Search the Community
Showing results for tags 'Honda Civic 5 door hatch'.
-
Version 1.0.0
89 downloads
How to change your pollen filter. -
Version 2.0.0
169 downloads
How to find ABS fault codes. Has your ABS light came on and won't go off? Your ABS system has a fault! Use this D.I.Y guide to read the fault code so you can repair it yourself. Saves you pounds on garage bills! The guide is a Word document and printable, with full colour photos so you can have it next to you whilst carrying out the work.- 1 review
-
- 1
-
-
- honda civic aerodeck
- how to diy guide
- (and 4 more)
-
got these yesterday & pair of tweeters that fit by door mirrors total of £30. One of headlights on car has broken bracket so bodged with wire at the moment. Took ages to get through the sticky stuff, might do the other one later, used toothpaste, T-cut and Brasso on lenses but Autosol worked best. Brought back memories of having chrome bumpers! Got the other two Fox wheels fitted today - thankfully none of that set were buckled. Found a guy in Ilford Essex that breaks just Hondas from his home, right little treasure trove. That's where I sourced the lights & tweeters. He was impressed with back of the car - no rust, at least it has a good rear end lol. Got some bolts to try sort front bumper for now, little bit skint til payday. Couldn't get door latch to budge when tried to take off door card earlier. Unscrewed it pushed it to one side but it would not come off. Is there some trick I'm missing? Started day with a little snow now we have rain so messing around with the car will have to wait til after I've done my next 4x12hr shifts.
-
Version 1.0.0
10 downloads
Arty studio shot of an MB6 with our logo below. Click on the screenshot to see bigger image. -
Version 1.0.0
8 downloads
Our second screen saver, featuring a Honda Civic MB6 on the road. Click on the screenshot to see bigger image. -
Ruby's engine bay with custom rocker cover etc© Copyright Civic5.com 2009 - 2016
-
- 1
-
-
- honda civic mb6
- vtec
- (and 1 more)
-
Ruby looking good!© Copyright Civic5.com 2009 - 2016
-
Hi everyone it's been about a week or so since I joined Civic5 so thought it was about time that I started a build thread. The Mb's been in my family since new and has been kept standard and well pampered it's whole life but after 16 years could be doing with a few upgrades so it can keep up with its modern day counterparts. Apart from a ABS sensor, couple of saggy doorcard fabrics and some lacquer peel on the spoiler its pretty much straight onto upgrades. Once I've got my Impreza out the garage and back on the road at the end of the month the civic will be going in and getting stripped down/rebuilt. Main focus is going to be on the suspension/brakes as at the moment they can only be described as tragic! Had originally planned on a ATR spoiler and Accord sport wheels but decided I'm going with something completely different now. Anyway enough talking here's some pics....... First job is to definitely sort out the tailgate!
-
.thumb.JPG.ce004f0deba5497b0ae30a76b4fb0902.JPG)
Version 1.0.0
0 downloads
Our popular desktop 3, featuring a dark backdrop with the Civic5 logo in the middle . This download contains three sizes in a zipped file; Size 1: 800 x 449 Size 2: 1024 x 575 Size 3: 1366 x 768 -
.thumb.JPG.3dd5f38ccf96bdc743a9a7d1d71a9c4f.JPG)
Version 1.0.0
3 downloads
Our popular desktop 2, featuring an arty on the road shot of a Honda Civic 1.8 VTi MB6. This download contains three sizes in a zipped file; Size 1: 800 x 449 Size 2: 1024 x 575 Size 3: 1366 x 768 -
.thumb.JPG.d38bfa062a4530382c0f254ec952a0cf.JPG)
Version 1.0.0
5 downloads
Our popular desktop 1, featuring an arty studio shot of a Honda Civic 1.8 VTi MB6. This download contains three sizes in a zipped file; Size 1: 800 x 449 Size 2: 1024 x 575 Size 3: 1366 x 768 -
Couple pics, not much done so far, service bits, aerial, radio, two sets alloys. Think gonna go with the Fox ones (ones on rear). Need to get bonnet and bumper looking more straight next.
-
I've noticed at night time some of my switches don't light up does anyone know what type of twist fit bulbs i need to find/order to replace them?? ones i know are out are clock, mirror adj, headlight adj
-
Does anyone by any chance know where I could get rear trailing arm bushes? mine look a bit old and everytime someone sits in the back something squeeks over bumps? so I'm looking for bushes that will last long or could be polybush ones I'm not fussy. cheers! (civic mb6)
-
I'm needing a abs sensor and have found a aero being broken close to me but I need to know if there's any difference between the abs sensors on the rear of a aero and hatch? Ie does the aero having longer wiring? Cheers.
- 3 replies
-
- 1
-
-
- Honda Civic MB
- Honda Civic 5 door hatch
- (and 2 more)
-
As title, what's the best Ecu for a standard b18c4 with full stainless exhaust system
-
hi all, looking to make the honda a tad stiffer (insert p***s jokes) ive fitted zs 180 shocks and springs, much better, but for instance, when i push/rock the car side to side i feel it wobbles too much. whats recomended? il be using the car for road rallies, so a mix of rough forest/farm tracks and country lanes
-
Will they stuck out from fenders/arches? They are already rolled and pulled by previous owner. I don't wan't any camber adjustments. Bad for tires, wallet and winter conditions. Previous owner had Japan Racing JR3 wheels with et 20-22 in the back (17x9). Sure they stuck out lil bit but it was okay with stretched tires. I'm looking at these: http://www.nlmotoring.com/Avid-1-AV-12-Wheels-16x8-Gold-p/av121680ma25gd.htm 16x8 Offset [+25mm] (I would pick 15's but can't find those locally with 114 and et25 fitment). I wonder if such "deep dish" wheels fit MB6 without camber adjustments? I mean ET 25 should be manageable if those JR3's fitted, right? But does wheel design affect how much it actually comes outwards? I've seen some EK and EG Civics with those wheels and they struggle i guess. Looks good on those but MB6 have stock ET of 55 vs. other Civics 40-45. Fenders and arches are pulled out as much as they can i'd say. Does anyone here have experience on fitting similar style wheels on MB6 without camber adjustments? Does pulled fenders and mild stretched tires solve it? Another problem i fear is caliper clearance in the front... Bigger calipers than stock Civics. If it needs spacers bigger than 3mm. i think it's a "no go" then. Assuming they would fit, what tire profile would be the best? I have now stock 15's and lowered car pretty much in the same level as wheels (stanced/slammed some would possibly say ).
- 10 replies
-
- 1
-
-
- Honda Civic MB
- Honda Civic 5 door hatch
- (and 4 more)
-
Fairly new to these Civics. I know a lot about the Rover 400/45 and MG ZS so know they are good cars. Is the Civic VTI suspension different to the standard Civic (non VTI)? Stiffer? Lower? Is the VTI and 'VTI S' suspension the same? What about the Civic 'Sport'?
-
Had the MB6 for 5 days and already started getting few bits from my mate (he's a Honda breaker, and looks after me lol) he had an aerodeck vti in for breaking - got panels, lights, mirrors, front bumper, b-pipe - all for £10 each then today in a job lot he got - i got myself a set of evo 6 recaros ( he gonna throw in the seats out of the aerodeck for me to make seat frames) got them for £150 Then i also got some dc2 alloys (no tyres) in white for £50 so i got alot to do now lol - gota get the coilovers fitted, make some seatframes and sort the wheels out
- 13 replies
-
- 1
-
-
- Honda Civic MB
- Honda Civic 5 door hatch
- (and 3 more)
-
we did this once before here, as part of the MG ZS group buy of heated front screens. there is one last ever (I know I said the last time would be the last), and this really will be the last time as its not worth my time and hassle and I gain nothing from this...the last ever heated screen group buy the screens WILL come with a top tint, and are dual circuit heated. They are 25£ more than the last batch 5 years ago (inflation!) at £225+vat. its a real last minute thing coz I kinda forgot about you guys, but I have to place an order Monday 8th Feb and as before £100 deposit is required, non refundable as I would be stuck with the screen and I would still have to pay the balance, but if for any reason... find someone else to buy it, whatever, we just need to fulfil the order. Its done through Ricky Evans motorsport as before, they supply cars in the BTCC. They will not stock these screens, if they would I wouldn't have to go to all this hassle for nothing, so this really is the only way to get one, there will be none left over, what I order I have to pay for and you guys pay the same cost per screen as I do, we had to pay the tooling on the first batch, believe me, its no cheap process. Call me 07941 857777 or join teh dark side - MG ZS Owners club on facebook where there is a post, or prob better still, Jason simm on facebook, its the MGZS pic with the stelio pass in the background. Sorry its last minute, but I don't want to miss you guys out.
-
I am wanting to lower my MB6 ( hatchback ) i have read a few threads about different suspension that may fit finding exact fit springs/coilovers seems pricey or very limited are there any other model civics that will fit on with little or no mods needed ?? my mate brakes older civics eg ej ek etc so he has plenty parts - just need to know what i can use on the mb Thanx Gav
-
As title really does the b-pipe from a vti aerodeck fit the vti hatchback? Thanx
-
As you may already know, i have a MB2 1.4s. Unfortunately i'm not active on the forum as much as i'd like to be at the moment.... So to make up for it, here is my photo whoring thread of the bits and pieces i have done already Got a new Sony radio with usb/aux. Carbon wrapped plastic parts under the radio. (gonna do some more wrapping when i get a bit more confident) my colour scheme is gonna be Silver/Black/Red... More photos to come..
-
hi all, just sorned the civic for some much needed tlc. i have many plans for it, such as roll cage, bucket seats, lighten, blank sunroof, remove abs and ac, bake lines and fuel lines in car, hydraulic handbrake and maybe a few more.................. but, i want to freshen up the head, burns a bit of oil. do i need new head bolts or reuse old ones? anything i can do with the head off to gain a little? is there a how to guide somewhere on head rebuild/ torque setting etc ?
- 20 replies
-
- 1
-
-
- Honda Engine B18
- Civic
- (and 5 more)
