Search the Community
Showing results for tags 'Civic'.
-
so after my partners pug 106 quiksilver started have more problems then it was worth we sold it on. she wanted another civic as missed her ej9 and me having a civic didnt help. she wanted on bit bigger then the ej9 as kids now older so found a eu8 civic with 12 months mot and was in good shape. it was stock apart from some 17 inch alloys. i managed to find so ep3 type r bumpers and skirts cheap so got those. fitted front bumper and as rear bumper so to short for car i made plan to make rear lip fit. as the ep3 side skirt wasnt going fit and car already had side skirts i cut the end of the skirts off to extend rear lip. need fill join better but that be done in time. after more searching found so lowering springs, back box and projector headlights from a ep2 going cheap so had get them. once got took headlights apart and did inside black. fitted lowering spring and back box. we also debadged rear and wrapped chrome trim black and tinted rear lights. found a universal spoiler on ebay that looked like wud fit shape of car and was big enough for her. after abit i got some spray paint and painted rear lip and boot trim same colour as car. it little off but whole car needs deep clean. i picked up and carbon fiber exhuast tip as back box sat under bumper abit and didnt like that. finally then got the front bumper sprayed and put canards and splitter i made from spares and her owl fogs back in. few other bits car has is shark fin areil, rear bumper fins, wind deflectors and engine bay starting be sorted. still have few bits to sort
-
I bought a p73 ecu for my mb6 and the harness so it can go in. But is this really the best thing to use iv upgraded the cams to skunk 2 stage 1 cams exhaust manifold and inlet soon getting the s80 4.4 fd.Do i need to tune the car in order for everything to work properly or will this p73 ecu do the job.
-
I was watching the boy play gran turismo 7 a while ago, and took this snap of the ek9 interior so I could Google lens it. Seems that there is a double din option there. Would have been mint for the M to have had that as an option. Would also be cool to be able to mate the two together somehow (with lots of filler and probably flock or alcantara or something to hide the joins)
-
Hi guys, I'm looking into buying a HKB Boss for my Civic MB3 (1997). Does anyone have any information as to what boss will fit the spline for my specific model? I've seen a few people say it's the OH-206 DC2/EG boss but just want to make sure. Cheers
- 1 reply
-
- honda civic mb
- civic
-
(and 1 more)
Tagged with:
-
How cool is this little beauty.. 1982, 1 owner from new. http://www.autotrader.co.uk/car-details/202205115577041?atmobcid=soc3 Nowt to do with me, just saw it on auto trader.
-
Hello just wondering if someone can confirm the mb4 (d16w4) v mb6 (b18c4) I believe? Subframes are the same? Currently im aware the mb6 subframe is the same as the eg subframe minus the spacers? Only reason im asking this is because im currently building a k20 civic ek and an mb4 subframe has popped up locally and just wanting to know if that would fit my EK too? Any help appreciated as ive searched online and this forum may be my only hope! Thanks, Ryan
-
Hi. I need to replace the suspension of my MB2. I'm thinking of putting KONI Sport from an EK, because there's no KONI for MBs anymore, and I want something a little sportier for him. Do you know if it will work well on the MB chassis? I don't want to put coilovers, because in portugal it's illegal and my MB2 is my daily car.
- 10 replies
-
- 2
-
- honda civic 5 door hatch
- honda civic mb2
-
(and 3 more)
Tagged with:
-
- 1 comment
-
- 2
-
- honda civic mb
- honda
-
(and 2 more)
Tagged with:
-
-
- 1
-
- honda civic mb
- honda
-
(and 2 more)
Tagged with:
-
-
- 2
-
- honda civic mb
- honda
-
(and 2 more)
Tagged with:
-
-
- 1
-
- honda civic mb
- honda
-
(and 2 more)
Tagged with:
-
Hello Guys Just thought i would give you an update on the ol' MB6 Project. Ive been very busy as of recent sourcing panels for the restoration. Im very chuffed to find some Genuine Body panels including the Whole Upper sill and rear outer arch. Alongside that i have also sourced some Rear inner arch Extension panels where the Sills Meet the Wheel Arch. Unfortunately the Lower/Inner Sill section was no where to be found alongside the front outriggers but thats not an issue at all. i will be starting to Fabricate some New Lower/Inner Sill sections as if you don't know already the Civic MA/MB has Three Segments to the lower sill. The First part being the Front Jacking point section which starts at the sill then wraps itself round the front chassis legs and subframe mounts. Then there is the Middle section where the Front seatbelts are Anchored to. This section is Spot welded to the floor pan to create a sandwich effect (lovely rust trap btw). The Panel Itself is an L Shape as it also forms apart of the inner sill as its all one pressing. Thankfully the rust has not spread up into the vertical section of the panel as the rust has only ate away at the lower part probably due to all the water being trapped there. and Finally the Last segment being the Rear Sill Extension assembly which contains the rear jacking points and the Semi Trailing arm bush mounting. With Fabricating these lower segments it is pretty simple Its just a 90 Degree bend with a flange where the outer skin is spot welded to. With Rover at the time having a Partnership with Honda Luckily the 400 and 45 is the same car in terms of bodywork pretty much. Hence why i have bought Rover sills and Rover Inner Arches (they're probably cheaper too) and they will do the same job. Part Numbers if needed ALA120220 for the Side Panel (do note the side panel is a saloon not a hatchback as they are no longer available.) ALX140020 and ALX140030 for the Rear inner arches. The idea will be to chop the sill segment and rear arch segment off the genuine panel and to replace what is the rotten part on my Civic. With this i can maintain the original pressings of the panel such as the grommet holes. Hopefully in the New year i can get round to producing the Inner sill segments to be used.
- 64 replies
-
- 2
-
- honda civic mb
- general
-
(and 5 more)
Tagged with:
-
Civic Jordan alloys on Uniroyal Rainsport 5's.
sh4wzy posted a gallery image in Showcase Members Car Gallery
- 1 comment
-
- 4
-
- honda civic mb3
- civic
-
(and 1 more)
Tagged with:
-
Civic Jordan alloys on Uniroyal Rainsport 5's.
sh4wzy posted a gallery image in Showcase Members Car Gallery
- 3 comments
-
- 2
-
- honda civic mb3
- civic
-
(and 1 more)
Tagged with:
-
Hello everyone, I recently picked up some Civic Jordan alloys for my MB3 and got them refubished. I've checked the FAQ page for tyre sizes but I just wanted some clarification on weather or not 195/55/R15's would fit onto the MB3. Thank you.
- 4 replies
-
- honda civic mb
- civic
-
(and 1 more)
Tagged with:
-
-
- 3
-
- honda civic mb
- honda
-
(and 2 more)
Tagged with:
-
-
- honda civic mb
- honda
-
(and 2 more)
Tagged with:
-
Hello everyone, I see this pic today on FB and I'm crazy looking for this white rear lights, any know where I can find? Or maybe is a diy mod?
- 4 replies
-
- general
- honda civic ma
- (and 5 more)
-
processed-614cedb3-8c81-4e7d-ba3d-ee55caf74bd4_JCi3UrcB.jpeg
Silva10 posted a gallery image in Showcase Members Car Gallery
-
- 1
-
- honda civic mb
- honda
-
(and 2 more)
Tagged with:
-
processed-f7135686-26f7-4ca3-b0cd-55c682b83955_lANaztoX.jpeg
Silva10 posted a gallery image in Showcase Members Car Gallery
-
- honda civic mb
- honda
-
(and 2 more)
Tagged with:
-
Hello just wanted to ask if anyone has been working with placing electric exhaust flap (or valve ?) on mb3 body with stock like exhaust.
-
- 1 comment
-
- 3
-
- honda civic mb
- honda civic 5 door hatch
-
(and 1 more)
Tagged with:
-
Is there a rear seat that has a three point middle belt? I think I've seen one on a Google search but can anyone confirm? And would it fit into my 1999 model as I think these were put into the later models after 1999? Cheers.
- 2 replies
-
- civic
- honda civic aerodeck
-
(and 1 more)
Tagged with:
-
Hi everyone, I'm quite new here and I've just picked up my first ever 1997 Honda Civic today. I'm looking for some exhaust reccomendations because I'm not sure what fits and what doesn't. I'm not looking for anything crazy just something that makes the car sound a bit more fruity and looks good when sitting under the rear bumper arch. So far though the car runs and drives lovely absolutely chuffed with it. Cheers
- 3 replies
-
- 1
-
- honda civic mb
- honda civic 5 door hatch
-
(and 4 more)
Tagged with: