Jump to content

noodels

Civic5 Supporter
  • Posts

    4,657
  • Joined

  • Last visited

  • Days Won

    24

Everything posted by noodels

  1. https://civic5.com/forum/topic/3647-mc2-project-chassis-prep/?page=1 This may come in handy
  2. Well done on the install,not seen this for a while
  3. Could Just smash the DC2 casing if you have it !<the one from under wheel arch> with a hammer, its very brittle..and mate the 2 pipes together with tape,its a great route for the CAI with correct air transition <flow> the MB one does not fit the DC2 Box,its a much bigger intake pre airbox side.. loads of stuff on the web regarding the above
  4. cut my DC2 resonator open and all the stuff needed is there,if you have one that is..
  5. Should I just rip the bulb out and be done with it? That sorted mine out..^^
  6. Agree ^^ OEM wheels look very nice,wish I had a spare set ..
  7. Put them in my S2000,they just don't use Stainless steel inserts,not a problem for me
  8. Even Skunk 2 are not up to the job,my rear top camber links are f**kd , failed the MOT.removed them for now, rebush are £10 a pair <one bush> so x4
  9. Checked the valve clearance recently?
  10. Wonder what the total kg for each car is ?
  11. Engine on the MGZS 180 is much heavier than Honda B series,so damper & springs rate are not correct for MB/MC.
  12. Never here of that before ..and not sure either better put them on the scales when it arrives should have got ITR R one made of alloy box
×
×
  • Create New...