Jump to content

KiNK43

Moderators
 View Profile  See their activity

  • Posts

    7,310

  • Joined

  • Last visited

  • Days Won

    345

 Content Type 

Everything posted by KiNK43

  1. KiNK43
    Yeah the non aircon civics with half rad. Do come with a blank I did have one for my eg but it's been thrown away. Can't find it anywhere. But still having said that I've never had any issues like that without it. Sure it's not thermostat failing. Does take a long time to warm up in the first place?
  2. KiNK43
    I always find have the rears a bit harder than the fronts and understeer is gone. Like full hardness on the rear. And 4 clicks softer on front.
  3. KiNK43
    Rust in that spot is leaky windscreensville! That what killed my mb6. Looked mint. But rotted same place as that due to windscreen
  4. KiNK43
    Standard old jap car mate. There will be a seal not closing up properly somewhere. Door or boot possibly
  5. KiNK43
    Lots of possibilities really.
  6. KiNK43
    Driveshaft
  7. KiNK43
    Has he checked the droplinks and ball joints???
  8. KiNK43
    Good man. Sort that fooking deck out good and proper
  9. KiNK43
    No not good.
  10. KiNK43
    No way. change the pump and tensioner. Can't see any reason why there telling you that. There Moving parts prone to wear. Prices seem a bit steep as well.
  11. KiNK43
    Instant improvement. Looks real nice
  12. KiNK43
    Jeez
  13. KiNK43
    Could live with a little. The mounts I fitted on mine were stupid. Felt like id broke my car.
  14. KiNK43

    Still scraping...

    KiNK43 replied to Paulvti's topic in Chassis

    Probably the 205s dude. Like say I used to have same spec wheel. Rota circuit 8 16x7 et 40. But I had 195 45 16 tyres. No rubbing what so ever but the rears were very close so I'd imagine your 205s would be enough to scrape.
  15. KiNK43
    Err yeah. That's broke.
  16. KiNK43
    To be fair though. Driving on the minimum marker is hardly starved of oil. Still plenty in there.
  17. KiNK43
    Ohhh mate not cool. Sad times.
  18. KiNK43
    How are the mounts..? Sold mine couldn't deal with vibrations.
  19. KiNK43
    Oh my. I need a hose down!
  20. KiNK43
    Nah probably not. Think he's just saying suprised it works on stock p28. And curious about single vtec crossover. But that's normal.
  21. KiNK43
    The ones with either warning light. Or a peak function. @Chandler
  22. KiNK43
    Nice job dude. Looks great. So what's the plan with this??? Rebuilding the engine that failed??
  23. KiNK43
    Yeah p28 is from a d16z6. So single vtec at like 5k or something around there.
  24. KiNK43
    Not suprised after all that wire tucking and stuff you did jeez that looked knarly. @Chandler
  25. KiNK43
    Will mount boost sensor and possibly the oil pressure sensor on the bulkhead and run cables to there in some sort of conduit. I'm using a Sandwhich plate I baught for the oil sensors but pressure sensor is so big I think it will interfere with block or something else. So looking to connect it with a braided hose.
×
×
  • Create New...