KiNK43
-
Posts
7,327 -
Joined
-
Last visited
-
Days Won
348
Content Type
Store
Calendar
Forums
Gallery
Downloads
Everything posted by KiNK43
-
What the metal piece?? Just get a metal coupler or joiner whatever you want to call it. Undo clips on the piece to remove, take it out and join the rubber hoses together with your coupler and clips. Or alternatively can do what I've now done. Is removed all the little hoses. Bypassed the throttle and just ran a new longer hose from the the port on the head straight to the iacv.
-
Getting there mate. Life can be a trial at times ay
-
No stink that I've noticed. Been using like that for donkeys now
-
Looks like a real stunner man!!!! Fair play persevering! The other guy sounds a right douche!
-
Very smart dude!!!
-
Got myself a fresh mot this morning. All is good! The tester may Need glasses tho as he put thr emissions tester thingy in a nearby suzuki by mistake
-
Wkd stuff. Crazy they came out that easy. Heat wouldn't touch mine. Either of them. So ended up grinding them out and replacing with a nyloc nut and bolt. Easy peas next time
-
Sweet good stuff man!!
-
Undo the two bolts holding caliper to carrier and where the bolts come out of they are the sliders. There's a rubber boot around them. Often they stick so pulling them out cleaning up and regressing will sort them
-
Not the pin through the handbrake cable is it??? Ohhhh man that sucks.
-
Cool cool good stuff going down
-
Yeah that's what I mean still do aerodecks diagnoly. And yeah furthest away.
-
80 quid worth a punt for me. I've spent more on dumber stuff that's for sure
-
They are ebay specials. Some people say they are pretty good. I've never used them so no opinion really. Other than you tend to get what you pay for. Whether that means the ride is bad or maybe they leak a year down the line. I don't know.
-
Bollox that is! Should be done diagonally. As that is how the prop valve distributes.
-
My PB MB9 Aerodeck! Engine rebuild in progress
KiNK43 replied to vtec2011's topic in Honda Civic MA/MB/MC
They don't look that bad. -
My PB MB9 Aerodeck! Engine rebuild in progress
KiNK43 replied to vtec2011's topic in Honda Civic MA/MB/MC
Lookjng good dude. Cracking on nicely. There is some mb6 shocks with lowering springs on civic life at min..thought 6ou may be interested. http://www.civiclife.net/board/topic/159156-mb6-shocks-with-lowering-springs/#entry2070485 -
Brake master cylinder - Labour costs? - MB6 Civic 1.8 VTi
KiNK43 replied to Roj's topic in Brakes and alloys
Well shouldn't be. Depends on the garage I suppose. Some places are a reasonable 30 quid an hour some are more. -
Oh sweet. Good stuff then yeah. Wanted to get mine on today but properly cat n doggin it into next week at the minute!
-
Brake master cylinder - Labour costs? - MB6 Civic 1.8 VTi
KiNK43 replied to Roj's topic in Brakes and alloys
2 hours tops. Hour to fit. Hour to bleed I'd say. -
Good call with the zs discs. Bet they stop a treat. Any update on those pads? ? Noticeably better than standard?
-
Going to town. Like it
-
Speed Equip Aerodeck Vti-s **Breaking complete car ** 02/18
KiNK43 replied to 10000rpm's topic in Honda Civic MA/MB/MC
Again stunning man. -
Any of those are fine. Sure a p30 is basically a jdm p28. So unchipped it has a speed limiter and used a couple of extra sensors. Vtec oil pressure and knock? ?? But once chipped everything is changeable. Yes you need to cut the a plug tabs. It'll become obvious when you try plug the ecu in and there will be two little plastic tabs stopping the plug going in. Personally I use a p28. HTune socketed it and added iab control. Which seems good quality and all ok. But there base map was awful. 40 quid for a useless chip. Made s**t power. Didn't idle well and customer service was awful.
-
Yep that's the way. I've always done that when buying new sensors anyway. I'll buy whatever ntk sensor is cheapest on ebay cut plug off and extend put honda plug on
