noodels

Oh its catching there,you need adjustable camber arms,a wheel spacer would make it worse. or raise car a little

You have Different offset wheels,so would work well with spacers.

Not worth restoring tbh, take engine/box out and put it in a Integra R rolling chassis if you can find one So a re-shell is best option,the engine is the heart of the car.

I used these when i had no shim egay 231589276066 Brakesint may also have other parts like 233209507841

Would think all the same,only ones that are not the same are DC2 type R & EK9 type R

Time it up correctly and do a compression test.

No idea

FFS Tech | B-series Piston Check (ff-squad.com) gsr has little more CR than b18c4 <10:1 ?>so be about this below and would be better without the snail inlet manifold and p28 ecu,but try it maybe ok with 98ron gas,you need to know what you have also.. P73 JDM pistons in B18C w/GSR head CR=11.3-4ish P73 US pistons in B18C w/GSR head CR=10.8-9ish

Top mounts are same as an R and S2000

Did you look at any Bilstein Simon ?got them on my polo and stiffer damping than oem

Good idea but 75£ though.

yes

Would hold on tbh,Have a larger TB <spare from my S2000><also tried with fuel psi raised with a FPR & decat type R exhaust "B" pipe & a twin loop muffler Have a custom chip i got from USA and works ok for my use,9.6k rev limit? 5.2 vtec<same as DC2 anyway><had that on for 8+years><P28 Htune ecu> do have skunk2 tuner cams though. with OEM ECU VTEC is a joke with my mods<MOT time it goes on> PS Cox Honda have a sale on clutch ect.. pps Have 421 manifold also.DCsport i think edit>: 5200k secondary cam.

Long time ago My MC will be 23 soon,so i cleaned it today

No not the same as the green xpower ones,looks like they have just chopped a coil of and powder coated them

Very nice that MC2

Went to look at a 120D,nice cars but decided i still really need fwd for my daily. What is this?<vas is das>

Have one on mine,need to chop resonator and convert to cai

Nope not me

its a 1.6 honda Aerodeck from gov.uk reg

I have a small hole in a osf floor pan.

Cant polish a ?

Put a new type R teg B pipe on mine < only UK R will fit> as cats are different length. Not sure the rear silencer will fit..

That's why silver is my car options