Search the Community
Showing results for tags 'vtec'.
-
So how many lambda/02 sensors does the MB6 Civic originally have? My car had aftermarket exhaust system since i got it, so i have no idea what's the most ideal/original position of lambda/02 sensor. And also does it originally come with 1 or 2 sensors? If 2 then where does the other one go to? I've never had OEM cat so where does to 02 sensor go to? I know that there is supposed to be at least 1 sensore before the cat or at the cat... Does the OEM header/exhaust manifold have o2 connection or was it directly on the cat itself? I have aftermarket header with plugged o2 connection and the lambda is currently connected directly to aftermarket cat since it already had a connection to it. But is the best place for the sensor at the end of the header pipe before the cat starts? I'm asking all of this because i have constant issues with high emissions. I'm trying to rule out things. ECU could cause all sorts of readings depending on the set up... Right now i'm going to replace the rusted header if that helps. If the header leaks somewhere, it could lead to surprisingly big emission issues. ECU for instance could assume that the engine is running too lean, and compensate it with more fuel so that it runs rich... Has anyone changed thermostat, coolant/radiator cap, coolant temperature sensor? Many people here have issues with emissions on B18c4. So did any of those things fix the issue for someone? Or does the car need a OEM cat? ECU issue regarding non-OEM parts used? These cars doesn't seem to like some of the aftermarket parts if i'm not wrong...
-
Hi everyone, long time visitor first time poster , I have a 1997 MB2 base model with a d14a8 in. Over the past few month i have been preparing the car as a track car. I have done a reasonable amount of work onto the d14 (Cambelt, aux belts, valve lash, oil change, z6 intake mani, cold air intake, new fuel filter etc) however, recently it has felt very down on power and the car is vibrating a lot. There is no audible knock or rattle from the engine however when doing a routine check i discovered metal filings on the dipstick. Rather than plowing more money into a d14, which other D series would be a straight swap? I know its not as simple as that but I'm looking to do this swap over a weekend with a few a mates. I know the mechanical aspect of doing a swap very well however I am completely clueless with what to do with the wiring. Can anyone give me some ideas?
- 4 replies
-
- 1
-
-
- honda civic mb
- engine
- (and 4 more)
-
I tried to change the original PCV valve with a new aftermarket one (cheap). It was hard to remove the old one and it cracked in two pieces. I got it all out eventually while very frustrating. Putting the new one was surprisingly hard too. I did attach it to the hose surprisingly easily but it was hard to press the new valve back into the hole. There's no space so hard to apply any strengh. I'm not sure if it's all the way down. It looks pretty good but i think it could be a little off. The aftermarket valves rubber part was a bit longer than in the old OEM one. Maybe that makes it hard too. Anyway tried to start the car after all the work and i think the idling is a bit off. It could be running lean or rich if i installed it wrong... There is some smell and exhaust gas smells a bit rich too although i always had trouble with emissions/car running too rich. Also the car is using oil so that's also the reason for trying to change pcv valve. I haven't test driven yet but i'm afraid i could've made things worse. Might have to take the car to a car mechanic. Tried to save some money by doing it myself because the valve is in a bad spot in these engines as you may know. Is it harmful to the engine if i installed it badly? Is running rich or lean harmful to engine? When i pressed the gas pedal at idle it didnt sound healthy/strong. Choking sounds and hesitating sound but the pedal feel was normal. Should i try to drive the car or let someone take a look?
-
Does anyone have bad experiences with light flywheels on MB6 Civics? Any difference in Dual mass or Single mass? Single mass is preferred overall i suppose but in some cars there is some chatter/noise at idling or decelerating. Any such symptoms with MB6? Any difference if stock clutch is matched with lightweight flywheel? My leg cramps easily with heavy pedal feel so i'm not really looking for stage 1 or stage 2 clutch etc. I've been looking into ACT streetlite flywheel (5.6 kg). Weight seems okay compared to some lighter ones and is single mass. I want to hear about risks and rewards for daily use. Rattling noises worry me. especially idling.
-
I noticed this advert recently. It is not my car and I have absolutely no connection with the seller. It apparently needs a new exhaust system as the cat was stolen and they cut through the pipes. It also has an expired MOT. In my opinion that would be worth having and repairing for £350. It's no good to me as it is too old for the London ULEZ. https://www.autotrader.co.uk/car-details/202109297922634
-
Hi all, I'm planning to do a mini-me on my 1.5 Vtec-e I've read a lot about it but two things I'm not sure of, will it run (good) with a P30 ECU from a Civic del sol, or do I need the P28 ECU? And a adjustable cam gear is not necessary because I'm not changing cam only but the complete head? I'm able to buy a complete D16Z6 engine, costs are low because of oil consumption, engine has run 130 Miles. Regards, Patrick
-
A 1.6 VTEC Aerodeck that is suitable for my purposes as it meets the London emissions rules has come up for sale. Unfortunately It is almost 150 miles away with no MOT. That makes going to look at it a problem with lockdown and the risk of being fined. Whenever these cars come up for sale they are never anywhere near London. The mileage is 139,000. Seller claims the manual gearbox is noisy. Asking price is £300. It failed an MOT earlier this month on the list of problems below. Looking through its history it has never failed on any structural rust which is a good sign. These defects seem like they could be sorted fairly easily. Does this seem like it could be a worthwhile project? Do not drive until repaired (dangerous defects): Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) Repair immediately (major defects): Offside Stop lamp(s) not working (4.3.1 (a) (ii)) Service brake excessively fluctuating both front (1.2.1 (e)) Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b)) Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b)) Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c)) Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b)) Repair as soon as possible (minor defects): Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i)) Monitor and repair if necessary (advisories): Oil leak, but not excessive (8.4.1 (a) (i)) Fuel filler hoses heavily corroded Nearside Front Service brake binding but not excessively (1.2.1 (f)) Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing (5.3.4 (a) (i)) Brake disc worn, pitted or scored, but not seriously weakened front (1.1.14 (a) (ii))
-
Engine is coming back out got loads of new bits to fit that will make this car 1000x better. Come along way from the little 1.4 mb2 I bought for £200 18 months ago. please share the love H22A U2q7 LSD gearbox (ATR) original H22 timing covers. full through custom exhaust (once engine is back in) full poly bush engine and gearbox mount kit for H22 Evo 5 4pot Brembos aluminium 3 core racing rad fresh painted rocker cover (wrinkle red) and gasket recaro trendlines (ATR) aluminum sump and gasket going to be my project over Christmas to get all of these fitted. any info on gearlinkage would be helpful! IMG_8685.MP4
-
© back to the past
-
© back to the past
-
I'm looking at swapping out my 1.4 for potentially a F20B6 motor, I'm new to this and was wondering how possible this is and where I could get engine mounts from and would my trans bolt to it or would I need to swap a different one into it? Really need help as I have a motor planned and money ready I just need to make sure this isn't a mistake Thanks
-
Saw this YouTube video and an Aerodeck had a cameo roll; Skip video to 7.59 for Aerodeck!
- 6 replies
-
- 2
-
-
- honda civic aerodeck
- honda civic mb
- (and 5 more)
-
Hello people! I bought a 1997 Honda civic mb3 D15Z8 .. I have many ideas on visual effects.. But i cant find any visual parts online.. Neither here in portugal where i live or just in the world. Im Bulgarian but i live in Portugal. If anyone can help with mods or ideas.. some part websites or such. I will be gratefull! For now i have Rims 14 but i will soon buy 15´s. Im Also in search of body kit parts mostly front and rear bumper. Darkened front headlights and such! I would love if you guys can help me! Regards!~~
- 16 replies
-
- 1
-
-
- honda
- honda civic mb
- (and 1 more)
-
I want to introduce my lovely Pirat Black MB2. I bought it from the scrap yard for 300€. No working brakes,no working suspention,nothing...except the engine...the engine was like a new one.1,4 90hp 90k km. I startet with the brakes and the bushings. All new ones. So...The brakes was the first thing. New discs with new pads and two new calipers. The suspention was on second place. New bushings kit from Energy Suspention for the whole suspention. Koni shocks. I drived 70 000 km for two years. After that i take a desision that i have to change something with the engine. I read a lot of things about the minime set up(D14 block with Vtec head) But one sunny day a friend of mine send me a photo from a Del Sol(show off car) with only 70k on the clock. The engine-D16z6,the price 800€.Only the engine,the doors and the plastics of the car were not rotten.I boight the whole car for 800€ So i deside to put the engine in my car. Someone told me that is plug and play. Aaaaaaand it was not. I rewire the whole cables from the engine to the ECU. That was such a fun. But at the end it all went good. After that i thought that i could make some changes in the interior of the car. I put beige seats from Rover,black roof from alcantara(self made with my wife),arm rest from VTI I want to apollogise for my bad english. Be save and kick the vtec till the end
-
https://www.pistonheads.com/news/ph-japanesecars/honda-restomods-s2000-and-ek9-civic-for-tokyo/41515 S2k looks nice
-
I watched a DC2 vid on youtube and thought i check up the reg plate on dvla MOT/TAX checker to see if its still on the road......to find this amusing advisory lol. Couldnt believe it at first and wondered if that was even allowed to come up there made me chuckle a bit too haha...
-
Now Just need to get my springs on ,45mm be alright?- 3 comments
-
- 2
-
-
- honda civic mb6
- honda civic vti
- (and 2 more)
-
- 5 comments
-
- 1
-
-
- honda civic 5 door hatch
- vtec
- (and 4 more)
-
- 5 comments
-
- 2
-
-
- honda civic mb
- vtec
- (and 4 more)
