Search the Community
Showing results for tags 'honda civic aerodeck'.
-
when getting the steering wheel grab the airbag/horn ring with all wires and the 4 screws for ring pink wire and white wire are not needed. green wire is horn . red/yellow wire and red wire are for airbag before staring disconnect battery t30 star key to take airbag off unplug airbag and horn and earth wire make shore steering wheel straight 19 mm socket to undo center nut and take column cover off 3 philips screws then there 3 philp screws holding on airbag/horn ring on honda horn wire is red join to mg green wire airbag honda yellow wire to mg red wire and honda green wire to mg red/yellow wire do not solder with airbag plugged in as the heat can set it off put mg airbag ring on column screw 4 philips in. plug wire in. put column cover back on. put steering wheel on. plug airbag and horn in all in and working and srs airbag light is off but dont no if it will work in a crash and i'm not gonna crash it to test that part this is a guide so you will bee doing this at your own risk
- 9 replies
-
- 4
-
- honda civic aerodeck
- honda civic mc1
- (and 5 more)
-
Need to replace leaking cam seal(s). Never done this before, so anything i should know in advance? I've got Hondabond and an accurate torque wrench. The rocker cover seal was replaced only half a year ago so i'm using the old one. I watched this video, looks pretty straightforward: In this one he only changes the exhaust side cam seal, and i've noticed some other people only change 1 cam seal as well when fixing a cam seal leak. My logic would say to replace both seals on the same go, but is this a) necessary and b ) possible without removing the distributor? I'm not even 100% sure if i've got leaks on both seals or only the exhaust side, it's hard to tell with all the bits in the way and oil spreading around engine.
- 9 replies
-
- honda engine b18
- honda civic mc2
-
(and 1 more)
Tagged with:
-
work i done on the first week of owning car new front caliper and painted fixing door lock put my rover 400 alloy on look better that the 13" still wheels painted grill black
- 6 replies
-
- 2
-
- honda civic mc
- honda civic aerodeck
-
(and 1 more)
Tagged with:
-
Sadly, the Deck doesn't get a mention : http://retrorides.proboards.com/thread/190984/load-luggers-parts-haulers-esp
-
Hi guys, swapped my mb6 for a aerodeck a couple of weeks ago. Needed the extra boot space. The deck isn't in as good condition as the mb6 but I'm slowly working through the faults etc. First of all I replaced the two rear tyres with some new toyos, and just yesterday fitted my hks 4-1 manifold with 2.5" collector, 2.5" decat and then I made a custom 2.5" b pipe leading to an apexi back box. I'm going to band some steelies for it, get a rear anti roll bar and replace the worn bushes and underseal it. Going to be on the lookout for a car at the local scrappies in the same colour as a lot of the panels have been keyed but I'm loving being back in a deck.
-
right anyone wanting poly bushes but don't want to get raped for em. use http://www.strongflexuk.co.uk/ they usually take about a week to arrive but are good quality and cheaper than most other places! they also have a category for our cars!!
- 2 replies
-
- honda civic ma
- honda civic mb
- (and 7 more)
-
Need some help , I understand my aerodeck currently sits upon the mg zs suspension setup , however I want to replace but not lose the ride height , will a coilover set provide me with at least this ride height (with a firmer setup) or am I going to need to look elsewhere ? I know it sounds silly but im confused.
- 5 replies
-
- honda civic mc
- honda civic aerodeck
-
(and 2 more)
Tagged with:
-
Here is my 200,000 mile 1.5 aerodeck had it 4 months so far
-
Morning all, I've been in touch with the suppliers of these fiberglass body parts to ask about some wings. They don't do them for ms, but I asked how many they would need to make it worth while. He said for a special order they'd be wanting 7-10 pairs @ £190 per pair, plus delivery. This is their ebay listing for egs... http://m.ebay.co.uk/itm/231970494058 Would anyone be interested?
- 5 replies
-
- bodywork
- honda civic mb
- (and 3 more)
-
- 1 comment
-
- 2
-
- honda civic mc
- honda civic aerodeck
- (and 3 more)
-
- 1 comment
-
- 2
-
- honda civic mc
- honda civic aerodeck
-
(and 2 more)
Tagged with:
-
-
- 3
-
- honda civic mc
- honda civic aerodeck
-
(and 1 more)
Tagged with:
-
-
hi, i have a 2001 civic aerodeck d16 sohc vtec and im putting in a b16a sir engine , im just looking a few tips to help me along the way like wiring looms ,could i use my own and could i use my own engine mounts? thanks
-
-
- 3
-
- honda civic mc
- honda civic aerodeck
- (and 6 more)
-
- 4 comments
-
- 2
-
- honda civic mc
- honda civic aerodeck
- (and 6 more)
-
- 2 comments
-
- 3
-
- honda civic mc
- honda civic aerodeck
- (and 5 more)
-
Hi. I have a pretty standard mc1 aerodeck, I have just fitted shocks and springs from an mgzs 120. Is there adjustability in the standard suspension to get the geometry changed. Eg camber castor toe in/out? It feels like it could do with some alignment. I'm also finding the ride from the mg suspension quite harsh yet bouncy. I'm thinking if it's going to be an uncomfortable ride then I may as well put lowering springs on and make it look good. Any recommendations? Handling is vastly improved using the mg suspension as well as the 180 rear arb. Thanks
-
So figured I'd start a thread , the car was sitting on the drive over the weekend staring at me..... So me n the wife got bored and did the wing. This is (I can feel it already) the start of what I feel is going to be a never ending list of stuff to do. **additional** Just got heavily scorned because I didn't acknowledge my wife's wonderful work of the front grille area. (I don't have a pic of it ATM)
- 15 replies
-
- 1
-
- honda civic aerodeck
- honda civic mc2
-
(and 1 more)
Tagged with:
-
Time again folks, lets get this one rolling! Put forward the Civic M's you think should win this months car of the month. Can even be your own civic! @dogg1210 @ammarbm @Derek89
- 95 replies
-
- honda civic ma
- honda civic mb
-
(and 2 more)
Tagged with:
-
Can anyone on here photo shop I've idea in my head and I can see how it looks in my head...just want it done on paper in front of me.... Everything seems better in your head lol And save me pumping out more money if looks stupid Cheers in advance
-
Hi. Does anyone know the size of the bolt that holds the rear shocks to the trailing arm. Mine is stuck in on both sides so will have to angle grind the head off and drift it out. I want to get the replacement bolts before I start so I can do it all at once. Cheers
-
Hello Everyone, I've got to change my O2 sensor for the exhaust manifold one. I don't really want to buy a £250 one from dealers. I've tried to look around and best I found was this: http://www.ebay.co.uk/itm/181503439204 NGK one (NGK0299) - OZA333-H26, Can someone tell me if this will suffice? Its for a Mc1 aerodeck 1.6 vtec 125 D16W4 engine. Some places I see 4 or 5 pin. 500m, 650mm, 350mm ,320mm. My car is a 1999 if that helps. I have tried the search but couldn't find a solid answer. Any more questions please fire them my way Many Thanks
- 13 replies
-
- honda civic mc
- honda civic mb
- (and 5 more)
-