Search the Community
Showing results for tags 'honda civic mc'.
-
when getting the steering wheel grab the airbag/horn ring with all wires and the 4 screws for ring pink wire and white wire are not needed. green wire is horn . red/yellow wire and red wire are for airbag before staring disconnect battery t30 star key to take airbag off unplug airbag and horn and earth wire make shore steering wheel straight 19 mm socket to undo center nut and take column cover off 3 philips screws then there 3 philp screws holding on airbag/horn ring on honda horn wire is red join to mg green wire airbag honda yellow wire to mg red wire and honda green wire to mg red/yellow wire do not solder with airbag plugged in as the heat can set it off put mg airbag ring on column screw 4 philips in. plug wire in. put column cover back on. put steering wheel on. plug airbag and horn in all in and working and srs airbag light is off but dont no if it will work in a crash and i'm not gonna crash it to test that part this is a guide so you will bee doing this at your own risk
- 9 replies
-
- 4
-
-
- honda civic aerodeck
- honda civic mc1
- (and 5 more)
-
I've been looking around for a little bit of information but the main info I've found is related to the MB6 VTI-S.. I have a 1.4 Sport MB (MB3 / MB8 depending on who you speak too!) it has Half leathers, AC, PAS, Leather stitched wheel (did until I yanked it out for a Vertex wheel), Electric Windows (front), Electric Mirrors (adjust & Heat), carbon-look trim around knob, grills etc, Leather stitched honda gear knob. Now apart from the MB6 which has 99% the same interior I have found, what other differences across the range have what? I know theres that wood/tortoise shell looking trim option too but wondered if there was anything exclusive to the VTIS/VTI/Sport? and I was lead to believe the VTIS was the only model in Pirated black, Theres a 1.6 VTEC MB round the corner in PB, doesn't have wing or anything like the trim, has stock fabric seats, no AC yet the colour is definitely black that flips into purple as PB does.. Ideas?
-
work i done on the first week of owning car new front caliper and painted fixing door lock put my rover 400 alloy on look better that the 13" still wheels painted grill black
- 6 replies
-
- 2
-
-
- honda civic mc
- honda civic aerodeck
- (and 1 more)
-
Sadly, the Deck doesn't get a mention : http://retrorides.proboards.com/thread/190984/load-luggers-parts-haulers-esp
-
This month's entries: @powerofdreams @dogg1210 @DeLaSoul @Jayhoath83 @mb690
-
Hi guys, my aerodeck has some skunk2 lcas from a dc2 integra. They aren't the fork type rear shocks that are usually fitted to mbs etc. Will the mgzs arb or mb6 arb still fit with these lcas? There is a tapped hole on the lcas. cheers
-
Hi guys, swapped my mb6 for a aerodeck a couple of weeks ago. Needed the extra boot space. The deck isn't in as good condition as the mb6 but I'm slowly working through the faults etc. First of all I replaced the two rear tyres with some new toyos, and just yesterday fitted my hks 4-1 manifold with 2.5" collector, 2.5" decat and then I made a custom 2.5" b pipe leading to an apexi back box. I'm going to band some steelies for it, get a rear anti roll bar and replace the worn bushes and underseal it. Going to be on the lookout for a car at the local scrappies in the same colour as a lot of the panels have been keyed but I'm loving being back in a deck.
-
right anyone wanting poly bushes but don't want to get raped for em. use http://www.strongflexuk.co.uk/ they usually take about a week to arrive but are good quality and cheaper than most other places! they also have a category for our cars!!
-
Another two horse race! @Dave @dinochips
-
Engine managment light came on last night, checked the codes first thing this morning :- 9 CID Sensor (Number 1 Cylinder position) defective circuit or unplugged / defective sensor (car is running fine, rev counter sitting slightly higher but sure that is down to a sticky clocks) can anyone help me out on what this could be? cheers.
-
Need some help , I understand my aerodeck currently sits upon the mg zs suspension setup , however I want to replace but not lose the ride height , will a coilover set provide me with at least this ride height (with a firmer setup) or am I going to need to look elsewhere ? I know it sounds silly but im confused.
-
Hi. I've swapped the standard honda suspension on my aerodeck for the mgzs set up. Now it's not great suspension a bit mushy. I'm looking at fitting lowering springs so at least it'll look good. Might stiffen it up as well. My question is which lowering springs. I can't seam to find much for the mgzs. What is there out there tried and tested. Putting honda specific lowering springs onto mg shocks doesn't make sense to me as it's a set of springs designed for a different set of dampers than the mg ones. Correct me if I'm wrong. I'm not going to spend a fortune on meisters etc. I'm not building a track car just something decent for daily use while I build a proper rwd track car. Cheers. Nathan
-
I bought new Rota Spec R wheels for my deck. Love the wheels but i have a problem at the rear wheels. The center caps don`t fit because the wheel hub comes out of the wheel hole... Pic of the problem. Anyone have a solution to this problem?
-
Hi, I was wondering how dc2 recaros fit in the interior, does it take more space then the oem seats? My oem seats are rubbing the armrest, so I want to know if they take more place then the oems?
-
Morning all, I've been in touch with the suppliers of these fiberglass body parts to ask about some wings. They don't do them for ms, but I asked how many they would need to make it worth while. He said for a special order they'd be wanting 7-10 pairs @ £190 per pair, plus delivery. This is their ebay listing for egs... http://m.ebay.co.uk/itm/231970494058 Would anyone be interested?
-
@dogg1210 @vti vroom -
- 1 comment
-
- 2
-
-
- honda civic mc
- honda civic aerodeck
- (and 3 more)
-
- 1 comment
-
- 2
-
-
- honda civic mc
- honda civic aerodeck
- (and 2 more)
-
-
- 3
-
-
- honda civic mc
- honda civic aerodeck
- (and 1 more)
-
Japday-
- 3
-
-
- honda civic mc
- honda civic aerodeck
- (and 6 more)
-
Japday- 4 comments
-
- 2
-
-
- honda civic mc
- honda civic aerodeck
- (and 6 more)
-
Japday- 2 comments
-
- 3
-
-
- honda civic mc
- honda civic aerodeck
- (and 5 more)
-
Hi. I have a pretty standard mc1 aerodeck, I have just fitted shocks and springs from an mgzs 120. Is there adjustability in the standard suspension to get the geometry changed. Eg camber castor toe in/out? It feels like it could do with some alignment. I'm also finding the ride from the mg suspension quite harsh yet bouncy. I'm thinking if it's going to be an uncomfortable ride then I may as well put lowering springs on and make it look good. Any recommendations? Handling is vastly improved using the mg suspension as well as the 180 rear arb. Thanks
-
Time again folks, lets get this one rolling! Put forward the Civic M's you think should win this months car of the month. Can even be your own civic! @dogg1210 @ammarbm @Derek89
-
Hi all , new member , bought a VTI recently and the wife and I love it , I believe it's a previous members car. Would love to get in touch with them , I like knowing a cars history and chatting to like minded fans. Reg is X298GLE
