Search the Community
Showing results for tags 'honda civic mb'.
-
Hey guys, my my mates got a ZS spoiler witch he's looking to replace/upgrade and he wanted me to find out, if he sells it on, what would he get for it?? if this should be in another section please move it on cheers
-
adding vit front lip and vits rear lips today, pics will be added
-
I would like to replace the heater core (matrix) cause it is leaking coolant. For this I have to take out the heater unit behind the dash. I saw at the service manual that I have to take out the evaporator first. Does anyone know if I can take the heater core out without taking out completely the evaporator but only unscrew it and pick it up a little so as to free up the heater unit to come off? Thanks
-
Well since I have been on this forum for a little while now I suppose I should show how the civic is going even though there is plenty to come! This is the way i bought her, clean unmodified (except from the back box) was perfect to start with. The car was very well looked after when i got her FSH inside was immaculate one arch needed done but that didnt bother me it was straight into the paintshop for repair with a new panel. The power of the b18 still impresses me for the age of the car! From there I hated the original 5 spoke just not my taste so I purchased a set of speedlines in need of refurb. This is them after a sandblast and powdercoat primer. Some how it wont let me put more picture in this post so i will continue below!
-
Hi everyone, today i went to a shop to remap my mb6 with s2 intake, 66mm tb and full exhaust 2,5". give me some opinions please 205hp and 200 thanks
-
Hey guys, Bought a Honda Civic 1.6 LS, off for vehicle inspection & MOT today, wish it luck lol the guy who sold it to me didn't bother driving it for a few months & left it to rot on his driveway. He planned on using it for track racing, but had other priorities. Was a gamble & is it hard to find exterior parts, but thanks to this forum I've found a few! I will take some pictures in the upcoming weeks ahead.
-
Vti half leather vti clocks vti centre console with arm rest vti front lip vti rear spoiler vti's fan blades straight through centre and rear exhaust but that's coming off as it too loud cut springs lol aftermarket air filter De-badged and painted front grill
-
As above, my mb6 every now and again will hesitate on part throttle when cruising. I can accelerate a bit more and it will then be fine. Anyone ever had any similar symptoms? cheers
-
about time I got some pic's taken
-
Hey ho. As some people might already know i ran over a badger. So now I need to replace my front bumper, but where can i find one? It shouldhave a "Materialgutachten" (a certificate which we need here in Germany to be able to put bodykits on our cars). I'm searching for weeks but I can't find anything, only lips or stuff for show-cars. Thanks!
-
Time again folks, lets get this one rolling! Put forward the Civic M's you think should win this months car of the month. Can even be your own civic! @dogg1210 @ammarbm @Derek89
-
Heres my mb2 1.4 sport i bought for £250 near a year ago. No mot at time but 3 tyres and service it passed no problems. Since then ive replaced window regalator fitted 15 tsw with 4 toyos cf2 tyres till i get new wheels in 2months. Have big plans for this car as ive never seen a 1.4 in this colour and it stands out in the sun. Body work dose need a bit of work but good for its age, will be sorted after i come back from holidays. Bought a d16y8 engine to turbo also, it will be worked on while body work is getting painted.
-
Hi, I realise this may have been covered in the past or may be common knowledge for a lot of you guys but I am a little confused by it. I see two options with oil choice, 10/40w or 5/30w. Semi or fully synthetic? What does everyone use? Thanks
-
Hi guys, I've picked up a PLM 2.5" exhaust manifold and wondered whether the flange will connect to my 2 1/4" decat or will I need to weld a 2.5" flange on? I'd take it off the car, but it's a lot of faff if it's not going to fit.
-
Hi, I'm about to replace the front speakers in my MB3 and I'd like to get some fitting adapters, without having to make them out of MDF, I've heard people mention that some Vauxhall one's will fit bit the never mention the model or year. Thanks in advance!
-
Does anyone know if you can get a panel filter (air) upgrade for the mb's? Ie pipercross/k&n etc. Don't really like the cone filters Thanks
-
Hi all, I bought this vti off my mate,he was the last owner for 10 years so i know the car,full service history,red key,2 black keys,red master key fob,2 black key fobs and ir key fob.manuals ect. It had a fuel leak from the tank so he took it off the road and that was it for a year until he agreed to sell. £200 in my favour Its a 98 model in baikal green with 131000 on the clock. I plan to get it back to its former glory with some mods along the way.im doing it on a small budget so alot of things will be re fabricted to save costs. This is how it was when i got it home needs most of the attention to the bodywork.needs a few little bits and pieces for the mot,first off,fix the fuel leak. He's already done a few little mods including, full leather,jazz washer jets,smoked side repeaters,painted the cam cover,recon rear calipers painted red,a crap induction kit and a crap stainless back box. Bonnet is trash,laquer has gone white. Headlight washer missing but have 1 to hand,fogs beyond repair but have some to hand. This arch isnt too bad but needs doing the other side has been repaired but needs re working. I know the intake is laughable but that will be binned asap!
-
WANTED!! any red vti front lip , side skirts to fit my baby!! would like them to be cheap if possible ..i know its a long shot...thought i'd ask any lowered suspension would be cool too, or info on where to get some that will fit mine any help would be great !!
-
-
Will the drive shaft seal of my s9b fit the s4c box
-
Good evening guys, as on my mb3 project thread. so I've bought a set of meisterR coilovers from someone braking a mc2 turbo. I just thought they would be zeta s. however when they arrived I noticed they say meisterR zeta pro, just I haven't seen zeta pros before. Does anyone know much about these. They came in a meisterR box labelled as MB/MC thanks /MC.
-
GSF can and do supply Honda service parts etc. http://www.gsfcarparts.com/ If you input discount code "apr43" today 24/04/16 (offer ends midnight tonight) you'll get 43% discount. If you have discount codes for other Sites, don't be shy about sharing 'em
-
- 2
-
-
- honda civic mb
- honda diy guide
- (and 1 more)
-
I bought a set of springs and shocks for my mb2 1.5vtec and they give a ride similar to oe springs and shocks as the rates are follows Damper rates are:0.3301 m/s velocity75mmFronts12-1300 nm rebound700 nm bumpRears750 nm rebound600 nm bump If someone could change these into kgs instead of nm so i have a better idea what the damper rates are as i dont work in nm as i dont have a clue about that side of things as its kgs etc i work in.
-
Hi guys. you may remember about 7weeks ago I posted pictures of my Orleans blue mb3 project, the cars now just gone over 28k now. so after speaking to many insurance companies and finding the policy I'm going with, I've started buying parts to start the build early May time. so this week I bought, where to start. Meister r zeta s coilovers mb6 hub swap with calipers cyberspeed LCA's Mb6 Arb 1 inch MC hel braided brake lines mg zs spoiler (needs painting) honda mist spray windscreen washers vti front lip (needs painting) handbrake cables due to only having drums on the rear. i've also got a backbox being made as my old one snapped, will be paired with my 2.25 inch stainless system with decat. i've also fitted my Jordan wheels just for the mean time. things needed still, a set of black 16 inch alloys with good tyres ideally the accord sport. new discs and pads extended top mounts. what would people recommend for discs and pads?? Thanks for your time.
