. the classic JDM rear light mod which i love and from that japfest happened and it was awsomeeeeeee!! so i will end this update with a nice photo of my M from the day.1 point
-
Had a turbo mr2 last time. Was very quick, but a lot of hassle. Had a lot of things go wrong with it. But I'm going for probs a very clean 99 n/a one and then the turbos just bolt on to them so do that. And make sure everything's done right. When I get it il stick it up on the forum. Never leave this forum, you guys are just to nice1 point
-
I noticed from the pictures on Facebook that the car has silver VTi-S kit, colour coded mouldings and MB6 bumper with silver head light washers. Have you had the car resprayed?1 point
-
I'd had all the jokes & comments. All I can say is it's a great knob to grasp hold of and the extra size definitely better... - On my way home today from work... Seeing it roll over to 100,000 made me more excited than it has any right to! Heres to much, much more added on top of that!1 point
-
1 point
-
Car looks awesome hopefully get mine up to your standard do you know where to get side skirts for our mb2's?1 point
-
1 point