Jump to content

Krzys

Civic5 Supporter
  • Posts

    10,000
  • Joined

  • Last visited

  • Days Won

    274

Everything posted by Krzys

  1. So at the weekend with the sun shining I spent an afternoon giving both Bob and Steve a good clean, here are Bob's photos.
  2. Finally at the third time of asking the balancing has been sorted properly, Amazing what you can do when you calibrate the machine
  3. Yeah exactly! It's like when you buy a car somebody else has modified. You never know what you're getting into.
  4. Krzys

    Head gasket

    I don't think you'll be able to seal it. You can get the coolant tested with a 'sniffer' which will confirm if the head gasket is going though.
  5. B16a or a2 head will be the one. If it's been done properly then you should be fine. By properly I mean the pistons should have been changed as the compression ratio when you just swap the head over will be wrong.
  6. Should easily get one from any good local motor factors mate.
  7. How it should be done, none of this overnighting bollocks
  8. Ugh, so had the tyres fitted the other day and then yesterday was the first time I got the car up to any decent kind of speed and the balancing was horrendous! Took it back and one of the fronts were 60g too much and a rear was just as bad! That's not all though, had all four balanced again and it's still not 4ucking right, useless cnuts!
  9. Did you fly to Brum or get driven down?
  10. As long as it was cheap dude! I can recommend an estate car but it's far from cheap to run
  11. About £85 a corner @Dave off the camskill website.
  12. Bob finally getting a much needed set of tyres! When I bought the Evo wheels last year they had 215/45 R17 Hankook's on which I didn't rate and certainly didn't like the stretch they had! But they had plenty of tread and I couldn't afford to just bin them at the time so I've waited until they've worn down to change them. I have gone for the Michellin Pilot Sport 4 as recommended on TRO in a 225/45 R17, they look much better on the wheels. I have only driven home from the tyre place, about a mile or so, so I can't comment on them just yet haha!
  13. V5 finally came back so I was able to send it straight off a week or so ago, now it has returned once again with my new reg.
  14. I'm still impressed that I managed to get JDM stalks working properly!
  15. Krzys

    My mb4

    That'll do the job nicely. Don't forget a heat gun, will help you along.
×
×
  • Create New...